Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminum wire (IEC 60317-27-4:2020)

This part of IEC 60317 specifies the requirements of paper tape covered rectangular aluminium
winding wires. This covering consists of two or more layers of paper tape and is primarily
intended for winding coils for oil immersed transformers.
The range of nominal conductor dimensions covered by this document is:
– width: min. 2,00 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.
The paper tapes included in this document are restricted to those specified in IEC 60554-1 and
IEC 60554-3-5.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-4: Flachdrähte aus Aluminium, papierisoliert (IEC 60317-27-4:2020)

Spécifications pour types particuliers de fils de bobinage - Partie 27-4: Fil de section rectangulaire en aluminium recouvert de ruban papier (IEC 60317-27-4:2020)

IEC 60317-27-4: 2020 spécifie les exigences relatives aux fils de bobinage de section rectangulaire en aluminium recouverts de ruban papier. Ce revêtement est constitué d'au moins deux couches de ruban papier et est essentiellement destiné au bobinage pour les transformateurs immergés dans l'huile.
La gamme des dimensions nominales des conducteurs couvertes par le présent document est:
– largeur: min. 2,00 mm max. 16,0 mm;
– épaisseur: min. 0,80 mm max. 5,60 mm.
Les rubans papier concernés par le présent document sont limités à ceux qui sont spécifiés dans l’IEC 60554-1 et l’IEC 60554-3-5.

Specifikacije za posebne vrste navijalnih žic - 27-4. del: S papirnim trakom ovita pravokotna aluminijasta žica (IEC 60317-27-4:2020)

General Information

Status
Published
Publication Date
16-Aug-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Aug-2020
Due Date
17-Oct-2020
Completion Date
17-Aug-2020

Buy Standard

Standard
EN IEC 60317-27-4:2020
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60317-27-4:2020
01-oktober-2020
Specifikacije za posebne vrste navijalnih žic - 27-4. del: S papirnim trakom ovita
pravokotna aluminijasta žica (IEC 60317-27-4:2020)
Specifications for particular types of winding wires - Part 27-4: Paper tape covered
rectangular aluminum wire (IEC 60317-27-4:2020)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-4:
Flachdrähte aus Aluminium, papierisoliert (IEC 60317-27-4:2020)
Spécifications pour types particuliers de fils de bobinage - Partie 27-4: Fil de section
rectangulaire en aluminium recouvert de ruban papier (IEC 60317-27-4:2020)
Ta slovenski standard je istoveten z: EN IEC 60317-27-4:2020
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
SIST EN IEC 60317-27-4:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60317-27-4:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 60317-27-4:2020


EUROPEAN STANDARD EN IEC 60317-27-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2020
ICS 29.060.10

English Version
Specifications for particular types of winding wires - Part 27-4:
Paper tape covered rectangular aluminium wire
(IEC 60317-27-4:2020)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 27-4: Fil de section rectangulaire en aluminium Wickeldrähten - Teil 27-4: Flachdrähte aus Aluminium,
recouvert de ruban papier papierisoliert
(IEC 60317-27-4:2020) (IEC 60317-27-4:2020)
This European Standard was approved by CENELEC on 2020-07-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60317-27-4:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60317-27-4:2020
EN IEC 60317-27-4:2020 (E)
European foreword
The text of document 55/1837/FDIS, future edition 1 of IEC 60317-27-4, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60317-27-4:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-01
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60317-27-4:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60264 (series) NOTE Harmonized as EN 60264 (series)
IEC 60317 (series) NOTE Harmonized as EN 60317 (series)
IEC 60317-0-6:2020 NOTE Harmonized as EN IEC 60317-0-6:2020 (not modified)
IEC 60851 (series) NOTE Harmonized as EN 60851 (series)


2

---------------------- Page: 4 ----------------------
SIST EN IEC 60317-27-4:2020
EN IEC 60317-27-4:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60317-0-9 2015 Specifications for particular types of winding EN 60317-0-9 2015
wires - Part 0-9: General requirements -
Enamelled rectangular aluminium wire
IEC 60554-1 - Specification for cellulosic papers for electrical - -
purposes. Part 1: Definitions and general
requirements
IEC 60554-3-5 - Specification for cellulosic papers for electrical - -
purposes. Part 3: Specifications for individual
materials. Sheet 5: Special papers

3

---------------------- Page: 5 ----------------------
SIST EN IEC 60317-27-4:2020

---------------------- Page: 6 ----------------------
SIST EN IEC 60317-27-4:2020



IEC 60317-27-4

®


Edition 1.0 2020-05




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Specifications for particular types of winding wires –

Part 27-4: Paper tape covered rectangular aluminium wire



Spécifications pour types particuliers de fils de bobinage –

Partie 27-4: Fil de section rectangulaire en aluminium recouvert de ruban papier
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.060.10 ISBN 978-2-8322-8417-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 60317-27-4:2020
– 2 – IEC 60317-27-4:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 7
3.2.1 Methods of test . 7
3.2.2 Winding wire . 7
3.3 Appearance . 7
4 Dimensions. 7
4.1 Conductor dimensions . 7
4.2 Tolerance on conductor dimensions . 7
4.3 Rounding of corners . 7
4.4 Increase in dimensions due to paper tape covering . 7
4.5 Maximum overall dimensions . 8
5 Electrical resistance . 8
6 Elongation . 8
7 Springiness . 8
8 Flexibility and adherence . 8
9 Heat shock . 8
10 Cut-through . 8
11 Resistance to abrasion . 8
12 Resistance to solvents . 9
13 Breakdown voltage . 9
14 Continuity of insulation . 9
15 Temperature index . 9
16 Resistance to refrigerants . 9
17 Solderability . 9
18 Heat or solvent bonding . 9
19 Dielectric dissipation factor . 9
20 Resistance to hydrolysis and to transformer oil . 9
21 Loss of mass . 9
23 Pin hole test . 9
30 Packaging . 9
Bibliography . 11

Table 1 – Increase in dimensions . 8

---------------------- Page: 8 ----------------------
SIST EN IEC 60317-27-4:2020
IEC 60317-27-4:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –

Part 27-4: Paper tape covered rectangular aluminium wire

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical R
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.