SIST EN 60335-2-54:2009

SLOVENSKI STANDARD
01-marec-2009
1DGRPHãþD
SIST EN 60335-2-54:2003
SIST EN 60335-2-54:2003/A1:2004
SIST EN 60335-2-54:2003/A11:2006
SIST EN 60335-2-54:2003/A2:2007
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO3RVHEQH]DKWHYH
]DDSDUDWH]DþLãþHQMHSRYUãLQVWHNRþLQDPLDOLSDUR,(&
Household and similar electrical appliances - Safety -- Part 2-54: Particular requirements
for surface-cleaning appliances for household use employing liquids or steam
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-54:
Besondere Anforderungen für Geräte zur Oberflächenreinigung mit Flüssigkeiten oder
Dampf
Appareils électrodomestiques et analogues - Sécurité -- Partie 2-54: Règles particulières
pour les appareils de nettoyage des surfaces à usage domestique, utilisant des liquides
ou de la vapeur
Ta slovenski standard je istoveten z: EN 60335-2-54:2008
ICS:
13.120 Varnost na domu Domestic safety
97.080 Aparati za nego tal Floor treatment appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60335-2-54
NORME EUROPÉENNE
November 2008
EUROPÄISCHE NORM
ICS 13.120; 97.180 Supersedes EN 60335-2-54:2003 + A1:2004 + A11:2006 + A2:2007

English version
Household and similar electrical appliances -
Safety -
Part 2-54: Particular requirements for surface-cleaning appliances
for household use employing liquids or steam
(IEC 60335-2-54:2008)
Appareils électrodomestiques  Sicherheit elektrischer Geräte
et analogues - für den Hausgebrauch
Sécurité - und ähnliche Zwecke -
Partie 2-54: Règles particulières Teil 2-54: Besondere Anforderungen
pour les appareils de nettoyage für Geräte zur Oberflächenreinigung
des surfaces à usage domestique, mit Flüssigkeiten oder Dampf
utilisant des liquides ou de la vapeur (IEC 60335-2-54:2008)
(CEI 60335-2-54:2008)
This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60335-2-54:2008 E
Foreword
The text of document 61/3676/FDIS, future edition 4 of IEC 60335-2-54, prepared by IEC Technical
Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 60335-2-54 on 2008-10-01.
This European Standard supersedes EN 60335-2-54:2003 + A1:2004 + A11:2006 + A2:2007.
The following dates are applicable:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-07-01
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances –
Safety – Part 1: General requirements. It was established on the basis of the 2002 edition of that
standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when
such changes become applicable will be stated in the relevant amendment of revision of Part 1.
This part 2 supplements or modifies the corresponding clauses in EN 60335-1, so as to convert it into the
European Standard: Safety requirements for electric surface-cleaning appliances employing liquids or
steam.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement", the relevant text in
Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
– subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun
are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in Annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in Annex ZB to
EN 60335-1.
p NOTE  In this document, p is used in the margin to indicate instructions for preparing the printed version.
__________
- 3 - EN 60335-2-54:2008
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that
the risks are mainly of electrical origin and consequently this directive is not applicable. However, the
relevant essential safety requirements of the Machinery Directive are covered by this standard together
with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-54:2008 was approved by CENELEC as a European
Standard without any modification.
__________
Bibliography
p Add the following notes to the standards mentioned:
IEC 60335-2-10 NOTE  Harmonized as EN 60335-2-10:2003 (not modified).
IEC 60335-2-79 NOTE  Harmonized as EN 60335-2-79:2002 (modified).
IEC 60335-2-85 NOTE  Harmonized as EN 60335-2-85:2003 (not modified).
ISO 13732-1 NOTE  Harmonized as EN ISO 13732-1:2008 (not modified).
____________
p Add:
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications

Publication Year Title EN/HD Year

1)
ISO 6344-2 - Coated abrasives - Grain size analysis - - -
Part 2: Determination of grain size distribution
of macrogrits P12 to P220
____________
1)
Undated reference.
IEC 60335-2-54
Edition 4.0 2008-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-54: Particular requirements for surface-cleaning appliances for household
use employing liquids or steam

Appareils électrodomestiques et analogues – Sécurité –
Partie 2-54: Règles particulières pour les appareils de nettoyage des surfaces à
usage domestique, utilisant des liquides ou de la vapeur

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 13.120; 97.180 ISBN 2-8318-1001-5
– 2 – 60335-2-54 © IEC:2008
CONTENTS
FOREWORD.4
INTRODUCTION.7
1 Scope.8
2 Normative references .9
3 Definitions .9
4 General requirement.9
5 General conditions for the tests .9
6 Classification.10
7 Marking and instructions.10
8 Protection against access to live parts.11
9 Starting of motor-operated appliances .11
10 Power input and current .11
11 Heating .11
12 Void.12
13 Leakage current and electric strength at operating temperature.12
14 Transient overvoltages .12
15 Moisture resistance .12
16 Leakage current and electric strength.12
17 Overload protection of transformers and associated circuits .12
18 Endurance.12
19 Abnormal operation .12
20 Stability and mechanical hazards .13
21 Mechanical strength .13
22 Construction .15
23 Internal wiring.16
24 Components .16
25 Supply connection and external flexible cords .16
26 Terminals for external conductors.17
27 Provision for earthing .17
28 Screws and connections .17
29 Clearances, creepage distances and solid insulation .17
30 Resistance to heat and fire.17
31 Resistance to rusting.17
32 Radiation, toxicity and similar hazards.17
Annexes .
Bibliography.22

60335-2-54 © IEC:2008 – 3 –
Figure 101 – Apparatus for testing the abrasion resistance of current-carrying hoses .18
Figure 102 – Apparatus for testing the resistance to flexing of current-carrying hoses .19
Figure 103 – Configuration of the hose for the freezing treatment .20
Figure 104 – Flexing positions for the hose after removal from the freezing cabinet.20

– 4 – 60335-2-54 © IEC:2008
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-54: Particular requirements for surface-cleaning appliances
for household use employing liquids or steam

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60335-2-54 has been prepared by IEC technical committee 61:
Safety of household and similar electrical appliances.
This fourth edition cancels and replaces the third edition published in 2002 and its
Amendment 1 (2004) and Amendment 2 (2007). It constitutes a technical revision.
The principal change in this edition as compared with the third edition of IEC 60335-2-54 is as
follows (minor changes are not listed):
The scope has been further restricted to cover appliances where the product of pressure (in
MPa) and container volume (in l) does not exceed 5.

60335-2-54 © IEC:2008 – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
61/3676/FDIS 61/3699/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fourth edition (2001) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for electric surface-
cleaning appliances employing liquids or steam.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 6 – 60335-2-54 © IEC:2008
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.
The following differences exist in the countries indicated below.
– 6.1: Hand-held cleaning appliances and parts held in the hand in normal use shall be class II or class III
(Netherlands).
– 22.103: The dimensions of the inlet aperture are different (USA).

60335-2-54 © IEC:2008 – 7 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
normal use taking into account the manufacturer's instructions. It also covers abnormal
situations that can be expected in practice and takes into account the way in which
electromagnetic phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the appliance is connected to the supply
mains. However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into
consideration when developing the general and particular requirements for the IEC 60335 series of standards. For
example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as
ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and test
...