SIST EN 60811-302:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
IEC 60811-302:2012 gives the procedure to examine the d.c. resistivity at 23 °C and 100 °C which typically applies to filling compounds used for communication cables and optical fibre cables. IEC 60811-302:2012 cancels and replaces Clause 10 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 302: Elektrische Prüfungen - Messung des Gleichstromwiderstands von Füllmassen bei 23 °C und bei 100 °C
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 302: Essais électriques - Mesure de la résistivité en courant continu à 23 °C et 100 °C des matières de remplissage
La CEI 60811-302:2012 donne la méthode pour examiner la résistivité en courant continu à 23 °C et 100 °C, qui s'applique généralement aux matières de remplissage utilisées pour les câbles de communication et à fibres optiques. La CEI 60811-302:2012 annule et remplace l'Article 10 de la CEI 60811-5-1:1990, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012. Cette publication doit être lue conjointement avec la CEI 60811-100:2012.
Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 302. del: Električni preskusi - Meritve enosmerne upornosti polnilnih zmesi pri 23 °C in 100 °C
302. del standarda IEC 60811 navaja postopek za določitev enosmerne upornosti pri 23 °C in 100 °C, ki se običajno uporablja za polnilne zmesi za komunikacijske kable in kable z optičnimi vlakni.
General Information
- Status
- Published
- Publication Date
- 04-Jul-2012
- Technical Committee
- IEKA - Electric cables
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 12-Jun-2012
- Due Date
- 17-Aug-2012
- Completion Date
- 05-Jul-2012
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 29-Jan-2023
- Effective Date
- 07-Jun-2022
- Effective Date
- 07-Jun-2022
- Effective Date
- 23-Jul-2014
- Effective Date
- 23-Jul-2014
Overview
EN 60811-302:2012 (adoption of IEC 60811-302:2012) specifies the electrical test method for measuring the d.c. resistivity of filling compounds used in communication and optical fibre cables. It defines how to determine resistivity at two temperatures - 23 °C and 100 °C - and is intended to be read in conjunction with EN/IEC 60811-100 (general provisions for non‑metallic cable material tests). This part replaces Clause 10 of the withdrawn IEC 60811-5-1:1990 and references the test procedure in IEC 60247.
Key Topics
- Scope: Measurement of d.c. resistivity of filling compounds typically used in cable bedding and filling for communication and optical fibre applications.
- Referenced methods: Test procedure, calculation and measurement details are carried out in accordance with IEC 60247.
- Apparatus: Use of a three‑terminal cell as described by IEC 60247.
- Sample preparation: Filling compound must be heated to its clarify point and poured into a preheated cell; care must be taken to avoid air bubbles.
- Ageing: Any required ageing procedures follow IEC 60247.
- Test conditions:
- Temperatures: (23 ± 2) °C and (100 ± 3) °C
- D.C. test voltage: 100 V
- Results and reporting: Calculation and expression of resistivity follow IEC 60247; the test report is prepared in accordance with IEC 60811-100.
Applications
This standard is practical for:
- Cable manufacturers evaluating filling compounds for new cable designs.
- Material suppliers validating electrical insulation properties of oils, gels and other filling substances.
- Independent test laboratories conducting type-approval, routine QC or comparative testing.
- R&D and product development teams selecting filling compounds to ensure signal integrity and long-term performance.
- Compliance and certification engineers documenting conformity with cable material requirements.
Use cases include material selection, quality control, batch acceptance testing, failure analysis and supporting regulatory/compliance dossiers for optical fibre and communication cable products.
Related standards
- IEC 60247 - Insulating liquids: measurement procedures (permits correct implementation of the d.c. resistivity test)
- IEC/EN 60811-100 - General test rules for non‑metallic cable materials (reporting and general requirements)
- IEC 60811 series - broader set of test methods for cable non‑metallic materials
- Note: EN 60811-302:2012 is the CENELEC/CLC adoption of IEC 60811-302:2012.
Keywords: EN 60811-302:2012, d.c. resistivity, filling compounds, optical fibre cables, communication cables, IEC 60247, three‑terminal cell, cable materials testing.
Frequently Asked Questions
SIST EN 60811-302:2012 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds". This standard covers: IEC 60811-302:2012 gives the procedure to examine the d.c. resistivity at 23 °C and 100 °C which typically applies to filling compounds used for communication cables and optical fibre cables. IEC 60811-302:2012 cancels and replaces Clause 10 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with <a href='http://webstore.iec.ch/webstore/webstore.nsf/ArtNum_PK/46164'>IEC 60811-100:2012</a>.
IEC 60811-302:2012 gives the procedure to examine the d.c. resistivity at 23 °C and 100 °C which typically applies to filling compounds used for communication cables and optical fibre cables. IEC 60811-302:2012 cancels and replaces Clause 10 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with <a href='http://webstore.iec.ch/webstore/webstore.nsf/ArtNum_PK/46164'>IEC 60811-100:2012</a>.
SIST EN 60811-302:2012 is classified under the following ICS (International Classification for Standards) categories: 29.035.01 - Insulating materials in general; 29.060.20 - Cables. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60811-302:2012 has the following relationships with other standards: It is inter standard links to SIST EN 60811-5-1:2000/A1:2004, SIST EN 60811-5-1:2000, SIST EN 60811-5-1:2000, SIST EN 60811-5-1:2000/A1:2004, SIST EN 60811-5-1:2000, SIST EN 60811-5-1:2000/A1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60811-302:2012 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 60811-302:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO (OHNWULþQLSUHVNXVL0HULWYHHQRVPHUQHXSRUQRVWLSROQLOQLK]PHVLSULƒ&LQ
ƒ&
Electric and optical fibre cables - Test methods for non-metallic materials - Part 302:
Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling
compounds
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 302: Elektrische Prüfungen - Messung des Gleichstromwiderstands von
Füllmassen bei 23 °C und bei 100 °C
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 302: Essais électriques - Mesure de la résistivité en courant continu
à 23 °C et 100 °C des matières de remplissage
Ta slovenski standard je istoveten z: EN 60811-302:2012
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60811-302
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 29.035.01; 29.060.20 Supersedes EN 60811-5-1:1999 (partially) + A1:2004 (partially)
English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 302: Electrical tests -
Measurement of the d.c. resistivity at 23 °C and 100 °C of filling
compounds
(IEC 60811-302:2012)
Câbles électriques et à fibres optiques - Kabel, isolierte Leitungen und
Méthodes d'essai pour les matériaux non- Glasfaserkabel -
métalliques - Prüfverfahren für nichtmetallene
Partie 302: Essais électriques - Werkstoffe -
Mesure de la résistivité en courant continu Teil 302: Elektrische Prüfungen -
à 23 °C et 100 °C des matières de Messung des Gleichstromwiderstands von
remplissage Füllmassen bei 23 °C und bei 100 °C
(CEI 60811-302:2012) (IEC 60811-302:2012)
This European Standard was approved by CENELEC on 2012-04-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-302:2012 E
Foreword
The text of document 20/1284/FDIS, future edition 1 of IEC 60811-302, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2013-01-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-04-16
standards conflicting with the
document have to be withdrawn
This document supersedes Clause 10 of EN 60811-5-1:1999 + A1:2004 (partially). Full details of the
replacements are shown in Annex A of EN 60811-100:2012.
There are no technical changes with respect to EN 60811-5-1:1999 + A1:2004, but see the Foreword to
EN 60811-100:2012.
This standard is to be read in conjunction with EN 60811-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC)
Endorsement notice
The text of the International Standard IEC 60811-302:2012 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 60811-302:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60247 - Insulating liquids - Measurement of relative EN 60247 -
permittivity, dielectric dissipation factor (tan δ)
and d.c. resistivity
IEC 60811-100 2012 Electric and optical fibre cables - Test EN 60811-100 2012
methods for non-metallic materials -
Part 100: General
IEC 60811-302 ®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –
Part 302: Electrical tests – Measurement of the d.c. resistivity at 23 °C and
100 °C of filling compounds
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux
non-métalliques –
Partie 302: Essais électriques – Mesure de la résistivité en courant continu à
23 °C et 100 °C des matières de remplissage
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 29.035.01; 29.060.20 ISBN 978-2-88912-960-7
– 2 – 60811-302 IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test method . 6
4.1 General . 6
4.2 Apparatus . 6
4.3 Sample and test piece preparation . 6
4.4 Ageing procedure . 6
4.5 Measurements . 7
4.6 Expression of the results .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...