SIST EN 28662-2:2000/A2:2002

SLOVENSKI STANDARD
01-januar-2002
Hand-held portable power tools - Measurement of vibrations at the handle - Part 2:
Chipping hammers and riveting hammers (ISO 8662-2:1992/AMD 1:1999)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 2:
Chipping hammers and riveting hammers (ISO 8662-2:1992/AM 1:1999)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 2: Meißelhämmer und Niethämmer (ISO 8662-2:1992/AM 1:1999)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
2: Marteaux burineurs et marteaux riveurs (ISO 8662-2:1992/AM 1:1999)
Ta slovenski standard je istoveten z: EN 28662-2:1994/A2:2001
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 28662-2:1994/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2001
ICS 13.160; 25.140.10
English version
Hand-held portable power tools - Measurement of vibrations at
the handle - Part 2: Chipping hammers and riveting hammers
(ISO 8662-2:1992/AM 1:1999)
Machines à moteur portatives - Measurage des vibrations Handgehaltene motorbetriebene Maschinen - Messung
au niveau des poignées - Partie 2: Marteaux burineurs et mechanischer Schwingungen am Handgriff - Teil 2:
marteaux riveurs (ISO 8662-2:1992/AM 1:1999) Meißelhämmer and Niethämmer (ISO 8662-2:1992/AM
1:1999)
This amendment A2 modifies the European Standard EN 28662-2:1994; it was approved by CEN on 8 March 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 28662-2:1994/A2:2001 E
worldwide for CEN national Members.

Page 2
Foreword
The text of this Amendment EN 28662-2:1994/A2:2001 to the EN 28662-2:1994 from Technical
Committee ISO/TC 118 "Compressors" of the International Organization for Standardization (ISO) has
been taken over as an Amendment to the European Standard by Technical Committee CEN/TC 231
"Mechanical vibration and shock", the secretariat of which is held by DIN.
This Amendment to the European Standard EN 28662-
...