Abstract

Revision of TIPHON Release 3 scope document to contain only the Release 3 documents and supporting tutorial information explaining what the release is and how the documents relate.

Status
Published
Publication Date
31-Mar-2004
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2004
Due Date
01-Apr-2004
Completion Date
01-Apr-2004

Buy Documents

Technical report

SIST-TP TR 101 301 V2.1.1:2004

English language (37 pages)
Preview
Preview
e-Library read for
×1 day

SIST-TP TR 101 301 V2.1.1:2004 is the Slovenian adoption of ETSI TR 101 301 V2.1.1, a Technical Report from ETSI on Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3. It describes the Release 3 document set, the service and network ideas behind it, and how the documents relate to one another for voice and telephony interworking across Voice over IP (VoIP) and Switched Circuit Network (SCN) environments.

What does SIST-TP TR 101 301 V2.1.1:2004 specify?

SIST-TP TR 101 301 V2.1.1:2004 specifies the scope, structure and purpose of TIPHON Release 3. It is an overview document: clause 4 introduces the release plan, the basic scenarios and the TIPHON reference model, clause 5 identifies the Release 3 content, and Annex A explains the release process in more detail.

The document ties Release 3 to the earlier TIPHON work and shows how the Release 3 documents fit together. It is a definition and navigation guide for the release, not a document that solves the technical issues it lists.

AnnexWhat it covers
Annex ATIPHON Release 3 background, the release process, the Step A to Step E structure, domains and functional groups, the transport and application planes, the basic call example, and technology mapping and verification

What are the key requirements of SIST-TP TR 101 301 V2.1.1:2004?

SIST-TP TR 101 301 V2.1.1:2004 sets the Release 3 scope around simple call voice service and the technical framework needed to support it. In practice, it tells a reader what TIPHON Release 3 is meant to cover, which capabilities are in scope, and which later topics are deferred.

Release 3 focus and exclusions

Clause 5 and Annex A center Release 3 on simple call voice services that aim to be on a par with the Public Switched Telephone Network (PSTN). The covered topics include emergency calls, Calling Line Identification Presentation (CLIP), Calling Line Identification Restriction (CLIR), number portability, Quality of Service (QoS), privacy, lawful interception, authentication, billing, user mobility (roaming), carrier preselection and call forwarding services. In practice, this means Release 3 is about the core telephony features that operators need for real service launch and interworking.

The document also lists topics deferred to later work, including APIs, management, 3 party calls, conferencing, multimedia and instant messaging. That tells implementers not to treat Release 3 as a general multimedia or service management specification.

Naming, numbering and registration

Annex A explains that call set-up and service capabilities depend on names that must be resolved into addresses. For public telephony, support for ITU-T E.164 naming is essential, and the document points to TR 101 326 for name-to-address resolution and TR 101 858 for number portability. In practice, a service provider must decide how users are identified, how those identities are resolved, and how roaming and home-network registration affect call routing.

Quality of Service

Annex A treats QoS as a central Release 3 topic and splits it into call set-up quality and call quality. It describes end-to-end delay and end-to-end speech quality as the main user-visible parameters, and it points to the later TIPHON QoS parts for the detailed classes, signalling, measurement methods and design guidance. In practice, this means network and service teams have to define what “good voice” means, measure it, and map it to their network design.

Security

Annex A says Release 3 addresses private, uninterrupted and authenticated communication. It names IP security (IPsec), Transport Layer Security (TLS) and ITU-T H.235 as mechanisms that can be used at different layers. In practice, security is not treated as a single feature but as something that can be applied at the IP, transport or application level depending on the technology.

Domains, functional groups and planes

Annex A defines end-user, service and transport domains, and it breaks the system into functional groups such as terminal, terminal registration, network, gateway, serving, intermediate and home. It also separates the TIPHON application plane from the TIPHON transport plane and links them through service access points such as TCC-SAP, TR-SAP, TT-SAP and TLL-SAP. In practice, this gives implementers a way to place responsibilities in the right part of the system and to keep service logic separate from transport functions.

Release process and technology mapping

Clause 5 and Annex A describe TIPHON Release 3 as a five-step process: Release Definition, Capability Definition, Reference Architecture, Implementation Framework, and Technology Mapping and Verification. The document shows how abstract requirements are turned into protocol frameworks, profiles, mapping documents, PICS and test specifications, including mappings to H.323, SIP and H.248. In practice, this is the bridge between the release concept and implementable, testable protocol profiles.

What terms does SIST-TP TR 101 301 V2.1.1:2004 define?

SIST-TP TR 101 301 V2.1.1:2004 uses a fixed set of Release 3 abbreviations and terms so that the related TIPHON documents stay consistent.

  • TIPHON - Telecommunications and Internet Protocol Harmonization Over Networks, the ETSI project covering telephony interworking across circuit and IP networks.
  • VoIP - Voice over IP, used here for packet-based voice calls between IP networks or between IP and SCN networks.
  • SCN - Switched Circuit Network, the traditional telephony network class that includes systems such as PSTN, ISDN and GSM-related interworking.
  • QoS - Quality of Service, the set of delay, speech quality and related performance aspects that affect voice service experience.
  • ITSP - IP Telephony Service Provider, the service provider that controls a TIPHON service domain.
  • TCC-SAP - TIPHON Call Control Service Access Point, the interface where call control functions exchange service primitives.
  • TLL-SAP - TIPHON Lower Layer Service Access Point, the interface used for lower-layer communication in the TIPHON plane model.

Who uses SIST-TP TR 101 301 V2.1.1:2004?

SIST-TP TR 101 301 V2.1.1:2004 is used by TIPHON project engineers, VoIP service architects, network operators, equipment vendors and conformance testers. It is also useful for buyers or technical reviewers who need to understand what Release 3 covers before selecting companion TIPHON specifications.

In practice, different roles use it for different tasks:

  • standards writers use it to see how Release 3 is structured into steps and document types
  • service providers use it to check which telephony capabilities are in scope
  • network architects use it to understand domains, functional groups and the plane model
  • protocol engineers use it to see how SIP, H.323 and H.248 relate to the TIPHON framework
  • test teams use it to locate the PICS, ATS and test-purpose documents connected with Release 3

Which standards are used with SIST-TP TR 101 301 V2.1.1:2004?

Standard(s)What it contributes
TR 101 835TIPHON project method, used as the process basis for Release 3
TR 101 300Background description of technical issues
TS 101 314 and TS 101 315Abstract architecture, reference points, functional entities and information flows
TS 101 882Protocol framework and interface requirements for the meta-protocol
TR 101 311 and TS 101 878Transport plane requirements and service capabilities for a simple call
TR 101 326 and TR 101 858E.164 name-to-address resolution and number portability implications
TR 101 329-1, TS 101 329-2, TS 101 329-3, TS 101 329-5, TR 101 329-7QoS concepts, classes, signalling, measurement methods and design guidance
TR 102 008Agreed terms and definitions for Release 3
TS 101 883, TS 101 884, TS 101 885Technology mappings to H.323, SIP and H.248
TS 101 804-1, TS 101 804-2, TS 101 804-3, TS 101 889-1, TS 101 889-2, TS 101 889-3PICS and conformance test specifications for mapped technologies
ITU-T E.164, G.107, P.310, H.235, H.225.0, H.245, H.248, H.323, Q.931 and IETF RFC 2401, RFC 2246, RFC 2327, RFC 2543, RFC 3015External numbering, QoS, security, multimedia control, call control and protocol references used throughout the Release 3 framework

What does the SIST-TP TR 101 301 V2.1.1:2004 document contain?

SIST-TP TR 101 301 V2.1.1:2004 contains the TIPHON Release 3 scenario set, the “tool box” idea, and a simple reference model in clause 4. It then lists the Release 3 document types, work items and deliverables in clause 5, including the QoS, architecture, technology mapping and test-related parts.

Annex A adds the deeper technical narrative: the background to TIPHON, the role of Release 1 and Release 2, the Step A to Step E release process, the naming and QoS discussions, the domain and functional-group model, the transport/application plane split, a basic call example, and the mapping of the abstract framework to H.323, SIP and H.248. For readers, that means the document is a roadmap to the Release 3 set and a guide to how the related specifications fit together for design, implementation and verification.

Buy Documents

Technical report

SIST-TP TR 101 301 V2.1.1:2004

English language (37 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

SIST-TP TR 101 301 V2.1.1:2004 is a technical report published by the Slovenian Institute for Standardization (SIST). Its full title is "Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Release Definition; TIPHON Release 3 Definition". This standard covers: Revision of TIPHON Release 3 scope document to contain only the Release 3 documents and supporting tutorial information explaining what the release is and how the documents relate.

Revision of TIPHON Release 3 scope document to contain only the Release 3 documents and supporting tutorial information explaining what the release is and how the documents relate.

SIST-TP TR 101 301 V2.1.1:2004 is classified under the following ICS (International Classification for Standards) categories: 33.020 - Telecommunications in general. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST-TP TR 101 301 V2.1.1:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2004
Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON), 3.
izdaja - Definicija izdaje - Definicija 3. izdaje TIPHON
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON)
Release 3; Release Definition; TIPHON Release 3 Definition
Ta slovenski standard je istoveten z: TR 101 301 Version 2.1.1
ICS:
33.020 Telekomunikacije na splošno Telecommunications in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical Report
Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON) Release 3;
Release Definition;
TIPHON Release 3 Definition
2 ETSI TR 101 301 V2.1.1 (2002-02)

Reference
RTR/TIPHON-00002 [2]
Keywords
Internet, IP, PSTN, speech, telephony, VoIP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.
ETSI
3 ETSI TR 101 301 V2.1.1 (2002-02)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Abbreviations.7
4 An overview of the TIPHON Approach.7
4.1 Basic TIPHON Scenarios.8
4.1.1 Scenario 1: VoIP call to SCN user.9
4.1.2 Scenario 2: SCN call to VoIP user.9
4.1.3 Scenario 3: SCN call to SCN user via a VoIP network .9
4.1.4 Scenario 0: VoIP call to VoIP user .10
4.2 The TIPHON "Tool Box".10
4.3 A simple TIPHON reference model .11
4.3.1 TIPHON network element .11
4.3.2 Reference model.12
5 Release 3.12
5.1 Document type definitions .12
5.2 Definition of Terms.13
5.3 TIPHON Release 3 Work Items .13
5.4 Future TIPHON releases .16
Annex A: TIPHON Release 3 .17
A.1 Background.17
A.1.1 TIPHON Releases 1 and 2.18
A.2 The TIPHON Release 3 Process .18
A.3 Release Definition (Step A) .19
A.3.1 Simple call requirements .20
A.3.1.1 Naming.20
A.3.1.2 Quality of Service .21
A.3.1.3 Security.22
A.4 Capabilities and Requirements (Step B).23
A.4.1 Domains.24
A.4.2 Functional Groups.24
A.4.3 Introduction to the TIPHON transport plane.25
A.5 Reference Architecture (Step C) .26
A.5.1 Service capability example.27
A.5.2 User Roaming Considerations.27
A.5.3 TIPHON Scenario 0 Functional Groups.28
A.5.4 TIPHON Scenario 1 Functional Groups.29
A.5.5 TIPHON Scenario 2 Functional Groups.29
A.5.6 TIPHON Scenario 3 functional groups .30
A.6 Implementation framework (Step D) .30
A.6.1 Basic call example.33
A.7 Technology Mapping and Verification (Step E) .34
A.7.1 Mapping to standard protocols and entities.35
History .37

ETSI
4 ETSI TR 101 301 V2.1.1 (2002-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Report (TR) has been produced by ETSI Project Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON).
The present document describes the scope of the TIPHON Release 3 and shows the relevant documents and their inter-
relationships.
ETSI
5 ETSI TR 101 301 V2.1.1 (2002-02)
1 Scope
The present document provides a description of the content of TIPHON Release 3 and shows the relevant documents
and their inter-relationships.
Each TIPHON release builds upon and extends the previous release. In this manner Release N contains and extends
Release N-1, and is itself extended by Release N+1.
The present document is structured as follows:
- clause 4 introduces the release plan documentation set;
- clause 5 defines the content and capabilities of TIPHON Release 3.
The present document does not provide solutions for the technical issues that are identified therein.
The present document is prepared in accordance with the TIPHON project method defined in TR 101 835 [1] and fulfils
the requirements of STEP A.
In addition, the present document contains a comprehensive overview and description of the technical aspects of
TIPHON Release 3.
2 References
For the purposes of this Technical Report (TR) the following references apply:
[1] ETSI TR 101 835: "Telecommunications and Internet Protocol Harmonization over Networks
(TIPHON); Project method definition".
[2] ETSI TR 101 300: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Description of Technical Issues".
[3] ETSI TS 101 882: "Telecommunications and Internet protocol Harmonization Over Networks
(TIPHON) Release 3; Protocol Framework Definition and Interface Requirement Definition;
General (meta-protocol)".
[4] ETSI TS 101 314: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Abstract Architecture and Reference Points Definition; Network
Architecture and Reference Points".
[5] ETSI TR 101 326: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); The procedure for determining IP addresses for routeing packets on interconnected IP
networks that support public telephony".
[6] ETSI TR 101 858: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Number portability and its implications for TIPHON networks".
[7] ETSI TR 101 329-1: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 1: General aspects
of Quality of Service (QoS)".
[8] ITU-T Recommendation E.600: "Terms and definitions of traffic engineering".
[9] ITU-T Recommendation G.107: "The E-Model, a computational model for use in transmission
planning".
[10] ITU-T Recommendation P.310: "Transmission characteristics for telephone-band (300 - 3 400 Hz)
digital telephones".
[11] ETSI TS 101 329-5: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 5: Quality of
Service (QoS) measurement methodologies".
ETSI
6 ETSI TR 101 301 V2.1.1 (2002-02)
[12] ETSI TS 101 329-2: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 2: Definition of
speech Quality of Service (QoS) classes".
[13] ETSI TR 101 329-7: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 7: Design guide for
elements of a TIPHON connection from an end-to-end speech transmission performance point of
view".
[14] ETSI TS 101 329-3: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 3: Signalling and
control of end-to-end Quality of Service (QoS)".
[15] IETF RFC 2401: "Security Architecture for the Internet Protocol".
[16] IETF RFC 2246: "The TLS Protocol Version 1.0", T. Dierks, C. Allen".
[17] ITU-T Recommendation H.235: "Security and encryption for H-Series (H.323 and other H.245
based) multimedia terminals".
[18] ETSI TR 101 877: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Requirements Definition Study; Scope and Requirements for a Simple call".
[19] ETSI TR 101 311: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Service Independent requirements definition; Transport Plane".
[20] ETSI TS 101 878: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Service Capability Definition; Service Capabilities for a simple call".
[21] ETSI TS 101 315: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Functional Entities, Information Flow and Reference Point Definitions; For
application of TIPHON functional architecture to inter-domain services".
[22] ETSI ETR 298: "Methods for Testing and Specification (MTS); Specification of protocols and
services; Handbook for SDL, ASN.1 and MSC development".
[23] ITU-T Recommendation H.225.0: "Media stream packetization and synchronization on non-
guaranteed quality of service LANs".
[24] ITU-T Recommendation H.245: "Control protocol for multimedia communication".
[25] ITU-T Recommendation H.248: "Gateway control protocol".
[26] IETF RFC 2327: "SDP: Session Description Protocol", Handley, M. and V. Jacobson".
[27] IETF RFC 2543: "SIP: Session Initiation Protocol".
[28] IETF RFC 3015: "Megaco Protocol Version 1.0".
[29] ETSI TS 101 883: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Technology Mapping; Implementation of TIPHON architecture using
H.323".
[30] ETSI TS 101 884: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Technology Mapping; Implementation of TIPHON architecture using SIP".
[31] ETSI TS 101 885: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Technology Mapping; Implementation of TIPHON architecture using
H.248".
[32] ETSI TR 102 008: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Terms and Definitions".
[33] ITU-T Recommendation H.323: "Packet-based multimedia communications systems".
[34] ITU-T Recommendation E.164: "The international public telecommunication numbering plan".
ETSI
7 ETSI TR 101 301 V2.1.1 (2002-02)
[35] ITU-T Recommendation Q.931: "ISDN user-network interface layer 3 specification for basic call
control".
3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
API Application Programming Interface
ASN1 Abstract Syntax Notation 1
ATS Abstract Test Suite
BICC Bearer Independent Call Control
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
DSS1 Digital Subscriber Signalling 1
GSM Global System for Mobile communications
ICANN Internet Corporation for Assigned Names and Numbers
IN Intelligence Network
IP Internet Protocol
ISDN Integrated Services Digital Network
ISUP Integrated Switched Digital Network User Part
ITSP IP Telephony Service Provider
MSC Message Sequence Charts
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PSTN Public Switched Telephone Network
PT Packet Telephony
QoS Quality of Service
SAP Service Access Point
SCN Switched Circuit Network
SDL Specification and Description Language
SIP Session Initiation Protocol
TCC TIPHON Call Control
TCC-SAP TIPHON Call Control Service Access Point
TLL TIPHON Lower Layer
TLL-SAP TIPHON Lower Layer Service Access Point
TLS Transport Layer Security
TNO Transport Network Operator
TR TIPHON Registration
TR-SAP TIPHON Registration Service Access Point
TSS&TP Test Suite Structure and Test Purposes
TT TIPHON Transport
TT-SAP TIPHON Transport Service Access Point
VoIP Voice over IP
4 An overview of the TIPHON Approach
Release 3 is the first major edition of TIPHON documentation to be made publicly available and, as such, represents a
considerable amount of effort from the members of the TIPHON Project.
Several telephony-related requirements have been identified for the support of simple call i.e. voice calls which are on a
par with the PSTN and include:
• Emergency calls;
• CLIP/CLIR;
• Number portability;
ETSI
8 ETSI TR 101 301 V2.1.1 (2002-02)
• QoS for the calls;
• Privacy;
• Lawful Interception;
• Authentication of users;
• Billing;
• User mobility (roaming);
• Carrier (pre)selection;
• Call forwarding services.
The following are deferred to a subsequent TIPHON release:
• APIs;
• Management;
• 3 party calls;
• Conferencing;
• Multi-media;
• Instant messaging.
These Key requirements include naming and numbering policies, Quality of Service and security.
4.1 Basic TIPHON Scenarios
In order to establish the requirements for service creation, architecture, signalling and service support in a TIPHON
environment, it is necessary to consider four basic scenarios [2] from which all other (more complex) scenarios can be
derived. These basic scenarios are:
• Scenario 1: simple call from a user in a Voice over IP (VoIP) network to another user in an adjacent Switched
Circuit Network (SCN) such as ISDN.
• Scenario 2: simple call from a user in a SCN, to another user in an adjacent VoIP network using SIP or a similar
protocol.
• Scenario 3: call from a user in a SCN to a user in another SCN where the call is routed through one or more
transit networks of which at least one is a VoIP network.
- Scenario 0: call from a user in a VoIP network is routed to another user in a different VoIP network.
In each of these scenarios (see figure 1 to 4), the interface between the disparate networks is identified as a "TIPHON
Gateway". In real-world implementations this may or may not be a separate item of physical equipment but it is the
interoperation of both protocol and media at this point that is a focus of TIPHON standardization.
The other focus of TIPHON is the behaviour within the domains (especially those on IP technology) where the current
state of the art is not mature enough that it allows proper interworking with the SCN.
ETSI
9 ETSI TR 101 301 V2.1.1 (2002-02)
4.1.1 Scenario 1: VoIP call to SCN user
Call Setup
VoIP SCN
VoIP SCN
Network
Network
TIPHON
Signalling Path
Gateway
Media Path
Figure 1: TIPHON Scenario 1
A call arrives at a TIPHON Gateway from a VoIP user and the destination is in an adjacent SCN. Signalling takes place
between the VoIP network and the Gateway where the Gateway acts on behalf of the SCN user.
4.1.2 Scenario 2: SCN call to VoIP user
Call Setup
SCN VoIP
SCN VoIP
Network
Network
TIPHON
Signalling Path
Gateway
Media Path
Figure 2: TIPHON Scenario 2
A call arrives at a TIPHON Gateway from a user in a SCN and the destination is in an adjacent VoIP network.
Signalling takes place between the Gateway and the VoIP network with the Gateway acting on behalf of the calling
user.
4.1.3 Scenario 3: SCN call to SCN user via a VoIP network
Call Setup
SCN VoIP SCN
SCN VoIP SCN
Network
Network
TIPHON TIPHON
Signalling Path
Gateway Gateway
Media Path
Figure 3: TIPHON Scenario 3
A call from one SCN user to another SCN user passes through at least one VoIP network, transiting a TIPHON gateway
at each network interworking boundary. The gateways act on behalf of the SCN users in their negotiations with the
VoIP network(s). This scenario is essentially a combination of Scenarios 1 and 2.
ETSI
10 ETSI TR 101 301 V2.1.1 (2002-02)
4.1.4 Scenario 0: VoIP call to VoIP user
Two VoIP. This scenario is shown in figure 4 and is referred to as TIPHON Scenario 0.
Call Setup
VoIP VoIP
VoIP VoIP
Network Network
Network Network
TIPHON
Signalling Path
Gateway
Media Path
Figure 4: TIPHON Scenario 0
4.2 The TIPHON "Tool Box"
In order to achieve interworking between existing SCN technologies (for example, DSS1) and IP media technologies
(for example, SIP [27]) as well as possible future technologies, TIPHON has specified a meta-protocol which provides
communication between the two sides of a TIPHON Gateway. Although it is unlikely, and unnecessary, that any
TIPHON-compliant equipment will implement the meta-protocol, a protocol that has been mapped to the meta-protocol
should also interwork with any other protocol that is also mapped to the meta-protocol. It is these mappings and the
profile standards (closing options and identifying limitations) that are the key outputs of the overall TIPHON process.
This process, as shown in figure 5, can be viewed as a tool box taking a set of fixed TIPHON requirements and a range
of technology-specific inputs to produce mapping and profile standards with their associated test suites.
Technology Standards
Requirements
Protocol
Architecture
Numbering
TIPHON
Tool Box
Services
Security
QoS
Mapping
Profile
and
Test
Profiles
Suites
Figure 5: The TIPHON "Tool Box"
Although some mapping and profile standards are included in the TIPHON project deliverables, the meta-protocol is
published as an open standard so that any standardization body may prepare TIPHON mapping and profile standards for
any communication protocol that they have responsibility for.
ETSI
11 ETSI TR 101 301 V2.1.1 (2002-02)
4.3 A simple TIPHON reference model
4.3.1 TIPHON network element
A review of the scenarios shown in figure 1 to 4 is helpful in determining the basic modelling aspects which are
required for the development of the TIPHON protocol framework [3]. In generic terms, each network involved in a
TIPHON environment can be considered, with its TIPHON Gateway(s), to be a "black-box" as shown in figure 6.
Network
Network
TIPHON TIPHON
Signalling Path
Gateway Gateway
Media Path
Figure 6: TIPHON network element
A special case of this black-box is a network connected to a TIPHON gateway on one side but to a user on the other, as
shown in figure 7.
Network
Network
User
TIPHON
Signalling Path
Gateway
Media Path
Figure 7: TIPHON network element with Gateway and user
The TIPHON network element shown in figure 7 is further refined into 2 elements representing the calling user's
network and the called user's network, as shown in figure 8.
Network Network
Network Network
Calling Called
User TIPHON TIPHON User
Signalling Path
Gateway Gateway
Media Path
Figure 8: Origination and destination TIPHON network elements
ETSI
12 ETSI TR 101 301 V2.1.1 (2002-02)
4.3.2 Reference model
Any of the scenarios in figure 1 to 4 can now be constructed using the three TIPHON network elements shown in
figures 6 and 8. These elements can also be used as the basis for a TIPHON reference model. This is shown in simple
form in figure 9.
TIPHON Gateway TIPHON Gateway
Originating Transit Destination
TIPHON Network TIPHON Network TIPHON Network
Gateway Gateway Gateway Gateway
Reference Reference Reference Reference
Point Point Point Point
Figure 9: Simple TIPHON reference model
Communication at the gateway reference point is implemented using the TIPHON meta-protocol (see clause 4.2) with
which the network protocols (originating, transit and destination) interwork.
TS 101 314 [4] specifies a more detailed reference model and reference configuration for TIPHON systems.
5 Release 3
The main focus of the TIPHON Release 3 project was to ensure that all technical issues related to Voice over IP
(VoIP) - particularly with respect to Scenario 0 - were considered and fully analysed. The published Release 3
documents reflect this goal.
The remainder of clause 5 in the present document identifies each of the documents published as part of TIPHON
Release 3.
5.1 Document type definitions
TIPHON documents produced for Releases 3 fall within the categories defined in table 1.
Table 1: Document type categorization and definitions
Step Document Category ETSI document type
RDS Requirements Definition Study Technical Report
A Release Definition Technical Specification
Design Guide Technical Report
B
Service Independent Requirements Definition Technical Report

Service Capability Definition Technical Specification
C Abstract Architecture and Reference Ponts Definition Technical Specification
Information Flow Definitions Technical Specification
D Management Framework Definition Technical Report
Protocol Framework Definition Technical Specification
Interface Protocol Requirements Definition Technical Specification
E
Technology Compliance Specification Technical Specification
Technology mapping Technical Specification

ETSI
13 ETSI TR 101 301 V2.1.1 (2002-02)
5.2 Definition of Terms
To ensure that the definition of terms used for TIPHON Release 3 documents are used in a consistent way,
TR 102 008 [32] contains an agreed set of definition of terms used in Release 3.
5.3 TIPHON Release 3 Work Items
The following issues have been identified as forming the essential elements of TIPHON Release 3.
Table 2: Topics and issues covered in release 3
WG Topic
1 Service capabilities to support simple call
1 Service independent requirements for service and network management
1 Service independent requirements for the transport plane
2 Amendments of architecture to include lawful interception, security and usage information
2 Extension for Inter Domain services
3 Profiling of key protocols (SIP, H.323, H.248)
3 Protocol Independent Framework
4 Choice of identification/contact address
4 Address resolution service
5 QoS Classification
5 QoS Functions and Primitives
5 QoS Control
5 QoS Measurement
5 QoS Design Guidelines
6 Complete set of test specs for H.225.0
6 PICS for H.245 and H.248
6 Interoperability test spec
8 Lawful interception
8 Security profiles
The remainder of this clause identifies those TIPHON work items that support these issues.
Table 3: TIPHON work items forming release 3
ETSI
TIPHON Work Item Step Title
Number
DTR/TIPHON-01004.1a 101 303 RDS Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
Requirements Definition Study
Introduction to service and network management;
DTR/TIPHON-01005 101 308 RDS Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON);
Requirements Definition Study;
SIP and H.323 Interworking
DTR/TIPHON-01008 101 877 RDS Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON);
Requirements Definition Study;
Scope and Requirements for a Simple call
DTR/TIPHON-08001 101 750 RDS Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON);
Requirements Definition Study;
Studies into the Impact of lawful interception;
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTR/TIPHON-00002 [2] 101 301 A
Release Definition;
TIPHON Release 3 Definition
Telecommunications and Internet Protocol Harmonization over Networks
DTR/TIPHON-01007 101 835 A (TIPHON);
Project method definition
ETSI
14 ETSI TR 101 301 V2.1.1 (2002-02)
ETSI
TIPHON Work Item Step Title
Number
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTR/TIPHON-01006 101 311 B
Service Independent requirements definition;
Transport Plane
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-01009 101 878 B
Service Capability Definition;
Service Capabilities for a simple call
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTR/TIPHON-08003 101 772 B
Service Independent Requirements Definition;
Lawful Interception - Top Level Requirements
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-02007 101 315 C
Functional Entities, Information Flow and Reference Point Definitions;
For application of TIPHON functional architecture to inter-domain services
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTS/TIPHON-02009 101 314 C
Abstract Architecture and Reference Points Definition;
Network Architecture and Reference Points
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-03016 101 882 D Protocol Framework Definition and Interface Protocol Requirements
Definition;
General
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-03017 101 883 E
Technology Mapping;
Implementation of TIPHON architecture using H.323
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-03018 101 884 E
Technology Mapping;
Implementation of TIPHON architecture using SIP
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-03019 101 885 E
Technology Mapping;
Implementation of TIPHON architecture using H.248
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTS/TIPHON-06015 101 335 E
Release PICS;
Interoperability test
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-06016-1 101 804-1 E
Technology Compliance Specifications;
Revision/Update of H.225.0 PICS for Terminal, Gatekeeper and Gateway
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-06016-2 101 804-2 E Technology Compliance Specifications;
Part 2: H.225.0 Conformance Test Specifications; Test Suite Structure and
Test Purposes (TSS&TP) for Terminal, Gatekeeper and Gateway
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
Technology Compliance Specifications;
DTS/TIPHON-06016-3 101 804-3 E
Part 3: H.225.0 Conformance Test Specifications; Abstract Test Suite
(ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma for Terminal, Gatekeeper and Gateway
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
Technology Compliance Specifications;
DTS/TIPHON-06017-1 101 889-1 E
TIPHON profile for ITU-T Recommendation H.248;
Part 1: Protocol Implementation Conformance Statement (PICS) proforma
specification
ETSI
15 ETSI TR 101 301 V2.1.1 (2002-02)
ETSI
TIPHON Work Item Step Title
Number
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-06017-2 101 889-2 E Technology Compliance Specifications;
TIPHON profile for ITU-T Recommendation H.248;
Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-06017-3 101 889-3 E
Technology Compliance Specifications;
TIPHON profile for ITU-T Recommendation H.248
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-06018-1 101 890-1 E Technology Compliance Specifications;
TIPHON profile for ITU-T Recommendation H.245;
Part 1: Protocol Implementation Conformance Statement (PICS) proforma
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
DTS/TIPHON-06018-2 101 890-2 E Technology Compliance Specifications;
TIPHON profile for ITU-T Recommendation H.245;
Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
Technology Compliance Specifications;
DTS/TIPHON-06018-3 101 890-3 E
TIPHON profile for ITU-T Recommendation H.245;
Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) specification
QoS Work Items
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTR/TIPHON-05007 101 329-1 WG 5
End to End Quality of Service in TIPHON Systems;
Part 1: General aspects of Quality of Service (QoS)
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTS/TIPHON-05012a 101 329-2 WG 5
End-to-end Quality of Service in TIPHON Systems;
Part 2: Definition of Speech Quality of Service (QoS) Classes
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTS/TIPHON-05003 [2] 101 329-3 WG 5
End-to-End Quality of Service in TIPHON Systems;
Part 3: Signalling and Control of end-to-end Quality of Service (QoS)
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
RTS/TIPHON-05008a 101 329-5 WG 5
End-to-end Quality of Service in TIPHON Systems;
Part 5: Quality of Service (QoS) measurement methodologies
DTR/TIPHON-05004 101 329-6 WG 5 Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
End to End Quality of Service in TIPHON Systems;
Part 6: Actual measurements of network and terminal characteristics and
performance parameters in TIPHON networks and their influence on voice
quality
DTR/TIPHON-05011 101 329-7 WG 5 Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3;
End to End Quality of Service in TIPHON Systems;
Part 7: Design Guide for elements of a TIPHON connection from an
end-to-end speech transmission performance point of view
Other: 2 Deliverables
Telecommunications and Internet Protocol Harmonization Over Networks
DTR/TIPHON-01014 102 008 Other (TIPHON) Release 3;
Terms and Definitions
Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON);
RTR/TIPHON-04006 [2] 101 326 Other
The procedure for determining IP addresses for routeing packets on
interconnected IP networks that support public telephony

ETSI
16 ETSI TR 101 301 V2.1.1 (2002-02)
0002 1005
Release Release
Step A
1007 1014
Definition Plan
4006 5004
5007 5011
7002 8001
Step B
Service
1004 1006
Service
Capability These also
1009 1010 1011
Independent
affect each
Definition
5012 Requirements 8003
step
Tree for Simple Call only
Step C
Netw ork Management
Release
Information Information
5003 Abstract
Flow s Flow s
Architecture
SDL & UML SDL & UML
2007 2009
Step D
Protocol Management
Framework Framew ork
Definition Definition
Interface Management
Protocol 3017, 3018 Interface
3019, 8004
Requirements Requirem ents
Definition Definition
Step E
Technology
Compliance
Specification
Target Area
6012 6013
Release PICS
6015 6016
6017 6018
Figure 10: Documents contained in Release 3 (step A not shown)
Annex A presents an overview of the TIPHON process from the perspective of TIPHON Release 3 specifications.
5.4 Future TIPHON releases
In future releases of the document set, it is the intention of the TIPHON project to:
1) extend the technical coverage to include the SCN aspects of all scenarios;
2) rationalize the documentation to align it closer with existing formats for communication standards;
3) consider the impact of a full range of supplementary services (as already defined for existing SCNs) on the
meta-protocol and VoIP signalling systems
4) extend the service capabilities from the simple call to include multimedia, and the architecture to facilitate multi-
point operation.
ETSI
17 ETSI TR 101 301 V2.1.1 (2002-02)
Annex A:
TIPHON Release 3
A.1 Background
The telecommunications industry is promoting the migration from Switched Circuit Networks (SCN) to multi-service
packet networks. This migration will provide benefits in terms of economics and new services. One of the greatest
challenges in this migration is creating a packet-based infrastructure that will preserve the ubiquity, quality, and
reliability of voice services while allowing the greatest flexibility for use of the new packet technologies. In the present
document, an architecture is presented that can serve in both the migration path to that infrastructure and in all packet
solutions.
The aim of the Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) project is to
address service level interworking between traditional Switched Circuit Networks (SCNs) and the emerging next
generation networks based on VoIP technology. This objective supports the market for real-time telecommunication
services between users, including voice and related voice-band communication, such as facsimile, over multiple
network technologies.
Until recently, Packet Telephony (PT) technology was too immature to replace traditional telephony networks. Early
work on Packet telephony was focused on developing boxes and protocols to solve particular small-scale problems such
as long distance bypass. To be considered mature enough, the packet network must be able to adhere to commercial and
legal requirements. This implies that a PT deployment should be able to provide guarantees for the availability and
quality of the service, should be able to interwork with other packet telephony domains that may be governed by other
policies, and should allow billing for used services.
TIPHON Release 3 should enable users connected to IP-based networks to communicate between themselves and also
with users in SCNs especially those served by PSTN, ISDN or GSM networks. TIPHON has considered a diverse set of
requirements including security, quality of service and numbering.
In this TIPHON Release, the issue of providing telephony services in a heterogeneous environment is addressed. A
generic method for service creation has been developed that is independent of any specific underlying network
technology e.g. switched circuit or packet based. TIPHON has identified an overarching technology and a generic
meta-protocol i.e. a domain-independent protocol framework.
The architecture described in this present document fully supports the fact that most calls traverse multiple provider
networks, which may use different transport technologies or call/service signalling protocols. To achieve these goals a
transport-independent, functional model for provider domains is created. This allows the solution to address, for
instance, introduction of new services separately from interworking between different transport technologies. A model
is proposed that groups transport-related functions and application-related functions in separate planes. The planes are
further divided into layers. The elements in these layers may be re-used as the building blocks for future generations of
similar services. The meta-protocols are used to generate profiles for the protocols associated with any given
communications network technology. By mapping this "meta-protocol" to individual network technologies, TIPHON
has ensured an effective path to an end-to-end network capability.
This approach leads to a packet telephony architecture that can be used to offer services on par with those offered on
legacy telephone networks and that can provide an evolution path to broadband and mobile applications.
However, multi-media conferencing, instant messaging and e-commerce are applications and services that go beyond
the common services provided by today's PSTN or basic Internet connectivity and will be addressed in a later release of
TIPHON.
ETSI
18 ETSI TR 101 301 V2.1.1 (2002-02)
A.1.1 TIPHON Releases 1 and 2
TIPHON Release 1 addressed a discrete set of scenarios comprising calls from:
• an IP device to a phone (scenario 1);
• a phone to an IP device (scenario 2);
• a phone to another phone via an IP network (scenario 3);
• an IP device to another IP device via a Switched Circuit Network (scenario 4).
These Release 1 scenarios were grouped into "Phases" of activity; Phase 1 related to scenario 1 and so on.
It rapidly became clear that a simple model was insufficient to achieve the projects aims since it left little opportunity
for equipment manufacturers and service providers to create scaleable, multi-vendor, multi-service provider, network
implementations.
Release 2 attempted to address the development of a more functionally orientated architecture elaborating on gateway
devices required to interconnect IP based terminals with switched circuit networks. The scenario models considered
within both of these releases failed to reflect the reality of IP networks being constructed from a concatenation of
individual discrete physical networks.
Consequently, a more versatile approach to the development of standards needed for viable VoIP was devised for
Release 3 and is described in the following clauses.
A.2 The TIPHON Release 3 Process
The TIPHON project has considered a wide range of complex technology issues arising from the inter-working of
differing and independently evolving network technologies. For exam
...