SIST EN ISO 16961:2015
(Main)Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015)
Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015)
This International Standard specifies the minimum requirements for surface preparation, materials,
application, inspection and testing of internal coating lining systems that are intended to be applied on
internal surfaces of steel storage tanks of crude oil, hydrocarbons and water for corrosion protection.
It covers both new construction and maintenance works of tank internal coating and lining as well as
the repair of defective and deteriorated systems.
This International Standard also provides the minimum requirements for shop performance testing of
the coated/lined samples and the criteria for their approval.
Erdöl-, petrochemische und Erdgasindustrie - Innere Schutzbeschichtungen und Auskleidungen für überirdische Stahltanklager (ISO 16961:2015)
Industries du pétrole, de la pétrochimie et du gaz naturel - Revêtement de protection interne et doublure des réservoirs de stockage hors-sol en acier (ISO 16961:2015)
L'ISO 16961:2015 spécifie les exigences minimales concernant la préparation de surface, les matériaux, l'application, le contrôle et les essais des systèmes de revêtement ou de doublage destinés à être appliqués sur les surfaces internes des réservoirs en acier pour le stockage de pétrole brut, d'hydrocarbures et d'eau dans le but d'assurer leur protection contre la corrosion.
Elle couvre à la fois les nouvelles constructions et les travaux de maintenance pour le revêtement intérieur et le doublage interne des réservoirs ainsi que la réparation de systèmes défectueux et détériorés.
L'ISO 16961:2015 fournit également les exigences minimales pour les essais de performance en atelier des échantillons revêtus/doublés ainsi que les critères d'acceptation.
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Notranji premazi in obloge jeklenih rezervoarjev za shranjevanje (ISO 16961:2015)
Ta mednarodni standard določa minimalne zahteve za pripravo površine, materiale, uporabo, preglede in preskušanje sistemov za notranje premaze, ki so namenjeni nanašanju na obloge jeklenih rezervoarjev za shranjevanje surove nafte, ogljikovodikov in vode, za zaščito pred korozijo.
Zajema nova konstrukcijska in vzdrževalna dela za notranje premaze in obloge jeklenih rezervoarjev kot tudi popravilo okvarjenih in izrabljenih sistemov.
Ta mednarodni standard zagotavlja tudi minimalne zahteve za preskušanje učinkovitosti vzorcev premazov in oblog v proizvodni hali in merila za njihovo odobritev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16961:2015
01-oktober-2015
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
1RWUDQMLSUHPD]LLQREORJHMHNOHQLKUH]HUYRDUMHY]DVKUDQMHYDQMH ,62
Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel
storage tanks (ISO 16961:2015)
Erdöl-, petrochemische und Erdgasindustrie - Innere Schutzbeschichtungen und
Auskleidungen für überirdische Stahltanklager (ISO 16961:2015)
Industries du pétrole, de la pétrochimie et du gaz naturel - Revêtement de protection
interne et doublure des réservoirs de stockage hors-sol en acier (ISO 16961:2015)
Ta slovenski standard je istoveten z: EN ISO 16961:2015
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
SIST EN ISO 16961:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16961:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 16961:2015
EUROPEAN STANDARD
EN ISO 16961
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 75.200
English Version
Petroleum, petrochemical and natural gas industries - Internal
coating and lining of steel storage tanks (ISO 16961:2015)
Industries du pétrole, de la pétrochimie et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie - Innere
Revêtement de protection interne et doublure des Schutzbeschichtungen und Auskleidungen für überirdische
réservoirs de stockage en acier (ISO 16961:2015) Stahltanklager (ISO 16961:2015)
This European Standard was approved by CEN on 20 May 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16961:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16961:2015
EN ISO 16961:2015 (E)
Contents Page
European foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16961:2015
EN ISO 16961:2015 (E)
European foreword
This document (EN ISO 16961:2015) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2016, and conflicting national standards shall be withdrawn
at the latest by February 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, T
...
SLOVENSKI STANDARD
oSIST prEN ISO 16961:2014
01-januar-2014
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
1RWUDQMLSUHPD]LLQREORJHMHNOHQLKUH]HUYRDUMHY]DVKUDQMHYDQMH ,62',6
Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel
storage tanks (ISO/DIS 16961:2013)
Erdöl-, petrochemische und Erdgasindustrie - Innere Schutzbeschichtungen und
Auskleidungen für überirdische Stahltanklager (ISO/DIS 16961:2013)
Industries du pétrole, de la pétrochimie et du gaz naturel - Revêtement de protection
interne et doublure des réservoirs de stockage hors-sol en acier (ISO/DIS 16961:2013)
Ta slovenski standard je istoveten z: prEN ISO 16961
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
oSIST prEN ISO 16961:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 16961:2014
---------------------- Page: 2 ----------------------
oSIST prEN ISO 16961:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16961
ISO/TC 67 Secretariat: NEN
Voting begins on: Voting terminates on:
2013-08-22 2014-01-22
Petroleum, petrochemical and natural gas industries -
Internal coating and lining of steel storage tanks
Industries du pétrole, de la pétrochimie et du gaz naturel - Revêtement de protection interne et doublure
des réservoirs de stockage hors-sol en acier
ICS: 75.200
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16961:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013
---------------------- Page: 3 ----------------------
oSIST prEN ISO 16961:2014
ISO/DIS 16961:2013(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 16961:2014
ISO/DIS 16961
Contents Page
1 Scope . 1
2 Conformance . 1
2.1 Rounding . 1
2.2 Compliance to standard . 1
3 Normative references . 1
4 Terms, definitions and abbreviated terms .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.