iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12276:2000

(Main)

Mountaineering equipment - Frictional anchors - Safety requirements and test methods

Mountaineering equipment - Frictional anchors - Safety requirements and test methods

This standard specifies safety requirements and test methods for frictional anchors for use in mountaineering including climbing.

Bergsteigerausrüstung - Klemmgeräte - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Klemmgeräte fest, die beim Bergsteigen einschließlich Klettern verwendet werden.

Equipement d'alpinisme et d'escalade - Coinceurs mécaniques - Exigences de sécurité et méthodes d'essai

La présente norme spécifie des exigences de sécurité et des méthodes d'essai pour les coinceurs mécaniques utilisés en alpinisme et en escalade.

Gorniška oprema – Torna sidra (metulji) – Varnostne zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
30-Jun-2000
Withdrawal Date
19-Nov-2013
ICS
97.220.40 - Outdoor and water sports equipment
Technical Committee
SPO - Sports
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Nov-2013
Due Date
13-Dec-2013
Completion Date
20-Nov-2013
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
EN 12276:1998 - Mountaineering equipment - Frictional anchors - Safety requirements and test methods

Relations

Corrected By
SIST EN 12276:2000/AC:2002 - Mountaineering equipment - Frictional anchors - Safety requirements and test methods
Effective Date
22-Dec-2008
Replaced By
SIST EN 12276:2013 - Mountaineering equipment - Frictional anchors - Safety requirements and test methods
Effective Date
01-Dec-2013
Corrected By
SIST EN 12276:2000/AC:2002 - Mountaineering equipment - Frictional anchors - Safety requirements and test methods
Effective Date
08-Jun-2022

Buy Standard

EN 12276:2000EN 12276:2000
PreviousNext
Standard
EN 12276:2000
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12276:2000
01-julij-2000
Gorniška oprema – Torna sidra (metulji) – Varnostne zahteve in preskusne
metode
Mountaineering equipment - Frictional anchors - Safety requirements and test methods
Bergsteigerausrüstung - Klemmgeräte - Sicherheitstechnische Anforderungen und
Prüfverfahren
Equipement d'alpinisme et d'escalade - Coinceurs mécaniques - E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13089:2011+A3:2023(Main + Amendment)
Mountaineering equipment - Ice-tools - Safety requirements and test methods
EN 13089:2011+A3:2023

This European Standard specifies safety requirements and test methods for ice-tools for use in mountaineering including climbing, and as a buried anchor for protection against falls.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 564:2023(Main)
Mountaineering equipment - Accessory cords - Safety requirements and test methods
EN 564:2023

This document specifies safety requirements and test methods for accessory cords, supplied on a drum or in separate lengths, for use in mountaineering including climbing.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 892:2012+A3:2023(Main + Amendment)
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
EN 892:2012+A3:2023

This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4210-2:2023(Main)
Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2023)
EN ISO 4210-2:2023

This document specifies safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies, and lays down guidelines for manufacturer’s instructions on the use and care of such bicycles.
This document applies to young adult bicycles with maximum saddle height of 635 mm or more and less than 750 mm, city and trekking bicycles, mountain bicycles, and racing bicycles that have a maximum saddle height of 635 mm or more including folding bicycles.
This document does not apply to specialized types of bicycle, such as delivery bicycles, recumbent bicycles, tandems, BMX bicycles, and bicycles designed and equipped for use in severe applications such as sanctioned competition events, stunting, or aerobatic manoeuvres.
NOTE      For bicycles with a maximum saddle height of 435 mm or less, see national regulations for ride-on toys, and with a maximum saddle height of more than 435 mm and less than 635 mm, see ISO 8098.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 926-2:2014+A1:2022(Main)
Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
EN 926-2:2013+A1:2021

This document specifies requirements and test methods for classifying the flight safety characteristics of
paragliders in terms of the demands on pilot flying skills.
This document is intended for the use of independent testing laboratories qualified for flight testing
paragliders.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17520:2022(Main)
Mountaineering equipment - Personal belay lanyards - Safety requirements and test methods
EN 17520:2021

This standard applies to lanyards intended to be the primary connection between the climber and the belay
stance.
NOTE: lanyards intended only for positioning are not covered by this standard (e.g. daisy chain).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12491:2016+A1:2022(Main)
Paragliding equipment - Emergency parachutes - Safety requirements and test methods
EN 12491:2015+A1:2021

This European Standard is applicable to emergency parachutes deployed by the action of the pilot without any other assistance (mechanical or pyrotechnic), intended for use with single seater or two seater paragliders.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1651:2018+A1:2020(Main)
Paragliding equipment - Harnesses - Safety requirements and strength tests
EN 1651:2018+A1:2020

EN 1651+A1 is applicable only to harnesses for paragliders. The intermediate attachment system between the harness and the paraglider does not form part of this standard.This Standard specifies safety requirements and test methods.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21853:2020(Main)
Kite boarding - Release system - Safety requirements and test methods (ISO 21853:2020)
EN ISO 21853:2020

This International Standard specifies the minimum safety requirement and test methods for the safety release system that reduces the pulling force in the kite and disconnects the user from the kite.
This International Standard is applicable for safety release systems which are operated intentionally by the user or another person and are used for the sport of kite boarding.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17232:2020(Main)
Water play equipment and features - Safety requirements, test methods and operational requirements
EN 17232:2020

This standard specifies safety requirements, test methods and operational requirements for non-floating water play equipment, features and structures in areas intended for water activities for public use (non-domestic). Water is an integral part in the use of the play equipment/feature/structures covered in this standard.
The purpose of this standard is to ensure a proper level of safety when playing in, on or around water play equipment/feature(s), and at the same time to promote activities and features known to benefit children because they provide valuable experiences that will enable them to cope with situations outside the water play equipment/feature(s).
This standard also applies for spray parks.
The following are excluded:
a)   floating leisure articles according to EN ISO 25649;
b)   artificial climbing walls according to EN 12572;
c)   toys according to EN 71;
d)   Water slides according to EN 1069;
e)   climbing walls used in the swimming pool surround according to prEN 17164.
f)   Water equipment/features (e.g. fountains) not intended for playing.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day