iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 9239-1:2024

(Main)

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO/DIS 9239-1:2024)

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO/DIS 9239-1:2024)

This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required.
This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in Annex B.

Prüfungen zum Brandverhalten von Bodenbelägen - Teil 1: Bestimmung des Brandverhaltens bei Beanspruchung mit einem Wärmestrahler (ISO/DIS 9239-1:2024)

Essais de réaction au feu des revêtements de sol - Partie 1: Détermination du comportement au feu à l'aide d'une source de chaleur rayonnante (ISO/DIS 9239-1:2024)

Preskusi odziva talnih oblog na ogenj - 1. del: Ugotavljanje obnašanja pri gorenju z uporabo sevalnega vira toplote (ISO/DIS 9239-1:2024)

General Information

Status
Not Published
Public Enquiry End Date
30-May-2024
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
97.150 - Floor coverings
Technical Committee
POZ - Požarna varnost
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
10-Apr-2024
Due Date
28-Aug-2024
Ref Project
prEN ISO 9239-1 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO/DIS 9239‑1:2024)

Relations

Revised
SIST EN ISO 9239-1:2010 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
Effective Date
18-Jan-2023

Buy Standard

prEN ISO 9239-1:2024prEN ISO 9239-1:2024
PreviousNext
Draft
prEN ISO 9239-1:2024
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 9239-1:2024
01-maj-2024
Preskusi odziva talnih oblog na ogenj - 1. del: Ugotavljanje obnašanja pri gorenju
z uporabo sevalnega vira toplote (ISO/DIS 9239-1:2024)
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using
a radiant heat source (ISO/DIS 9239-1:2024)
Prüfungen zum Brandverhalten von Bodenbelägen - Teil 1: Bestimmung des
Brandverhaltens bei Beanspruchung mit einem Wärmestrahler (ISO/DIS 9239-1:2024)
Essais de réaction au feu des revêtements de sol - Partie 1: Détermination du
comportement au feu à l'aide d'une source de chaleur rayonnante (ISO/DIS 9239-
1:2024)
Ta slovenski standard je istoveten z: prEN ISO 9239-1
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
97.150 Talne obloge Floor coverings
oSIST prEN ISO 9239-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9239-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9239-1:2024
DRAFT
International
Standard
ISO/DIS 9239-1
ISO/TC 92/SC 1
Reaction to fire tests for floorings —
Secretariat: BSI
Part 1:
Voting begins on:
Determination of the burning 2024-03-27
behaviour using a radiant heat
Voting terminates on:
2024-06-19
source
Essais de réaction au feu des revêtements de sol —
Partie 1: Détermination du comportement au feu à l'aide d'une
source de chaleur rayonnante
ICS: 13.220.40; 97.150
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 9239-1:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9239-1:2024
DRAFT
ISO/DIS 9239-1:2024(en)
International
Standard
ISO/DIS 9239-1
ISO/TC 92/SC 1
Reaction to fire tests for floorings —
Secretariat: BSI
Part 1:
Voting begins on:
Determination of the burning
behaviour using a radiant heat
Voting terminates on:
source
Essais de réaction au feu des revêtements de sol —
Partie 1: Détermination du comportement au feu à l'aide d'une
source de chaleur rayonnante
ICS: 13.220.40; 97.150
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 9239-1:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9239-1:2024
ISO/DIS 9239-1:2024(en)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 9239-1:2010(Main)
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
EN ISO 9239-1:2010

This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required. This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results. This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions. Information on the precision of the test method is given in Annex B.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 6925:1998(Main)
Textile floor coverings -- Burning behaviour -- Tablet test at ambient temperature
ISO 6925:1982

The method established applies to all types of textile floor coverings independent of their construction or their fibre composition. The method may also be applicable to unfinished material. In this case, the result does not indicate the behaviour of the material in the condition in which is used.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
SIST
SIST ISO 9239-2:2002:2011
Reaction to fire tests for floorings -- Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
ISO 9239-2:2002

ISO 9239-2 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover).
This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

  • Standard
    20 pages
    English language
    sale 15% off
SIST
SIST ISO 9239-1:2011
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a radiant heat source
ISO 9239-1:2010

ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.  
This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
SIST
SIST EN ISO 9239-1:2010(Main)
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
EN ISO 9239-1:2010

This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required. This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results. This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions. Information on the precision of the test method is given in Annex B.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1399:1999(Main)
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
EN 1399:1997

This European Standard specifies two methods, for determining the resistance of resilient floor coverings to stubbed and burning cigarettes.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1399:1999/AC:1999(Amendment)
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
EN 1399:1997/AC:1998

TC - Corrections to references

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 6925:1998(Main)
Textile floor coverings -- Burning behaviour -- Tablet test at ambient temperature
ISO 6925:1982

The method established applies to all types of textile floor coverings independent of their construction or their fibre composition. The method may also be applicable to unfinished material. In this case, the result does not indicate the behaviour of the material in the condition in which is used.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
SIST
SIST ISO 9239-2:2002:2011
Reaction to fire tests for floorings -- Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
ISO 9239-2:2002

ISO 9239-2 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover).
This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

  • Standard
    20 pages
    English language
    sale 15% off
SIST
SIST ISO 9239-1:2011
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a radiant heat source
ISO 9239-1:2010

ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.  
This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off