SIST-TS ETSI/TS 102 657 V2.3.1:2024
(Main)Lawful Interception (LI) - Retained data handling - Handover interface for the request and delivery of retained data
Lawful Interception (LI) - Retained data handling - Handover interface for the request and delivery of retained data
The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.
Zakonito prestrezanje (LI) - Ravnanje z zadržanimi podatki - Izročilni vmesnik za zahtevo in izročanje zadržanih podatkov
Ta dokument temelji na zahtevah standarda ETSI TS 102 656 [2].
Ta dokument zajema izročilne zahteve in izročilno specifikacijo za podatke, ki jih obravnavajo nacionalni zakoni o zadržanih podatkih.
Ta dokument obravnava zahtevanje zadržanih podatkov in izročanje rezultatov.
Ta dokument določa elektronski vmesnik. Informativni dodatek opisuje, kako se lahko ta vmesnik prilagodi za ročne postopke. Ročni postopki v tem dokumentu niso obravnavani, razen v dodatku I.
General Information
Standards Content (Sample)
TECHNICAL SPECIFICATION
Lawful Interception (LI);
Retained data handling;
Handover interface for the request and
delivery of retained data
2 ETSI TS 102 657 V2.3.1 (2024-03)
Reference
RTS/LI-00256
Keywords
handover, retention
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
of merchantability or fitness
and/or governmental rule and/or regulation and further, no representation or warranty is made
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 ETSI TS 102 657 V2.3.1 (2024-03)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 13
3 Definition of terms, symbols and abbreviations . 13
3.1 Terms . 13
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Overview of handover interface . 17
4.1 Reference model . 17
4.2 Structure of document and applicable communication domains . 18
4.3 Categories of retained data . 19
4.4 Handover Interface port 1 (HI-A) and Handover Interface port 2 (HI-B) . 20
4.5 Model used for the RDHI . 20
5 Handover interface message flows . 20
5.1 Overview . 20
5.1.1 Summary of this clause . 20
5.1.2 Message flow modes . 21
5.1.3 Delivery cases . 21
5.1.4 "Active" requests and "closed" requests . 21
5.1.5 Errors and failure situations . 21
5.1.5.1 Error and failure types . 21
5.1.5.2 Request process failure feedback . 22
5.1.5.3 Other errors . 22
5.1.5.4 Missing messages . 22
5.1.6 Cancelling a request . 23
5.1.7 Delivery of results . 23
5.1.8 State diagram . 24
5.1.9 Supplementary Messages . 25
5.2 Message flows for general situation . 25
5.2.1 Delivery of a response . 25
5.2.2 Cancellation of request . 26
5.2.3 Multi-part delivery . 27
5.3 Message flows for Authorized-Organization-initiated scenario . 28
5.3.1 Delivery of results or a failure response . 28
5.3.2 Cancellation of request . 29
5.3.3 Multi-part delivery . 29
5.4 Message types for HI-A and HI-B . 31
5.5 HI-A and HI-B addressing. 32
6 Definition of the elements for retained data messages . 32
6.1 Header information. 32
6.1.1 Use of header information . 32
6.1.2 RequestID field specification . 32
6.1.3 CSP Identifiers . 33
6.1.3.1 Use of CSP Identifiers (CSPID) . 33
6.1.3.2 Third Party CSP Identifier (thirdPartyCSPID) . 33
6.1.4 Timestamp (timeStamp) . 33
6.1.5 RequestType (requestType) . 33
6.1.6 RequestFlag (requestFlag) . 33
6.2 Retained Data response . 33
ETSI
4 ETSI TS 102 657 V2.3.1 (2024-03)
6.2.1 General . 33
6.2.2 Additional information in response messages. 34
6.2.2.1 Record number (recordNumber) . 34
6.2.2.2 Response status (ResponseStatus) . 34
6.2.3 Volatile information . 34
6.2.4 Unavailable parameters . 34
6.3 Retained Data requests . 35
6.3.1 Information contained within a request . 35
6.3.2 Format of a request . 35
6.3.3 Additional information in requests . 36
6.3.3.1 Priority of a request . 36
6.3.3.2 Maximum hits . 36
6.3.3.3 Maximum records per batch . 36
6.3.3.4 Number of records limit . 37
6.4 Error messages . 37
7 Data exchange techniques . 37
7.1 General . 37
7.2 HTTP data exchange .
...
SLOVENSKI STANDARD
01-julij-2024
Zakonito prestrezanje (LI) - Ravnanje z zadržanimi podatki - Izročilni vmesnik za
zahtevo in izročanje zadržanih podatkov
Lawful Interception (LI) - Retained data handling - Handover interface for the request and
delivery of retained data
Ta slovenski standard je istoveten z: ETSI TS 102 657 V2.3.1 (2024-03)
ICS:
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
Lawful Interception (LI);
Retained data handling;
Handover interface for the request and
delivery of retained data
2 ETSI TS 102 657 V2.3.1 (2024-03)
Reference
RTS/LI-00256
Keywords
handover, retention
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
of merchantability or fitness
and/or governmental rule and/or regulation and further, no representation or warranty is made
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 ETSI TS 102 657 V2.3.1 (2024-03)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 13
3 Definition of terms, symbols and abbreviations . 13
3.1 Terms . 13
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Overview of handover interface . 17
4.1 Reference model . 17
4.2 Structure of document and applicable communication domains . 18
4.3 Categories of retained data . 19
4.4 Handover Interface port 1 (HI-A) and Handover Interface port 2 (HI-B) . 20
4.5 Model used for the RDHI . 20
5 Handover interface message flows . 20
5.1 Overview . 20
5.1.1 Summary of this clause . 20
5.1.2 Message flow modes . 21
5.1.3 Delivery cases . 21
5.1.4 "Active" requests and "closed" requests . 21
5.1.5 Errors and failure situations . 21
5.1.5.1 Error and failure types . 21
5.1.5.2 Request process failure feedback . 22
5.1.5.3 Other errors . 22
5.1.5.4 Missing messages . 22
5.1.6 Cancelling a request . 23
5.1.7 Delivery of results . 23
5.1.8 State diagram . 24
5.1.9 Supplementary Messages . 25
5.2 Message flows for general situation . 25
5.2.1 Delivery of a response . 25
5.2.2 Cancellation of request . 26
5.2.3 Multi-part delivery . 27
5.3 Message flows for Authorized-Organization-initiated scenario . 28
5.3.1 Delivery of results or a failure response . 28
5.3.2 Cancellation of request . 29
5.3.3 Multi-part delivery . 29
5.4 Message types for HI-A and HI-B . 31
5.5 HI-A and HI-B addressing. 32
6 Definition of the elements for retained data messages . 32
6.1 Header information. 32
6.1.1 Use of header information . 32
6.1.2 RequestID field specification . 32
6.1.3 CSP Identifiers . 33
6.1.3.1 Use of CSP Identifiers (CSPID) . 33
6.1.3.2 Third Party CSP Identifier (thirdPartyCSPID) . 33
6.1.4 Timestamp (timeStamp) . 33
6.1.5 RequestType (requestType) . 33
6.1.6 RequestFlag (requestFlag) . 33
6.2 Retained Data response . 33
ETSI
4 ETSI TS 102 657 V2.3.1 (2024-03)
6.2.1 General . 33
6.2.2 Additional information in response messages. 34
6.2.2.1 Record number (recordNumber) . 34
6.2.2.2 Response status (ResponseStatus) . 34
6.2.3 Volatile information . 34
6.2.4 Unavailable parameters . 34
6.3 Retained Data requests . 35
6.3.1 Information contained within a request . 35
6.3.2 Format of a request . 35
6.3.3 Additional information in requests . 36
6.3.3.1 Priority of a request . 36
6.3.3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.