SIST EN ISO 10555-5:2000/A1:2000

SLOVENSKI STANDARD
SIST EN ISO 10555-5:2000/A1:2000
01-november-2000
Sterilni žilni katetri za enkratno uporabo - 5. del: Periferni katetri z notranjo iglo
(ISO 10555-5:1996/AM:1999)
Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters (ISO
10555-5:1996/AM:1999)
Sterile intravaskuläre Katheter zur einmaligen Verwendung - Teil 5: Periphere Katheter
mit innen liegender Kanüle (ISO 10555-5:1996/FDAM:1999)
Cathéters intravasculaires stériles, non réutilisables - Partie 5: Cathéters périphériques a
aiguille interne (ISO 10555-5:1996/FDAM:1999)
Ta slovenski standard je istoveten z: EN ISO 10555-5:1997/A1:2000
ICS:
11.040.25 Injekcijske brizge, igle in Syringes, needles an
katetri catheters
SIST EN ISO 10555-5:2000/A1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10555-5:2000/A1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 10555-5:2000/A1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 10555-5:2000/A1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 10555-5:2000/A1:2000
INTERNATIONAL ISO
STANDARD 10555-5
First edition
1996-06-15
AMENDMENT 1
1999-01-15
Corrected and reprinted
1999-07-15
Sterile, single-use intravascular
catheters —
Part 5:
Over-needle peripheral catheters
AMENDMENT 1
Cathéters intravasculaires stériles, non réutilisables —
Partie 5: Cathéters périphériques à aiguille interne
AMENDEMENT 1
A
Reference Number
ISO 10555-5:1996/Amd.1:1999(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 10555-5:2000/A1:2000
ISO 10555-5:1996/Amd.1:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Amendment 1 to International Standard ISO 10555-5:1996 was prepared by Technical Committee ISO/TC 84,
Medical devices for injections, Subcommittee SC 1, Syringes, needles and intravascular catheters for single use.
The purpose of this amendment is to introduce into ISO 10555-5:1996 requirements for the leak-tightness of vent
fittings.
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case pos
...