iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 10555-4:2000

(Main)

Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996)

Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996)

Migrated from Progress Sheet (TC Comment) (2000-07-10): This WI will probably go to a PV procedure. ++ Target dates agreed under Resolution BTS3 H C4/1992.

Sterile intravaskuläre Katheter zur einmaligen Verwendung - Teil 4: Ballondilatationskatheter (ISO 10555-4:1996)

Dieser Teil der ISO 10555 legt Anforderungen für Ballondilationskatheter fest, die steril geliefert werden und zur einmaligen Verwendung bestimmt sind.

Cathéters intravasculaires stériles, non réutilisables - Partie 4: Cathéters de dilatation a ballonnets (ISO 10555-4:1996)

La présente partie de l'ISO 10555 fixe les prescriptions relatives aux cathéters de dilatation à ballonnets, non réutilisables, fournis stériles.
NOTE 1 L'attention est attirée sur l'ISO 11070, qui fixe les prescriptions relatives aux dispositifs accessoires pour utilisation avec les cathéters intravasculaires.

Sterilni žilni katetri za enkratno uporabo - 4. del: Balonski katetri za širjenje žil (ISO 10555-4:1996)

General Information

Status
Withdrawn
Publication Date
31-Dec-1999
Withdrawal Date
03-Oct-2013
ICS
11.040.25 - Syringes, needles an catheters
Technical Committee
VAZ - Healthcare
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Oct-2013
Due Date
27-Oct-2013
Completion Date
04-Oct-2013
Ref Project
EN ISO 10555-4:1997 - Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996)

Relations

Replaced By
SIST EN ISO 10555-4:2013 - Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2013)
Effective Date
01-Nov-2013
Corrected By
SIST EN ISO 10555-4:2000/AC:2002 - Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996/Cor.1:2002)
Effective Date
22-Dec-2008
Replaced By
SIST EN ISO 10555-4:2013 - Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2013)
Effective Date
08-Jun-2022
Corrected By
SIST EN ISO 10555-4:2000/AC:2002 - Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996/Cor.1:2002)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 10555-4:2000EN ISO 10555-4:2000
PreviousNext
Standard
EN ISO 10555-4:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sterilni žilni katetri za enkratno uporabo - 4. del: Balonski katetri za širjenje žil (ISO 10555-4:1996)Sterile intravaskuläre Katheter zur einmaligen Verwendung - Teil 4: Ballondilatationskatheter (ISO 10555-4:1996)Cathéters intravasculaires stériles, non réutilisables - Partie 4: Cathéters de dilatation a ballonnets (ISO 10555-4:1996)Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996)11.040.25Injekci
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11608-5:2023(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2022)
EN ISO 11608-5:2023

This part of ISO 11608 specifies requirements and test methods for needle-based injection systems with automated functions (referred to in the standard as NIS-AUTO), for the administration of medicinal products in humans. This document does not cover remote communication from the NIS-AUTO.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80369-3:2016/A1:2023(Amendment)
Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO 80369-3:2016/Amd 1:2019)
EN ISO 80369-3:2016/A1:2022
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-3:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths (ISO 11608-3:2022)
EN ISO 11608-3:2022

This document specifies requirements and test methods for design verification of containers and
integrated fluid paths used with Needle-Based Injection Systems (NISs) according to ISO 11608-1.
It is applicable to single and multi-dose containers either filled by the manufacturer (primary container
closure) or by the end-user (reservoir) (e.g. cartridges, syringes) and fluid paths that are integrated
with the NIS at the point of manufacture.
This document is also applicable to prefilled syringes (see ISO 11040-8) when used with a NIS (see also
scope of ISO 11608-1:2022).
This document is not applicable to the following products:
— sterile hypodermic needles;
— sterile hypodermic syringes;
— sterile single-use syringes, with or without needle, for insulin;
— containers that can be refilled multiple times;
— containers intended for dental use;
— catheters or infusion sets that are attached or assembled separately by the user

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-2:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022)
EN ISO 11608-2:2022

This document specifies requirements and test methods for single-use, double-ended, sterile needles
intended to be used with some needle-based injection systems (NISs) that use a non-integrated doubleended needle according to ISO 11608-1.
This document is not applicable to the following:
— needles for dental use;
— pre-attached syringe needles;
— hypodermic needles;
— needles intended for different routes of administration (e.g. intravenous, intrathecal, intraocular);
— materials that form the medicinal product contact surfaces of the primary container closure.
However, while this document is not intended to directly apply to these needle products, it does contain
requirements and tests methods that can be used to help design and evaluate them.
NOTE Needles provided by the manufacturer integrated into the fluid path or container are covered in
ISO 11608-3, and hypodermic needles provided separately are covered in ISO 7864.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-1:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022)
EN ISO 11608-1:2022

This document specifies requirements and test methods for Needle-Based Injection Systems (NISs)
for single-patient use intended to deliver discrete volumes (bolus) of medicinal product, which can
be delivered through needles or soft cannulas for intradermal, subcutaneous and/or intramuscular
delivery, incorporating pre-filled or user-filled, replaceable or non-replaceable containers.
This document applies in cases where the NIS incorporates a prefilled syringe. However, stand-alone
prefilled syringes defined by ISO 11040-8 are not covered by this document (see exclusions below).
It is important to note that other functions and characteristics of the prefilled syringe, such as dose
accuracy, are subject to the requirements (delivered volume) in ISO 11040-8 and not this document,
unless the addition impacts the delivery function (e.g. a mechanism that intends to restrict or stop
the plunger movement, which would limit the dose delivered). In that case, the system is completely
covered by this document and applicable requirements of the ISO 11608 series.
Excluded from the scope are:
— stand-alone prefilled syringes defined by ISO 11040-8 (with noted exceptions above);
— NISs that provide continuous delivery and require a delivery rate clinically specified in the medicinal
product labelling or determined by a physician based on clinical relevance (i.e. medication efficacy)
as would be the case with insulin patch pumps or traditional infusion pumps (e.g. IEC 60601-2-24,
ISO 28620) associated with continuous delivery of medicinal products (e.g. insulin);
— NISs with containers that can be refilled multiple times;
— requirements relating to methods or equipment associated with user filling of containers unless
they are dedicated accessories (a component necessary for primary function, whether included in
the original kitted product or not);
— NISs intended for dental use;
— NISs intended for different routes of administration (e.g. intravenous, intrathecal, intraocular).
NOTE These products that are excluded might benefit from elements in this document but might not
completely fulfil the basic safety and effectiveness of such products.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-4:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022)
EN ISO 11608-4:2022

This document specifies requirements and test methods for needle-based injection systems (NISs)
containing electronics with or without software (NIS-Es).
The needle-based injection system containing electronics can be single use or reusable and can be
operated with or without electrical/conductive connections to other devices. The system is intended to
deliver medication to a patient by self-administration or by administration by one other operator (e.g.
caregiver or health care provider).
This document applies to electronic accessories that are intended to be physically connected to a NIS or
NIS-E according to the NIS/NIS-E intended use.
This document also applies to electronic accessories that are intended to have electrical/conductive
connections to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document does not specify requirements for software in programmable NIS-E.
NOTE IEC 60601-1:2005+AMD1:2012+AMD2:2020, Clause 14 addresses software life cycle processes.
This document does not specify requirements for cybersecurity.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 26825:2022(Main)
Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance (ISO 26825:2020)
EN ISO 26825:2022

This document gives requirements for labels attached to syringes so that the contents can be identified just before use during anaesthesia. It covers the colour, size, design and general properties of the label and the typographical characteristics of the wording for the drug name.
NOTE National or regional regulations might require additional labelling, which can include bar coding. No requirements for this additional labelling are given.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80369-5:2017/AC:2022(Corrigendum)
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications
EN 80369-5:2016/AC:2021-06

2021-06-25 - IEC Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80369-7:2021(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2021)
EN ISO 80369-7:2021

This document specifies dimensions and requirements for the design and functional performance of
small-bore connectors intended to be used for connections in intravascular applications or hypodermic
connections in hypodermic applications of medical devices and accessories.
EXAMPLES Hypodermic syringes and needles or intravascular (IV) cannulae with male and female Luer slip
connectors and Luer lock connectors.
NOTE 1 See Annex A.
NOTE 2 The Luer connector was originally designed for use at pressures up to 300 kPa.
This document does not specify requirements for the medical devices or accessories that use these
connectors. Such requirements are given in particular documents for specific medical devices or
accessories.
This document does not specify requirements for the following small-bore connectors, which are
specified in other documents:
— haemodialyser, haemodiafilter and haemofilter blood compartment ports (ISO 8637 [5] and
applicable portion of ISO 8638 [6] referencing blood compartment ports);
— haemodialysis, haemodiafiltration and haemofiltration equipment connectors (ISO 8637 [5]);
— infusion system closure piercing connectors (ISO 8536-4 [4]).
NOTE 3 Manufacturers are encouraged to incorporate the small-bore connectors specified in this document into
medical devices or accessories, even if currently not required by the relevant particular medical device documents.
It is expected that when the relevant particular medical device documents are revised, requirements for smallbore
connectors, as specified in ISO 80369, will be included.
NOTE 4 ISO 80369-1:2018, Clause 7, specifies alternative methods of conformance with ISO 80369-1:2018, for
small-bore connectors intended for use with intravascular applications or hypodermic application medical devices
or accessories, which do not conform with this document.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8836:2020(Main)
Suction catheters for use in the respiratory tract (ISO 8836:2019)
EN ISO 8836:2020

This document specifies dimensions and requirements for both open and closed suction catheters made
of flexible materials and intended for use in suctioning of the respiratory tract.
Suction catheters intended for use with flammable anaesthetic gases or agents, lasers or electrosurgical
equipment are not covered by this document.
NOTE For guidance on airway management during laser surgery of the upper airway, see ISO/TR 11991[4].

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day