SIST EN IEC 61362:2024
(Main)Guidelines to specification of hydraulic turbine governing systems (IEC 61362:2024)
Guidelines to specification of hydraulic turbine governing systems (IEC 61362:2024)
IEC 61362:2024 includes relevant technical data necessary to describe hydraulic turbine governing systems and to define their performance. It is aimed at unifying and thus facilitating the selection of relevant parameters in bidding specifications and technical bids. It will also serve as a basis for setting up technical guarantees. The scope of this standard is restricted to the turbine governing level. Additionally some remarks about the control loops of the plant level and about primary and secondary frequency control (see also Annex B) are made for better understanding without making a claim to be complete. Important topics covered are:
- speed, power, water level, opening and flow (discharge) control for reaction and impulse-type turbines including double regulated machines;
- means of providing actuating energy;
- safety devices for emergency shutdown.
To facilitate the setting up of specifications, this guide also includes data sheets, which are to be filled out by the customer and the supplier in the various stages of the project and the contract. Acceptance tests, specific test procedures and guarantees are outside the scope of the guide; those topics are covered by IEC 60308. This third edition cancels and replaces the second edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition: adoption of parts of IEC 60308:2005 which deal with specification matters; introduction of several new technical topics; and overall editorial revision.
Keywords: Hydraulic turbine, Hydraulic turbine governing systems.
Leitfaden zur Spezifikation der Regeleinrichtung von Wasserturbinen (IEC 61362:2024)
Lignes directrices pour la spécification des systèmes de régulation des turbines hydrauliques (IEC 61362:2024)
La IEC 61362:2024 contient les données techniques nécessaires pour décrire les systèmes de régulation des turbines hydrauliques et définir leurs performances. Elle a pour but d'unifier et ainsi de faciliter les spécifications des appels d'offres et les offres techniques. Elle servira également de base pour fixer les garanties techniques. Le domaine d'application de la présente norme est limité au niveau du régulateur turbine. En outre, des remarques sur les boucles de contrôle au niveau de la centrale ainsi que sur le réglage de fréquence primaire et secondaire (voir aussi l'Annexe B) apportent une meilleure compréhension sans avoir la prétention d'être exhaustives. Le guide traite les fonctions importantes suivantes:
- les régulations de vitesse, puissance, niveau d'eau, ouverture et débit (décharge) des turbines à réaction et des turbines à action, y compris les machines à double régulation;
- les moyens de production de l'énergie de manoeuvre;
- les dispositifs de sécurité pour l'arrêt d'urgence, etc.
Pour faciliter la rédaction des spécifications, ce guide inclut des formulaires de données à remplir par le client et par le fournisseur aux différentes étapes du projet et du contrat. Les essais de réception, les procédures d´essais spécifiques et les garanties ne sont pas traités par le guide mais par la CEI 60308. Cette troisième édition annule et remplace la seconde édition parue en 2012.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: prise en compte des paragraphes de la deuxième édition de l’IEC 60308 parue en 2005 qui traitent des questions de spécification; présentation de plusieurs nouveaux sujets techniques; et révision rédactionnelle complète.
Mots clé: turbines hydrauliques, systèmes de régulation des turbines hydrauliques.
Smernice za specifikacijo sistemov za krmiljenje hidravličnih turbin (IEC 61362:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Smernice za specifikacijo sistemov za krmiljenje hidravličnih turbin (IEC
61362:2024)
Guidelines to specification of hydraulic turbine governing systems (IEC 61362:2024)
Leitfaden zur Spezifikation der Regeleinrichtung von Wasserturbinen (IEC 61362:2024)
Lignes directrices pour la spécification des systèmes de régulation des turbines
hydrauliques (IEC 61362:2024)
Ta slovenski standard je istoveten z: EN IEC 61362:2024
ICS:
27.140 Vodna energija Hydraulic energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61362
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2024
ICS 27.140 Supersedes EN 61362:2012
English Version
Guidelines to specification of hydraulic turbine governing
systems
(IEC 61362:2024)
Lignes directrices pour la spécification des systèmes de Leitfaden zur Spezifikation der Regeleinrichtung von
régulation des turbines hydrauliques Wasserturbinen
(IEC 61362:2024) (IEC 61362:2024)
This European Standard was approved by CENELEC on 2024-10-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61362:2024 E
European foreword
The text of document 4/500/FDIS, future edition 3 of IEC 61362, prepared by TC 4 "Hydraulic turbines"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-10-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-10-31
document have to be withdrawn
This document supersedes EN 61362:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61362:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60193 NOTE Approved as EN IEC 60193
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60308 - Hydraulic turbines - Testing of governing EN IEC 60308 -
systems
IEC 61131-2 - Industrial-process measurement and EN 61131-2 -
control - Programmable controllers - Part 2:
Equipment requirements and tests
IEC 61362 ®
Edition 3.0 2024-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Guidelines to specification of hydraulic turbine governing systems
Lignes directrices pour la spécification des systèmes de régulation des turbines
hydrauliques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.140 ISBN 978-2-8322-9577-9
– 2 – IEC 61362:2024 © IEC 2024
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 10
3.1 General terms and definitions . 11
3.2 Terms and definitions related to control levels, control modes and
operational modes . 11
3.3 Terms and definitions from control theory . 12
3.4 Subscripts and prefixes . 13
3.5 Terms and definitions related to the plant and the units . 13
3.6 Terms and definitions related to the governing system . 16
4 Governing system structure . 23
4.1 General . 23
4.2 Main control functions . 24
4.2.1 General . 24
4.2.2 Speed control . 24
4.2.3 Power output control . 24
4.2.4 Opening control . 24
4.2.5 Water level control . 25
4.2.6 Flow control . 25
4.3 Configurations of combined controllers . 25
4.3.1 General . 25
4.3.2 Parallel structure . 25
4.3.3 Series structures . 26
4.4 Special control functions . 26
4.4.1 Feed forward control . 26
4.4.2 Surge tank level or pressure feedback . 27
4.5 Pump-turbine control . 28
4.5.1 General . 28
4.5.2 Conventional pump-turbine control . 28
4.5.3 Variable speed pump-turbine control . 28
4.6 Manual control . 30
4.7 Linearization . 30
4.8 Limitation functions . 30
4.9 Bumpless control modes transition . 31
4.10 Optimization control . 31
5 Functional performance . 31
5.1 General . 31
5.2 Modelling and digital simulation . 32
5.2.1 General . 32
5.2.2 Water passages . 33
5.2.3 Turbine, generator, electrical grid . 33
5.2.4 Control concept . 33
5.2.5 Hardware-in-the-loop simulation . 34
5.2.6 Personnel training . 34
5.2.7 Inaccuracy of plant simulators . 34
IEC 61362:2024 © IEC 2024 – 3 –
5.3 Characteristic parameters for PID-controllers . 35
5.3.1 General . 35
5.3.2 Permanent droop . 35
5.3.3 Proportional action coefficient K , integral action time T , and derivative
P I
action time T . 35
D
5.3.4 Tuning of turbine governing systems . 36
5.4 Other parameters of the governing systems . 37
5.4.1 Command signal adjustments for controlled variables (speed, power
output, etc.) and load limiter . 37
5.4.2 Governor insensitivity i /2 . 37
x
5.4.3 Dynamic characteristics of servo-positioner . 37
5.4.4 Parameters of servo-positioner . 39
5.4.5 Servo-positioner non-linearity by kinematics . 40
6 Servo positioner configurations . 40
6.1 Servo-positioners . 40
6.2 Configurations of servo-positioners . 41
6.3 Multiple actuator control . 41
6.3.1 General . 41
6.3.2 Parallel structure . 42
6.3.3 Series structure . 42
6.3.4 Individual control . 42
6.4 Dual regulation of turbines with controllable guide vane and runner blade
angles . 43
6.5 Dual control of turbines with needles and deflectors . 43
6.6 Other relationships . 43
7 Instrumentation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.