SIST EN 60317-23:2014/A1:2019
(Amendment)Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)
This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is:
– Grade 1: 0,020 mm up to and including 1,600 mm;
– Grade 2: 0,020 mm up to and including 1,600 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 23: Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-23:2013/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Partie 23: Fil brasable de section circulaire en cuivre émaillé avec polyesterimide, classe 180 (IEC 60317-23:2013/A1:2019)
Specifikacije za posebne vrste navijalnih žic - 23. del: Spajkljiva okrogla bakrena žica, prevlečena s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-23:2013/A1:2019)
General Information
- Status
- Published
- Publication Date
- 03-Oct-2019
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Oct-2019
- Due Date
- 06-Dec-2019
- Completion Date
- 04-Oct-2019
Relations
- Effective Date
- 07-Aug-2018
Overview
EN 60317-23:2014/A1:2019 (IEC 60317-23:2013/A1:2019) is the European amendment for solderable polyesterimide enamelled round copper winding wire, class 180. Prepared by IEC TC 55 and adopted by CENELEC, this amendment updates the original EN 60317-23:2014 text (A1 approved July 2019). The standard specifies material and test requirements that apply to enamelled copper wire intended for electrical windings where a solderable polyesterimide enamel is required.
Key Topics
- Product scope and designation
- Defines the particular type: solderable polyesterimide enamelled round copper wire, class 180.
- Relevant classification and labeling consistent with IEC/EN naming.
- Solderability (updated Clause 17)
- Solder bath temperature: (470 ± 5) °C.
- Nominal conductor diameter ≤ 0.100 mm: maximum immersion time 3 s.
- Nominal conductor diameter > 0.100 mm: maximum immersion time based on conductor diameter:
- Grade 1: 8 s/mm (immersion time = 8 × diameter [mm], minimum 3 s)
- Grade 2: 12 s/mm (immersion time = 12 × diameter [mm], minimum 3 s)
- Surface expectation: tinned wire shall be smooth and free from holes and enamel residues.
- Standardization and compliance
- Amendment A1 was approved by CENELEC and is to be implemented nationally without alteration.
- Reference identifiers: EN 60317-23:2014/A1:2019, IEC 60317-23:2013/A1:2019. ICS codes: 29.060.10, 77.150.30.
Applications
This standard is primarily used where reliable solderable enamelled winding wire is required, including:
- Motors and generators
- Transformers and inductors
- Solenoids and relays
- Electromechanical assemblies and precision coils
Practically, manufacturers of enamelled copper wire, component makers, electrical engineers, test laboratories and procurement/specification teams use EN 60317-23:2014/A1:2019 to ensure material consistency, solderability performance and conformity with European/IEC requirements.
Who should use this standard
- Wire and cable manufacturers specifying production and quality control criteria
- Component manufacturers designing wound electrical parts
- QA and test labs performing solderability and acceptance tests
- Specifiers and purchasers requiring harmonized product definitions for procurement
Related Standards (if applicable)
- IEC/EN series: IEC 60317 (general series for particular types of winding wires)
- National adoptions and CENELEC implementation documents for EN 60317 series
Keywords: solderable polyesterimide enamelled round copper wire, EN 60317-23:2014/A1:2019, IEC 60317-23, winding wires, class 180, solderability, solder bath temperature, immersion time.
Frequently Asked Questions
SIST EN 60317-23:2014/A1:2019 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)". This standard covers: This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is: – Grade 1: 0,020 mm up to and including 1,600 mm; – Grade 2: 0,020 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.
This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is: – Grade 1: 0,020 mm up to and including 1,600 mm; – Grade 2: 0,020 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.
SIST EN 60317-23:2014/A1:2019 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires; 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60317-23:2014/A1:2019 has the following relationships with other standards: It is inter standard links to SIST EN 60317-23:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60317-23:2014/A1:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2019
Specifikacije za posebne vrste navijalnih žic - 23. del: Spajkljiva okrogla bakrena
žica, prevlečena s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-
23:2013/A1:2019)
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide
enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 23:
Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyesterimid, Klasse 180 (IEC
60317-23:2013/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Partie 23: Fil brasable de
section circulaire en cuivre émaillé avec polyesterimide, classe 180 (IEC 60317-
23:2013/A1:2019)
Ta slovenski standard je istoveten z: EN 60317-23:2014/A1:2019
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60317-23:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 23:
Solderable polyesterimide enamelled round copper wire, class 180
(IEC 60317-23:2013/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 23: Fil brasable de section circulaire en cuivre Wickeldrähten - Teil 23: Runddrähte aus Kupfer,
émaillé avec polyestérimide, classe 180 verzinnbar, lackisoliert mit Polyesterimid, Klasse 180
(IEC 60317-23:2013/A1:2019) (IEC 60317-23:2013/A1:2019)
This amendment A1 modifies the European Standard EN 60317-23:2014; it was approved by CENELEC on 2019-07-17. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-23:2014/A1:2019 E
SIST EN 60317-23:2014/A1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...