SIST EN ISO 7965-1:2024
(Main)Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024)
Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024)
This document specifies a method of vertical impact testing on a filled paper sack by dropping. It is performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard.
This document specifies the testing procedure and how the results of tests are presented. It is based on ISO 2248 but is specifically related to paper sacks.
Packmittel - Stoßprüfung im freien Fall für Säcke - Teil 1: Papiersäcke (ISO 7965-1:2024)
Dieses Dokument legt ein Verfahren zur vertikalen Stoßprüfung im freien Fall an befüllten Papiersäcken fest. Diese Prüfung wird entweder als Einzelprüfung durchgeführt, um die Einflüsse eines vertikalen Stoßes nach freiem Fall zu untersuchen, oder als Teil einer Prüffolge zur Ermittlung der Widerstandsfähigkeit eines Sacks im Rahmen eines Verteilungssystems, das eine vertikale Stoßbeanspruchung einschließt.
Dieses Dokument legt das Prüfverfahren fest und wie die Prüfergebnisse dargestellt werden. Seine Grundlage ist ISO 2248, jedoch besonders auf Papiersäcke bezogen.
Emballages - Essai de chute - Partie 1: Sacs en papier (ISO 7965-1:2024)
Le présent document spécifie une méthode d’essai de résistance au choc vertical de sacs en papier pleins lâchés en chute libre. Il s’agit d’essai isolé destiné à étudier les effets du choc vertical ou qui fait partie d’une série d’essais destinés à mesurer la capacité d’un sac à résister aux conditions d’un système de distribution comprenant un risque de choc vertical.
Le présent document spécifie le mode opératoire d’essai et la façon dont les résultats des essais sont présentés. Il est basé sur l’ISO 2248, mais a spécifiquement trait aux sacs en papier.
Embalaža - Preskus s prostim padom - 1. del: Papirnate vreče (ISO 7965-1:2024)
Ta dokument določa metodo za preskušanje napolnjene papirnate vreče ob navpičnem udarcu s prostim padom. Izvaja se kot samostojni preskus za raziskovanje učinkov navpičnega udarca ali kot del zaporednih preskusov za merjenje zmožnosti vreče glede prenašanja distribucijskega sistema, ki vključuje nevarnost navpičnega udarca.
Ta dokument določa preskusni postopek in način predstavitve rezultatov preskusov. Temelji na standardu ISO 2248, vendar se posebej navezuje na papirnate vreče.
General Information
- Status
- Published
- Public Enquiry End Date
- 24-Jul-2023
- Publication Date
- 13-Jun-2024
- Technical Committee
- EPO - Packaging - sales and grouped
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 14-May-2024
- Due Date
- 19-Jul-2024
- Completion Date
- 14-Jun-2024
Relations
- Replaces
SIST EN 27965-1:1997 - Packaging - Sacks - Drop test - Part 1: Paper sacks (ISO 7965-1:1984) - Effective Date
- 01-Jul-2024
Overview - EN ISO 7965-1:2024 (Packaging - Drop test - Part 1: Paper sacks)
EN ISO 7965-1:2024 / ISO 7965-1:2024 specifies a method for vertical impact testing of filled paper sacks by dropping. The standard is intended to assess how a paper sack responds to a vertical impact - either as a single investigation or as part of a sequence that simulates a distribution system including vertical impact hazards. It defines the test principle, required apparatus, sampling/conditioning, test procedures, methods for presenting results, and the content of the test report.
Key topics and technical requirements
- Scope: Tests apply specifically to filled paper sacks to evaluate resistance to vertical impacts during distribution.
- Principle: A filled sack is released from a predetermined height to strike a rigid, horizontal impact surface; drop height and package orientation are set in advance.
- Apparatus essentials (Clause 5):
- Means to set and ensure correct drop height
- Lifting arrangement that does not damage the sack
- Platform and release mechanism ensuring unobstructed fall
- Impact surface: horizontal, flat and rigid
- Sampling and conditioning:
- Sampling for average quality follows ISO 7023
- Paper sacks are conditioned for testing as described in ISO 6599-1 due to paper’s hygroscopic nature (Clause 7)
- Test procedures (Clause 8–9):
- Filling and placement rules before dropping
- Methods include progressive drop height and constant drop height
- Tests may be performed as flat or butt impacts (side constant-height test excluded for constant method)
- Reporting of sack breakage and other outcomes
- Test report: Clause 10 lists required information to present results consistently.
Applications and who uses this standard
- Packaging designers and material engineers validating paper sack strength and design.
- Quality control and testing laboratories conducting routine drop testing and supplier acceptance tests.
- Logistics, warehousing and distribution planners simulating handling impacts in supply chains.
- Manufacturers and purchasers specifying performance criteria for sacks in supplier contracts.
- Regulatory and compliance teams ensuring packaging meets recognized test methods.
Related standards
- ISO 2248 (basis for the method)
- ISO 6590-1 (sacks vocabulary and types)
- ISO 6599-1 (conditioning for testing - paper sacks)
- ISO 7023 (sampling empty sacks)
This standard helps ensure consistent, repeatable drop test results for paper sacks, supporting risk reduction in handling and distribution and enabling clear technical specifications for packaging performance.
Frequently Asked Questions
SIST EN ISO 7965-1:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024)". This standard covers: This document specifies a method of vertical impact testing on a filled paper sack by dropping. It is performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard. This document specifies the testing procedure and how the results of tests are presented. It is based on ISO 2248 but is specifically related to paper sacks.
This document specifies a method of vertical impact testing on a filled paper sack by dropping. It is performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard. This document specifies the testing procedure and how the results of tests are presented. It is based on ISO 2248 but is specifically related to paper sacks.
SIST EN ISO 7965-1:2024 is classified under the following ICS (International Classification for Standards) categories: 55.080 - Sacks. Bags. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 7965-1:2024 has the following relationships with other standards: It is inter standard links to SIST EN 27965-1:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 7965-1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Nadomešča:
SIST EN 27965-1:1997
Embalaža - Preskus s prostim padom - 1. del: Papirnate vreče (ISO 7965-1:2024)
Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024)
Packmittel - Stoßprüfung im freien Fall für Säcke - Teil 1: Papiersäcke (ISO 7965-
1:2024)
Emballages - Essai de chute - Partie 1: Sacs en papier (ISO 7965-1:2024)
Ta slovenski standard je istoveten z: EN ISO 7965-1:2024
ICS:
55.080 Vreče. Vrečke Sacks. Bags
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 7965-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 55.080 Supersedes EN 27965-1:1992
English Version
Packaging - Drop test - Part 1: Paper sacks (ISO 7965-
1:2024)
Emballages - Essai de chute - Partie 1: Sacs en papier Packmittel - Stoßprüfung im freien Fall für Säcke - Teil
(ISO 7965-1:2024) 1: Papiersäcke (ISO 7965-1:2024)
This European Standard was approved by CEN on 29 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7965-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 7965-1:2024) has been prepared by Technical Committee ISO/TC 122
"Packaging" in collaboration with Technical Committee CEN/TC 261 “Packaging” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 27965-1:1992.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7965-1:2024 has been approved by CEN as EN ISO 7965-1:2024 without any
modification.
International
Standard
ISO 7965-1
Second edition
Packaging — Drop test —
2024-04
Part 1:
Paper sacks
Emballages — Essai de chute —
Partie 1: Sacs en papier
Reference number
ISO 7965-1:2024(en) © ISO 2024
ISO 7965-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 7965-1:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 2
7 Test conditions . 2
7.1 General .2
7.2 Conditioning for testing of paper sacks .2
7.3 Testing in non-laboratory situations .2
7.4 Surface conditions .2
8 Procedure . 3
8.1 General .3
8.2 Filling .3
8.3 Dropping.3
8.3.1 General .3
8.3.2 Dropping procedure .3
8.4 Sack breakage .4
9 Test methods . 4
9.1 General .4
9.2 Progressive drop height method .4
9.2.1 General .4
9.2.2 Flat progressive height drop test .4
9.2.3 Butt progressive height drop test .5
9.3 Constant drop height method .5
9.3.1 General .5
9.3.2 Flat constant height drop test .5
9.3.3 Butt constant height drop test .5
10 Test report . 6
Annex A (informative) Example of apparatus for drop testing . 7
Annex B (informative) Identification of surfaces of filled sacks for testing . 8
Bibliography . 9
iii
ISO 7965-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 122, Packaging, Subcommittee SC 3,
Performance requirements and tests for means of packaging, packages and unit loads (as required by
ISO/TC 122), in collaboration with the European Committee for Standardization (CEN) Technical Committee
CEN/TC 261, Packaging, in accordance with the Agreement on technical cooperation between ISO and CEN
...
The SIST EN ISO 7965-1:2024 standard delivers a comprehensive methodology for assessing the durability of filled paper sacks through vertical impact testing. The document aims to identify the resilience of paper sacks when subjected to drop tests, simulating conditions that mimic real-world distribution systems that may include hazardous vertical impacts. One of the significant strengths of this standard is its well-defined scope, which not only clarifies the testing procedure but also aligns closely with industry needs for ensuring product integrity during transport. This specification recognizes and addresses the importance of performance under specific conditions, offering businesses a reliable framework for evaluating product packaging. Additionally, the explicit focus on paper sacks sets this standard apart, ensuring that the unique properties and handling of this packaging material are taken into account during testing. By also referencing ISO 2248, the standard builds upon established international practices while tailoring the guidelines specifically for paper sacks, enhancing its relevance and applicability within the industry. Ultimately, the SIST EN ISO 7965-1:2024 standard empowers manufacturers and distributors to assess and improve the performance of their packaging solutions, thus contributing to higher standards of safety and reliability in product distribution. The comprehensive nature of the testing procedure outlined in this document ensures that stakeholders are equipped with the necessary knowledge to maintain quality control and optimize packaging design for resilience during the delivery process.
SIST EN ISO 7965-1:2024に関するレビューは、包装業界における紙袋の耐衝撃性を評価するための重要な標準を提示しています。この文書は、充填された紙袋に対する縦方向の衝撃試験方法を規定しており、個別の試験として、または縦方向の衝撃ハザードを含む流通システムに対する袋の耐久性を測定するための一連の試験の一部として実施されます。 この標準の強みは、その明確な試験手順と試験結果の提示方法にあります。国際的に認められているISO 2248に基づいており、特に紙袋に関連する試験仕様は、業界での提供物の信頼性を向上させる要素となっています。また、この標準は、製造業者が自社製品の品質管理を実施する際に活用できる実用的な枠組みを提供しており、業界全体の基準を引き上げることに寄与しています。 さらに、この文書は包装資材の安全性と耐久性を確保するうえで不可欠であり、流通過程における紙袋のパフォーマンスを評価するための基準として、企業や研究機関、規制当局にとって非常に関連性があります。SIST EN ISO 7965-1:2024は、紙袋の要件と試験に関する体系的なアプローチを定義することで、包装産業における技術的な信頼性をさらに高める助けとなるでしょう。
SIST EN ISO 7965-1:2024 표준 문서는 종이 자루의 수직 충격 테스트를 위한 방법을 규명하며, 이는 포장재의 안전성과 내구성을 평가하는 데 핵심적인 역할을 합니다. 이 표준은 충격을 조사하기 위해 단일 테스트로 수행할 수 있으며, 또한 유통 시스템 내에서 수직 충격 위험을 견딜 수 있는 능력을 측정하기 위한 일련의 테스트 중 하나로 실시될 수 있습니다. 이 표준의 강점은 포장된 물체가 실제 유통 과정에서 경험할 수 있는 다양한 충격에 대한 저항력을 평가할 수 있는 구조적인 테스트 절차를 제시한다는 점입니다. 이를 통해 제조업체는 자루의 설계와 재료를 개선하고, 최종 소비자에게 안전하고 신뢰할 수 있는 제품을 제공할 수 있습니다. 또한 SIST EN ISO 7965-1:2024 표준은 테스트 결과를 어떻게 제시할지를 명확히 규정하고 있어, 품질 보증을 위한 참고 자료로서의 가치가 큽니다. ISO 2248을 기반으로 하지만, 특히 종이 자루에 맞춤화되어 있어 더욱 관련성이 높습니다. 이는 종이 자루에 대한 구체적인 테스트 절차와 기대되는 성능에 대한 기준을 제공하여, 산업 전반에서 그룹간 호환성과 신뢰성을 높이는 데 기여합니다. 결론적으로, SIST EN ISO 7965-1:2024는 포장 산업에서 종이 자루의 충격 저항 능력을 체계적으로 평가할 수 있는 중요한 표준으로, 실질적인 적용 가능성과 유용성을 갖추고 있습니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...