SIST EN 61290-1:2015

SLOVENSKI STANDARD
SIST EN 61290-1:2015
01-oktober-2015
2SWLþQLRMDþHYDOQLNL3UHVNXVQHPHWRGHGHO3DUDPHWULPRþLLQRMDþHQMD,(&

Optical amplifiers - Test methods - Part 1: Optical power and gain parameters (IEC
61290-1:2014)
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1: Optische Leistungs- und
Verstärkungsparameter (IEC 61290-1:2014)
Amplificateurs optiques - Méthodes d'essai - Partie 1: Paramètres de puissance et de
gain (IEC 61290-1:2014)
Ta slovenski standard je istoveten z: EN 61290-1:2015
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
SIST EN 61290-1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61290-1:2015

---------------------- Page: 2 ----------------------

SIST EN 61290-1:2015


EUROPEAN STANDARD EN 61290-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 33.180.30

English Version
Optical amplifiers - Test methods -
Part 1: Power and gain parameters
(IEC 61290-1:2014)
Amplificateurs optiques - Méthodes d'essai -  Prüfverfahren für Lichtwellenleiter-Verstärker -
Partie 1: Paramètres de puissance et de gain Teil 1: Optische Leistungs- und Verstärkungsparameter
(IEC 61290-1:2014) (IEC 61290-1:2014)
This European Standard was approved by CENELEC on 2015-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61290-1:2015 E

---------------------- Page: 3 ----------------------

SIST EN 61290-1:2015
EN 61290-1:2015 - 2 -
Foreword
The text of document 86C/1188/CDV, future edition 1 of IEC 61290-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61290-1:2015.
The following dates are fixed:
(dop) 2015-10-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-01-20
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61290-1:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1.
IEC 60793-1-40 NOTE Harmonized as EN 60793-1-40.
IEC 60825-1 NOTE Harmonized as EN 60825-1.
IEC 60825-2 NOTE Harmonized as EN 60825-2.
IEC 60874-1 NOTE Harmonized as EN 60874-1.
IEC 61290-10 NOTE Harmonized as EN 61290-10 series (not modified).

---------------------- Page: 4 ----------------------

SIST EN 61290-1:2015
- 3 - EN 61290-1:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61290-1-1 -  Optical amplifiers - Test methods - EN 61290-1-1 -
Part 1-1: Power and gain parameters -
Optical spectrum analyzer method
IEC 61290-1-2 -  Optical amplifiers - Test methods - EN 61290-1-2 -
Part 1-2: Power and gain parameters -
Electrical spectrum analyzer method
IEC 61290-1-3 -  Optical amplifiers - Test methods - EN 61290-1-3 -
Part 1-3: Power and gain parameters -
Optical power meter method
IEC 61291-1 2012 Optical amplifiers - EN 61291-1 2012
Part 1: Generic specification

---------------------- Page: 5 ----------------------

SIST EN 61290-1:2015

---------------------- Page: 6 ----------------------

SIST EN 61290-1:2015



IEC 61290-1

®


Edition 1.0 2014-12




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Optical amplifiers – Test methods –

Part 1: Power and gain parameters




Amplificateurs optiques – Méthodes d’essai –

Partie 1: Paramètres de puissance et de gain
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX N


ICS 33.180.30 ISBN 978-2-8322-1991-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61290-1:2015
– 2 – IEC 61290-1:2014  IEC 2014
CONTENTS
FOREWORD . 3
1 Scope and object . 5
2 Normative references . 5
3 Acronyms and abbreviations . 6
4 Optical power and gain test method . 6
5 Optical power and gain parameters . 6
6 Test results . 11
Bibliography . 14

Figure 1 – Typical behaviour of the gain as a function of the input signal power . 7
Figure 2 – Typical behaviour of the gain as a function of the wavelength . 7
Figure 3 – Typical behaviour of the gain as a function of the temperature . 8
Figure 4 – Typical behaviour of the gain as a function of the wavelength . 9
Figure 5 – Typical behaviour of the gain fluctuation as a function of time . 9
Figure 6 – Typical behaviour of the output power fluctuation as a function of time . 10
Figure 7 – Typical behaviour of the gain as a function of the input signal power . 11
Figure 8 – Typical behaviour of the output power as a function of the input signal
power . 11

---------------------- Page: 8 ----------------------

SIST EN 61290-1:2015
IEC 61290-1:2014  IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL AMPLIFIERS –
TEST METHODS –

Part 1: Power and gain parameters

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61290-1 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
CDV Report on voting
86C/1188/CDV 86C/1258/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

SIST EN 61290-1:2015
– 4 – IEC 61290-1:2014  IEC 2014
A list of all parts in the IEC 61290 series, published under the general title Optical amplifiers –
Test methods, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 61290-1:2015
IEC 61290-1:2014  IEC 2014 – 5 –
OPTICAL AMPLIFIERS –
TEST METHODS –

Part 1: Power and gain parameters


1 Scope and object
This part of 61290 applies to all commercially available optical amplifiers (OAs) and optically
amplified subsystems. It applies to OAs using optically pumped fibres (OFAs based on either
rare-earth doped fibres or on the Raman effect), semiconductors (SOAs), and waveguides
(POWAs).
NOTE 1 The applicability of the test methods described in the present standard to distributed Raman amplifiers is
still under study.
The object of this standard is to establish uniform requirements for accurate and reliable
measurements of the following OA parameters, as defined in Clause 3 of IEC 61291-1:2012:
a) nominal output signal power;
b) gain;
c) reverse gain;
d) maximum gain;
e) maximum gain wavelength;
f) maximum gain variation with temperature;
g) gain wavelength band;
h) gain wavelength variation;
i) gain stability;
j) polarization-dependent gain;
k) large-signal output stability;
l) saturation output power;
m) maximum output signal power;
n) maximum total output power.
NOTE 2 All numerical values followed by (‡).are suggested values for which the measurement is assured. Other
values are acceptable if verified.
The object of this standard is specifically directed to single-channel amplifiers. For
multichannel amplifiers, one should refer to the IEC 61290-10 series.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 61290-1-1, Optical amplifiers – Test methods – Part 1-1: Power and gain parameters –
Optical spectrum analyzer method
IEC 61290-1-2, Optical amplifiers – Test methods – Part 1-2: Power and gain parameters –
Electrical spectrum analyzer method

---------------------- Page: 11 ----------------------

SIST EN 61290-1:2015
– 6 – IEC 61290-1:2014  IEC 2014
IEC 61290-1-3, Optical amplifiers – Test methods – Part 1-3: Power and gain parameters –
Optical power meter method
IEC 61291-1:2012, Optical amplifiers – Part 1: Generic specification
3 Acronyms and abbreviations
ASE amplified spontaneous emission
OA optical amplifier
OFA optical fibre amplifier
SOA semiconductor optical amplifier
FWHM full width at half maximum
OSA optical spectrum analyzer
4 Optical power and gai
...