SIST EN ISO 3262-10:2024
(Main)Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2024)
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2024)
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
Füllstoffe - Anforderungen und Prüfverfahren - Teil 10: Verwachsungen von natürlichem plättchenförmigen Talk und Chlorit (ISO 3262-10:2024)
Dieses Dokument legt Anforderungen und die entsprechenden Prüfverfahren für Produkte aus natürlich vorkommendem Talk/Chlorit in Plättchenform fest.
Matières de charge - Spécifications et méthodes d'essai - Partie 10: Mélange talc/chlorite naturel sous forme lamellair (ISO 3262-10:2024)
Le présent document spécifie les exigences et les méthodes d’essai correspondantes pour les produits préparés à partir de talc et de chlorite d’origine naturelle sous forme lamellaire.
Polnila - Specifikacije in preskusne metode - 10. del: Naravni talk/klorit v obliki lamel (ISO 3262-10:2024)
Ta dokument določa zahteve in ustrezne preskusne metode za proizvode iz naravnega talka/klorita v obliki lamel.
General Information
Relations
Overview
SIST EN ISO 3262-10:2024, titled "Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form," is a European and international standard developed by CEN and ISO Technical Committees. It specifies the essential requirements and test methods for products made from naturally occurring talc and chlorite in lamellar (flake-like) form. This updated second edition supersedes the previous 2000 version, incorporating technical revisions and aligned terminology to ensure consistency in the characterization of natural talc/chlorite extenders.
The standard aims to provide a clear framework for assessing the quality, composition, and safety of talc/chlorite fillers widely used in various industrial applications, minimizing variability and ensuring product conformity. It is applicable across multiple European countries and globally, facilitating trade and quality assurance in pigment and extender materials.
Key Topics
- Mineralogical Grades: Defines four grades (A, B, C, D) based on talc and chlorite content percentages.
- Essential Requirements:
- Talc content ranging from 0% to 100% depending on grade
- Chlorite content from 0% up to 100% by mass
- Loss on ignition (range varies per grade)
- Matter volatile at 105 °C (max 0.5%)
- Matter soluble in water (max 0.2%)
- pH range of aqueous suspension (8 to 10)
- Maximum quartz content (0.5%)
- Asbestos detection using a combination of X-ray diffraction (XRD) and electron microscopy methods (SEM/EDX or TEM) to ensure safety
- Conditional Requirements (to be agreed between parties):
- Residue on 45 µm sieve
- Particle size distribution using laser diffraction (ISO 8130-13)
- Matter soluble in hydrochloric acid
- Colour and lightness (tristimulus value Y)
- Resistivity of aqueous extracts
- Test Methods: Standardized procedures such as ISO 787 series for volatility, solubility, pH, resistivity; ISO 8130-13 for particle size; ISO 14966 and microscopy techniques for asbestos detection.
Applications
Natural talc/chlorite in lamellar form extenders are critical in enhancing the physical and chemical properties of products across industries:
- Paints and Coatings: Used as fillers and extenders to improve opacity, durability, and surface smoothness.
- Plastics and Polymers: Enhance mechanical strength and thermal stability while reducing cost.
- Rubber Compounds: Act as reinforcing agents to improve wear resistance and flexibility.
- Paper Manufacturing: Improve brightness, smoothness, and printability.
- Cosmetics and Pharmaceuticals: Natural, safe extenders enhance texture and consistency.
- Construction Materials: Used in cement and plaster formulations to improve workability and finish.
This standard ensures consistent quality control, safety, and compliance, especially regarding asbestos content, crucial for protecting health and meeting regulatory requirements.
Related Standards
- ISO 3262-1: Introduction and general test methods for extenders
- ISO 3262-2:2023: Specifications and test methods for baryte (natural barium sulfate)
- ISO 787 series: General test methods for pigments and extenders (volatility, solubility, pH, resistivity)
- ISO 8130-13: Particle size analysis for coatings by laser diffraction
- ISO 14966: Detection of inorganic fibrous particles using scanning electron microscopy
- ISO 18451-1: Terminology related to pigments, dyestuffs, and extenders
These interconnected standards provide a comprehensive framework for specifying and testing various extenders, supporting uniformity in industrial practices and regulatory compliance.
SIST EN ISO 3262-10:2024 is essential for manufacturers, quality control laboratories, regulatory authorities, and users of talc/chlorite extenders, enabling efficient product specification, testing, and certification. This harmonized standard promotes safety, quality, and interoperability in products involving natural mineral extenders worldwide.
Frequently Asked Questions
SIST EN ISO 3262-10:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2024)". This standard covers: This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
SIST EN ISO 3262-10:2024 is classified under the following ICS (International Classification for Standards) categories: 87.060.10 - Pigments and extenders. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 3262-10:2024 has the following relationships with other standards: It is inter standard links to SIST EN ISO 3262-10:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 3262-10:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2024
Nadomešča:
SIST EN ISO 3262-10:2001
Polnila - Specifikacije in preskusne metode - 10. del: Naravni talk/klorit v obliki
lamel (ISO 3262-10:2024)
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar
form (ISO 3262-10:2024)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 10: Verwachsungen von natürlichem
plättchenförmigen Talk und Chlorit (ISO 3262-10:2024)
Matières de charge - Spécifications et méthodes d'essai - Partie 10: Mélange talc/chlorite
naturel sous forme lamellair (ISO 3262-10:2024)
Ta slovenski standard je istoveten z: EN ISO 3262-10:2024
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 3262-10
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN ISO 3262-10:2000
English Version
Extenders - Specifications and methods of test - Part 10:
Natural talc/chlorite in lamellar form (ISO 3262-10:2024)
Matières de charge - Spécifications et méthodes d'essai Füllstoffe - Anforderungen und Prüfverfahren - Teil 10:
- Partie 10: Mélange talc/chlorite naturel sous forme Verwachsungen von natürlichem plättchenförmigen
lamellair (ISO 3262-10:2024) Talk und Chlorit (ISO 3262-10:2024)
This European Standard was approved by CEN on 7 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3262-10:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 3262-10:2024) has been prepared by Technical Committee ISO/TC 256
"Pigments, dyestuffs and extenders" in collaboration with Technical Committee CEN/TC 298 “Pigments
and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3262-10:2000.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3262-10:2024 has been approved by CEN as EN ISO 3262-10:2024 without any
modification.
International
Standard
ISO 3262-10
Second edition
Extenders — Specifications and
2024-01
methods of test —
Part 10:
Natural talc/chlorite in lamellar
form
Matières de charge — Spécifications et méthodes d'essai —
Partie 10: Mélange talc/chlorite naturel sous forme lamellaire
Reference number
ISO 3262-10:2024(en) © ISO 2024
ISO 3262-10:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 3262-10:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and test methods . 2
5 Test report . 4
iii
ISO 3262-10:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This docum
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...