SIST EN 60317-57:2010
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 (IEC 60317-57:2010)
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 (IEC 60317-57:2010)
IEC 60317-57:2010 specifies the requirements of an enamelled round copper winding wire of class 220 with a sole coating based on polyamide-imide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. Class 220 is a thermal class that requires a minimum temperature index of 220 and a heat shock temperature of at least 240 °C.
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 57: Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220 (IEC 60317-57:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 57: Fil de section circulaire en cuivre émaillé avec polyamide-imide, classe 220 (CEI 60317-57:2010)
La CEI 60317-57:2010 spécifie les exigences pour les fils de bobinage de section circulaire en cuivre émaillé de classe 220 avec un revêtement unique à base de résine polyamide-imide, qui peut être modifiée à condition qu'elle conserve l'identité chimique de la résine initiale et réponde à toutes les exigences spécifiées du fil. Une classe 220 est une classe thermique qui exige un indice de température minimal de 220 et une température de choc thermique d'au moins 240 °C.
Specifikacije za posebne tipe navitij - 57. del: S poliesterimidom emajliran bakren okrogel vodnik, razred 220 (IEC 60317-57:2010)
Ta del IEC 60317 določa zahteve za emajliran bakren okrogel vodnik razreda 220 z enojnim premazom na osnovi poliesterimidne smole, ki se lahko spremeni pod pogojem, da ohrani kemično identiteto originalne smole in izpolnjuje vse zahteve za vodnik. Razred 220 je toplotni razred, ki zahteva minimalni temperaturni indeks 220 °C in temperaturo toplotnega šoka najmanj 240 °C. Temperatura v stopinjah Celzija, ki ustreza temperaturnemu indeksu, ni nujno ta, pri kateri se priporoča delovanje vodnika, saj je to odvisno od več dejavnikov, vključno s tipi uporabljene opreme. Razpon nominalnih premerov prevodnikov, ki jih zajema ta standard, je naslednji: - Stopnja 1: od 0,071 mm do vključno 1.600 mm; - Stopnja 2: od 0,071 mm do in vključno 1.600 mm. Nominalne premere prevodnikov določa Klavzula 4 IEC 60317-0-1.
General Information
- Status
- Published
- Publication Date
- 14-Nov-2010
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 29-Oct-2010
- Due Date
- 03-Jan-2011
- Completion Date
- 15-Nov-2010
Relations
- Effective Date
- 01-Oct-2024
Overview
SIST EN 60317-57:2010, titled Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220, is a European standard developed by the CLC (European Committee for Electrotechnical Standardization) and based on IEC 60317-57:2010. This standard specifies the technical requirements for enamelled round copper winding wires coated exclusively with a polyamide-imide resin. These wires belong to thermal class 220, characterized by a minimum temperature index of 220 °C and a heat shock endurance of at least 240 °C.
The document covers detailed properties and testing protocols for polyamide-imide enamelled copper wires, ensuring high thermal resistance and mechanical durability demanded in electrical winding applications. It harmonizes specifications to facilitate interoperability and quality assurance for manufacturers and end-users in electrical equipment sectors.
Key Topics
- Thermal Class & Coating: Class 220 wires have a polyamide-imide enamel coating with potential resin modifications, provided the chemical identity remains intact and performance standards are met.
- Thermal Performance: Minimum temperature index of 220 °C and heat shock temperature of at least 240 °C ensure exceptional thermal endurance.
- Dimensions: Nominal conductor diameters range from 0.071 mm up to 1.6 mm for Grade 1 and Grade 2 classifications.
- Mechanical & Electrical Properties: Includes tests for electrical resistance, elongation, springiness, flexibility, and adherence tailored for polyamide-imide enamelled wire.
- Durability Testing: Rigorous testing protocols such as heat shock endurance, abrasion resistance (detailed by conductor diameter), cut-through endurance, and insulation continuity ensure strong mechanical and electrical reliability.
- Specific Tests Not Applicable: Solderability, heat bonding, dielectric dissipation factor, and loss of mass tests are deemed inappropriate for this wire type.
- Packaging Standards: Packaging requirements follow provisions outlined in IEC 60317-0-1 to preserve wire quality during transport and storage.
- Reference to IEC 60317 Series: This standard forms part of a comprehensive IEC 60317 series addressing various winding wire specifications and related test methods.
Applications
- Electrical Windings: Used extensively in electrical machines, transformers, motors, and inductors where high thermal stability and electrical insulation are critical.
- High-Temperature Environments: Suitable for applications requiring winding wire performance at elevated temperatures, including industrial motors, aerospace electrical components, and specialized electrical devices.
- Durable Electrical Components: Ideal for equipment subjected to mechanical abrasion, heat shock, and solvent exposure due to the robust polyamide-imide enamel insulation.
- Compliance with International Norms: Ensures that winding wire products meet stringent international and European quality and safety benchmarks, providing confidence for manufacturers and users.
Related Standards
- IEC 60317-0-1: General requirements for enamelled round copper winding wires, providing foundational test methods and definitions referenced by EN 60317-57.
- IEC 60851: Covers test methods for winding wires, supporting the evaluation procedures cited in this standard.
- IEC 60264: Specifies packaging requirements for winding wires, ensuring proper handling and protection.
- Other Parts of IEC 60317: EN 60317-57 is part of a comprehensive series addressing various enamelled copper wire types with diverse insulation systems and thermal classes.
Keywords: EN 60317-57, polyamide-imide enamelled copper wire, winding wire standard, thermal class 220, electrical winding wire specifications, high-temperature enamel wire, copper winding wire, electrical insulation wire, IEC 60317 standards, abrasion resistance winding wire.
Frequently Asked Questions
SIST EN 60317-57:2010 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 (IEC 60317-57:2010)". This standard covers: IEC 60317-57:2010 specifies the requirements of an enamelled round copper winding wire of class 220 with a sole coating based on polyamide-imide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. Class 220 is a thermal class that requires a minimum temperature index of 220 and a heat shock temperature of at least 240 °C.
IEC 60317-57:2010 specifies the requirements of an enamelled round copper winding wire of class 220 with a sole coating based on polyamide-imide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. Class 220 is a thermal class that requires a minimum temperature index of 220 and a heat shock temperature of at least 240 °C.
SIST EN 60317-57:2010 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires; 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60317-57:2010 has the following relationships with other standards: It is inter standard links to SIST EN 60317-57:2010/A1:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 60317-57:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
Specifikacije za posebne tipe navitij - 57. del: S poliesterimidom emajliran bakren
okrogel vodnik, razred 220 (IEC 60317-57:2010)
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled
round copper wire, class 220 (IEC 60317-57:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 57:
Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220 (IEC 60317-57:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 57: Fil de section
circulaire en cuivre émaillé avec polyamide-imide, classe 220 (CEI 60317-57:2010)
Ta slovenski standard je istoveten z: EN 60317-57:2010
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60317-57
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 57: Polyamide-imide enamelled round copper wire, class 220
(IEC 60317-57:2010)
Spécifications pour types particuliers de Technische Lieferbedingungen für
fils de bobinage - bestimmte Typen von Wickeldrähten -
Partie 57: Fil de section circulaire en Teil 57: Runddrähte aus Kupfer,
cuivre émaillé avec polyamide-imide, lackisoliert mit Polyamidimid, Klasse 220
classe 220 (IEC 60317-57:2010)
(CEI 60317-57:2010)
This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-57:2010 E
Foreword
The text of document 55/1137/CDV, future edition 1 of IEC 60317-57, prepared by IEC TC 55, Winding
wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60317-57 on 2010-10-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60317-57:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60317-57:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60317-0-1 2008 Specifications for particular types of winding EN 60317-0-1 2008
wires -
Part 0-1: General requirements - Enamelled
round copper wire
60317-57 ®
Edition 1.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 57: Polyamide-imide enamelled round copper wire, class 220
Spécifications pour types particuliers de fils de bobinage –
Partie 57: Fil de section circulaire en cuivre émaillé avec polyamide-imide,
classe 220
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
J
CODE PRIX
ICS 29.60.10 ISBN 978-2-88912-142-7
– 2 – 60317-57 © IEC:2010
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Definitions, general notes on methods of test and appearance .6
3.1 Definitions and general notes on methods of test .6
3.2 Appearance.6
4 Dimensions .6
5 Electrical resistance .7
6 Elongation .7
7 Springiness .7
8 Flexibility and adherence.7
9 Heat shock .7
10 Cut-through .7
11 Resistance to abrasion .7
12 Resistance to solvents.8
13 Breakdown voltage .8
14 Continuity of insulation .8
15 Temperature index .8
16 Resistance to refrigerants.8
17 Solderability .8
18 Heat bonding.9
19 Dielectric dissipation factor.9
20 Resistance to transformer oil .9
21 Loss of mass .9
22 High temperature failure .9
23 Pin hole test .9
30 Packaging .9
Table 1 – Resistance to abrasion.8
...
SLOVENSKI STANDARD
01-december-2010
Specifikacije za posebne tipe navitij - 57. del: S poliesterimidom emajliran bakren
okrogel vodnik, razred 220 (IEC 60317-57:2010)
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled
round copper wire, class 220 (IEC 60317-57:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 57:
Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220 (IEC 60317-57:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 57: Fil de section
circulaire en cuivre émaillé avec polyamide-imide, classe 220 (CEI 60317-57:2010)
Ta slovenski standard je istoveten z: EN 60317-57:2010
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60317-57
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 57: Polyamide-imide enamelled round copper wire, class 220
(IEC 60317-57:2010)
Spécifications pour types particuliers de Technische Lieferbedingungen für
fils de bobinage - bestimmte Typen von Wickeldrähten -
Partie 57: Fil de section circulaire en Teil 57: Runddrähte aus Kupfer,
cuivre émaillé avec polyamide-imide, lackisoliert mit Polyamidimid, Klasse 220
classe 220 (IEC 60317-57:2010)
(CEI 60317-57:2010)
This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-57:2010 E
Foreword
The text of document 55/1137/CDV, future edition 1 of IEC 60317-57, prepared by IEC TC 55, Winding
wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60317-57 on 2010-10-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60317-57:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60317-57:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60317-0-1 2008 Specifications for particular types of winding EN 60317-0-1 2008
wires -
Part 0-1: General requirements - Enamelled
round copper wire
60317-57 ®
Edition 1.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 57: Polyamide-imide enamelled round copper wire, class 220
Spécifications pour types particuliers de fils de bobinage –
Partie 57: Fil de section circulaire en cuivre émaillé avec polyamide-imide,
classe 220
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
J
CODE PRIX
ICS 29.60.10 ISBN 978-2-88912-142-7
– 2 – 60317-57 © IEC:2010
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Definitions, general notes on methods of test and appearance .6
3.1 Definitions and general notes on methods of test .6
3.2 Appearance.6
4 Dimensions .6
5 Electrical resistance .7
6 Elongation .7
7 Springiness .7
8 Flexibility and adherence.7
9 Heat shock .7
10 Cut-through .7
11 Resistance to abrasion .7
12 Resistance to solvents.8
13 Breakdown voltage .8
14 Continuity of insulation .8
15 Temperature index .8
16 Resistance to refrigerants.8
17 Solderability .8
18 Heat bonding.9
19 Dielectric dissipation factor.9
20 Resistance to transformer oil .9
21 Loss of mass .9
22 High temperature failure .9
23 Pin hole test .9
30 Packaging .9
Table 1 – Resistance to abrasion.8
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...