SIST EN 300 494-2 V1.3.1:2003
(Main)Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)
- Abstract
To be updated with relevant information derived from TBR022 which due to withdrawal after the full enforcement of the new R&TTE directive.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
- Mandate
- T-317
SIST EN 300 494-2 V1.3.1:2003 is the Slovenian adoption of ETSI EN 300 494-2 Version 1.3.1. It specifies profile-specific test procedures and reporting templates for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile (GAP) Portable radio Termination (PT) equipment. Engineers, test labs, and approval teams use it to check whether a PT implementation can be assessed against the GAP profile in a consistent way.
What does SIST EN 300 494-2 V1.3.1:2003 specify?
SIST EN 300 494-2 V1.3.1:2003 specifies the test specification for DECT GAP Portable Part (PP) applications, with the goal of approval testing for air-interface inter-operability between equipment from different manufacturers in public, business, and residential environments.
The document is organized into clauses for scope, references, definitions and abbreviations, relevant test cases, and additional test cases. It also includes normative annexes for PIXIT, PCTR, SCTR, and SCS proformas, plus an informative bibliography.
| Annex | What it covers |
|---|---|
| Annex A | Profile Implementation eXtra Information for Testing (PIXIT) proforma |
| Annex B | Profile Conformance Test Report (PCTR) proforma |
| Annex C | System Conformance Test Report (SCTR) proforma |
| Annex D | System Conformance Statement (SCS) proforma |
| Annex E | Bibliography |
The scope states that ISO/IEC 9646 methodology is used as the basis for the conformance-testing approach, except for PHY layer testing, where a text description is used instead of the usual format.
What are the key requirements of SIST EN 300 494-2 V1.3.1:2003?
SIST EN 300 494-2 V1.3.1:2003 is mainly a conformance test specification. Its most important content is the test coverage by layer, the PHY layer measurement conditions, and the verdict criteria used to judge whether the PT behaves as required.
Network (NWK) layer coverage
Clause 4.1 defines a remote test suite for the PT IUT across Call Control (CC), Mobility Management (MM), Lower Layer Management Entity (LLME), and link control functions. The listed test groups cover outgoing and incoming call behavior, identity handling, authentication, location procedures, access rights, key allocation, ciphering, release, supplementary-service related behavior, invalid messages, and timer behavior.
In practice, this tells a test lab which signaling behaviors must be exercised and what kind of failures to look for, especially in call setup, authentication, and timer expiry.
Data Link Control (DLC) layer coverage
Clause 4.2 structures the DLC tests around C-plane services, Lb broadcast control, and U-plane Class 0 transmission. The test cases focus on link establishment, acknowledgement and retransmission behavior, invalid frames, broadcast reception, and U-plane frame transmission and reception.
In practice, this layer checks whether the PT handles frame exchange reliably enough for call signaling and user-plane data to work over the DECT link.
Medium Access Control (MAC) layer coverage
Clause 4.3 defines MAC test groups for downlink broadcast, paging, bearer setup, bearer handover, bearer release, connection-oriented data transfer, and LLME management. The test cases include both conformance-style checks and behavior tests for valid and invalid conditions.
In practice, this is the layer where the PT’s radio access behavior is checked, including how it responds to paging, bearer changes, and management timers.
PHY layer requirements
Clause 4.4 adds manufacturer declarations for selected GAP PHY features and then sets specific radio and receiver requirements. The Normal Transmitted Power (NTP) verdict requires more than 80 mW per simultaneously active transceiver at nominal and extreme temperatures. Other clauses set the receiver sensitivity condition, the intermodulation input level, and a user-controlled volume control check when adaptive volume control is not used.
In practice, these requirements link the test document to actual RF performance, so the laboratory has measurable power, sensitivity, and audio-related acceptance points.
Additional PHY test purposes and verdicts
Clause 5.2 adds GAP-specific PHY tests for receiver sensitivity tolerance against transmitter deviation variations, receiver timing tolerance, and transmission of the Z-field. The sensitivity and timing tests use BER-based verdicts, with a limit of 0,001. The Z-field test checks that the received X and Z fields match across 10 packets.
In practice, these tests confirm that the PT still performs correctly at the edges of timing and modulation tolerance, not only under ideal conditions.
What terms does SIST EN 300 494-2 V1.3.1:2003 define?
- Portable radio Termination (PT) - The portable DECT termination that is treated as the IUT in this specification.
- Implementation Under Test (IUT) - The device or implementation being tested against the GAP requirements.
- Profile Implementation eXtra Information for Testing (PIXIT) - Extra implementation information used to parameterize the tests.
- Profile Conformance Test Report (PCTR) - The report form used to record profile conformance testing results.
- System Conformance Test Report (SCTR) - The report form used to record conformance testing for the whole system under test.
- System Conformance Statement (SCS) - The statement form that identifies the system, protocols, profile, and test context.
- Generic Access Profile (GAP) - The DECT profile whose PT behavior is being tested.
Who uses SIST EN 300 494-2 V1.3.1:2003?
SIST EN 300 494-2 V1.3.1:2003 is used by DECT equipment manufacturers, conformance test laboratories, and approval or certification teams. It is also useful to quality managers and buyers who need to understand what kind of test evidence should exist for a GAP PT implementation.
In practice, users apply it when preparing PIXIT information, selecting and running test cases, completing PCTR/SCTR documents, and checking whether a PT can be assessed for inter-operability and protocol conformance.
Which standards are used with SIST EN 300 494-2 V1.3.1:2003?
- EN 300 444 - Defines DECT Generic Access Profile (GAP), which is the profile under test.
- EN 300 175-2, EN 300 175-3, EN 300 175-4, EN 300 175-5, EN 300 175-7 - Provide the DECT Common Interface layer specifications used by the test groups.
- ISO/IEC 9646-1, ISO/IEC 9646-5, ISO/IEC 9646-7 - Provide the conformance testing methodology, lab/client requirements, and Implementation Conformance Statements.
- EN 300 176-1 and EN 300 176-2 - Provide the DECT approval test specifications used for PHY-related testing.
- EN 300 497-2 to EN 300 497-9 - Provide the DECT Common Interface test case library from which the profile test cases are derived.
- ETS 300 474-1 - Provides the PT profile requirement list and profile-specific ICS proforma used for parameterization.
- EN 300 494-1 - The summary part of the GAP Profile Test Specification series.
- EN 300 494-3 - The companion part covering Fixed radio Termination (FT).
What does the SIST EN 300 494-2 V1.3.1:2003 document contain?
SIST EN 300 494-2 V1.3.1:2003 contains layer-by-layer test case lists for NWK, DLC, MAC, and PHY behavior, with test group structures and case indexes. It also contains the additional GAP-specific PHY procedures, including measurement methods and verdict criteria.
The annexes provide ready-to-use reporting forms for PIXIT, PCTR, SCTR, and SCS, which are useful in formal conformance campaigns. The document also includes tables of supported features and parameterization extracts that help a lab set up the test environment correctly.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 494-2 V1.3.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)". This standard covers: To be updated with relevant information derived from TBR022 which due to withdrawal after the full enforcement of the new R&TTE directive.
To be updated with relevant information derived from TBR022 which due to withdrawal after the full enforcement of the new R&TTE directive.
SIST EN 300 494-2 V1.3.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 494-2 V1.3.1:2003 is associated with the following European legislation: Standardization Mandates: T-317. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 494-2 V1.3.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.37Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 494-2 Version 1.3.1SIST EN 300 494-2 V1.3.1:2003en01-december-2003SIST EN 300 494-2 V1.3.1:2003SLOVENSKI
STANDARD
ETSIEN300494-2V1.3.1(2001-04)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part2:ProfileSpecificTestSpecification(PSTS)-PortableradioTermination(PT)SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)2ReferenceREN/DECT-040188-2KeywordsDECT,GAP,PTS,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)3ContentsIntellectualPropertyRights.6Foreword.61Scope.72References.73Definitionsandabbreviations.83.1Definitions.83.2Abbreviations.94Relevanttestcaseslist.94.1Network(NWK)layer.94.1.1TestSuiteStructure(TSS).104.1.2Testcaseindex.124.2DataLinkControl(DLC)layer.154.2.1Testsuitestructure.154.2.2Testcaseindex.164.3MediumAccessControl(MAC)layer.184.3.1Testsuitestructure.184.3.2Testcaseindex.194.4Physical(PHY)layer.194.4.1Manufacturerdeclarations.194.4.2NormalTransmittedPower(NTP).204.4.2.1VerdictcriteriaforIUTswithanintegralantenna.204.4.2.2VerdictcriteriaforIUTswithexternalantennaconnection(s).204.4.3PPradioreceiversensitivity.204.4.4Void.204.4.5Receiverintermodulationperformance.204.4.6Usercontrolledvolumecontrol.205Additionaltestcaseslist.205.1Testpurposes.205.1.1NWKlayer.205.1.2DLClayer.205.1.3MAClayer.215.1.4PHYlayer.215.2Testcases.215.2.1NWKlayer.215.2.2DLClayer.215.2.3MAClayer.215.2.4PHYlayer.215.2.4.1Receiversensitivitytoleranceoftransmitterdeviationvariations.215.2.4.1.1Definition.215.2.4.1.2Testenvironment.225.2.4.1.3Methodofmeasurement.225.2.4.1.4Verdictcriteria.225.2.4.2ReceivertimingtoleranceofaPT.225.2.4.2.1Definition.225.2.4.2.2Testenvironment.225.2.4.2.3Methodofmeasurement,Part1.235.2.4.2.4Methodofmeasurement,Part2.235.2.4.2.5Verdictcriteriaforpart1.235.2.4.2.6Verdictcriteriaforpart2.235.2.4.3TransmissionofZ-field.235.2.4.3.1Definition.245.2.4.3.2Testenvironment.245.2.4.3.3Methodofmeasurement.24SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)45.2.4.3.4Verdictcriteria.24AnnexA(normative):ProfileImplementationeXtraInformationforTesting(PIXIT)proforma.25A.1General.25A.2ProfileIXITRequirementsList(XRL).25A.2.1NWKlayerprotocol.25A.2.2DLClayerprotocol.25A.2.3MAClayerprotocol.25A.2.4PHYlayerprotocol.25A.3ProfilespecificIXIT.25A.3.1NWKlayer.25A.3.2DLClayer.25A.3.3MAClayer.26A.3.4PHYlayer.26A.3.5Configurationconstraints.26A.4Declarationoffeaturessupported.26A.4.1Networklayer.26AnnexB(normative):ProfileConformanceTestReport(PCTR)proforma.28B.1Identificationsummary.28B.1.1ProfileCTR.28B.1.2ImplementationUnderTest(IUT).29B.1.3Testingenvironment.29B.1.4Limitsandreservations.29B.1.5Comments.30B.2IUTconformancestatus.30B.3Staticconformancesummary.30B.4Dynamicconformancesummary.30B.5Staticconformancereviewreport.31B.6Testcampaignreport.31B.6.1NWKlayer.32B.6.2DLClayer.34B.6.3MAClayer.34B.6.4PHYlayer.35B.7Observations.35AnnexC(normative):SystemConformanceTestReport(SCTR)proforma.36C.1Identificationsummary.36C.1.1SystemConformanceTestReport(SCTR).36C.1.2Testlaboratory.36C.1.3Client.37C.1.4SystemUnderTest(SUT).37C.1.5Profile.38C.1.6Natureofconformancetesting.38C.1.7Limitsandreservations.38C.1.8Recordofagreement.39C.1.9Comments.39C.2Systemreportsummary.40C.2.1ProfiletestingsummaryforGAPNWKlayerPT.40C.2.2ProfiletestingsummaryforGAPDLClayerPT.41C.2.3ProfiletestingsummaryforGAPMAClayerPT.42C.2.4ProfiletestingsummaryforGAPPHYlayerPT.43SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)5AnnexD(normative):SystemConformanceStatement(SCS)proforma.44D.1Identificationsummary.44D.1.1SCSidentification.44D.1.2IUTidentification.44D.1.3Clientidentification.45D.1.4Supplieridentification.45D.1.5Manufactureridentification.46D.1.6Protocolsidentification.46D.1.7Profileidentification.46D.2Miscellaneoussysteminformation.47D.2.1Configuration.47D.2.2Otherinformation.47AnnexE(informative):Bibliography.48History.49SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)6IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).Thepresentdocumentispart2ofamulti-partdeliverablecoveringtheGenericAccessProfile(GAP),asidentifiedbelow:Part1:"Summary";Part2:"ProfileSpecificTestSpecification(PSTS)-PortableradioTermination(PT)";Part3:"ProfileSpecificTestSpecification(PSTS)-FixedradioTermination(FT)".NationaltranspositiondatesDateofadoptionofthisEN:13April2001DateoflatestannouncementofthisEN(doa):31July2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31January2002DateofwithdrawalofanyconflictingNationalStandard(dow):31January2002SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)71ScopeThepresentdocumentcontainsthetestspecificationforDigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)PortablePart(PP)applications.ThemainobjectiveoftheGAPtestspecificationistoprovideapprovaltestsgivingahighprobabilityofairinterfaceinter-operabilitybetweendifferentmanufacturer'sequipmentindifferentenvironments(i.e.public,businessandresidential).TheISOstandardforthemethodologyofconformancetestingISO/IEC9646parts1to7[8]to[10]isusedasthebasisforthetestmethodology,andasthebasisforthetestcasespecification.ThisisconsideredtobeunsuitableforPhysicallayertesting,andthereforeatextdescriptionisused.ThetestcaseslistedinthepresentdocumenthavebeenderivedfromtheDECTCommonInterface(CI)TestCaseLibrary(TCL)[13]to[21].InadditionasfarasthePhysicallayerisconcernedEN300176parts1[11]and2[25]apply.AdditionalGAPspecifictestcasesareincludedwhererequired.TheProfileIXITisbasedontheDECTCIPIXITsspecifiedinEN300497parts1to9[13]to[21].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300175-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part1:Overview".[2]ETSIEN300175-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part2:PhysicalLayer(PHL)".[3]ETSIEN300175-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part3:MediumAccessControl(MAC)layer".[4]ETSIEN300175-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part4:DataLinkControl(DLC)layer".[5]ETSIEN300175-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part5:Network(NWK)layer".[6]ETSIEN300175-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part7:Securityfeatures".[7]ETSIEN300444:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)".[8]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[9]ISO/IEC9646-5:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[10]ISO/IEC9646-7:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)8[11]ETSIEN300176-1:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part1:Radio".[12]ETSIEN300476,Parts1to7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma".[13]ETSIEN300497-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part1:TestSuiteStructure(TSS)andTestPurposes(TP)forMediumAccessControl(MAC)layer".[14]ETSIEN300497-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part2:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-PortableradioTermination(PT)".[15]ETSIEN300497-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part3:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-FixedradioTermination(FT)".[16]ETSIEN300497-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part4:TestSuiteStructure(TSS)andTestPurposes(TP)-DataLinkControl(DLC)layer".[17]ETSIEN300497-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part5:AbstractTestSuite(ATS)-DataLinkControl(DLC)layer".[18]ETSIEN300497-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part6:TestSuiteStructure(TSS)andTestPurposes(TP)-Network(NWK)layer-PortableradioTermination(PT)".[19]ETSIEN300497-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part7:AbstractTestSuite(ATS)forNetwork(NWK)layer-PortableradioTermination(PT)".[20]ETSIEN300497-8:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part8:TestSuiteStructure(TSS)andTestPurposes(TP)-Network(NWK)layer-FixedradioTermination(FT)".[21]ETSIEN300497-9:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part9:AbstractTestSuite(ATS)forNetwork(NWK)layer-FixedradioTermination(FT)".[22]ETSIETS300474-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part1:PortableradioTermination(PT)".[23]ETSIETS300474-2:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part2:FixedradioTermination(FT)".[24]ETSIEN300494-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part1:Summary".[25]ETSIEN300176-2:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part2:Speech".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsgiveninISO/IEC9646parts1to7[8]to[10],EN300175parts1to7[1]to[6],EN300444[7]apply.SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)93.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ACAuthenticationCodeATSAbstractTestSuiteBERBitErrorRateCCCallControlCICommonInterfaceDCKDerivedCipherKeyDLCDataLinkControlEUTEquipmentUnderTestFTFixedradioTerminationGAPGenericAccessProfileICSImplementationConformanceStatementIPUIInternationalPortableUserIdentityIUTImplementationUnderTestIXITImplementationeXtraInformationforTestingLCELinkControlEntityLLMELowerLayerManagementEntityLTLowerTesterMACMediumAccessControlMMMobilityManagementNLFNewLinkFlagNWKNetworkPARKPortableAccessRightsKeyPCTRProfileConformanceTestReportPHYPhysicalPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPTPortableradioTerminationPSTSProfileSpecificTestSpecificationPTSProfileTestSpecificationRFRadioFrequencyRFPRadioFixedPartSARISecondaryAccessRightsIdentitySCSSystemConformanceStatementSCTRSystemConformanceTestReportSUTSystemUnderTestTPUITemporaryPortableUserIdentityTSTestSystem4Relevanttestcaseslist4.1Network(NWK)layerThisclauseincludeslistsofthetestgroups,andabstracttestcasesrelevantforGAPProfileTestSpecification(PTS)-Network(NWK)layerPortableradioTermination(PT)derivedfromEN300497-7[19].NOTE:ReferenceswhennecessaryaregivenbasedontheparticulartestcasenameuniquethroughalltestspecificationEN300497[13]to[21].SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)104.1.1TestSuiteStructure(TSS)Table1TSSSuiteName:nwk_ptStandardsRef:EN300444[7];EN300497-7[19]ProfileICSRef:ETS300474-1[22]ProfileIXITRef:EN300494-2(thepresentdocument)TestMethod:remoteComments:TestGroupReferenceTestGroupObjectivePT/TocheckthebehaviouroftheNWKlayerofthePT(IUT)PT/CC/TochecktheIUTCC-statemachinebehaviourPT/CC/IT/TocheckthattheIUTCC-statemachineprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingPT/CC/CA/LimitedtestingthattheobservablecapabilitiesoftheCCentityoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITPT/CC/BV/TotesttheCCentityoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemPT/CC/BV/OC/TochecktheIUT'sbehaviourstosetupanoutgoingcallPT/CC/BV/IC/TochecktheIUT'sbehaviourstosetupanincomingcallPT/CC/BV/CI/TochecktheIUT'sbehaviourininformationtransferproceduresPT/CC/BV/CR/TochecktheIUT'sbehaviourstoreleaseanoutgoing/incomingcallPT/CC/BV/RS/TochecktheIUT'sbehaviourduringcallrelatedsupplementaryserviceproceduresPT/CC/BO/TocheckthebehaviouroftheCCentityoftheIUTinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomestatesoftheCCproceduresPT/CC/BI/TocheckthebehaviouroftheCCentityoftheIUTinresponsetoinvalidmessagesPT/CC/TI/ToverifythattheIUTCCtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerPT/MM/TocheckthebehaviouroftheMobilityManagement(MM)entityoftheIUTPT/MM/IT/TocheckthattheMMentityoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingPT/MM/CA/LimitedtestingthattheobservablecapabilitiesoftheMMentityoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITPT/MM/BV/TotesttheMMentityoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemPT/MM/BV/ID/TochecktheIUT'sbehaviourconcerningidentityproceduresPT/MM/BV/AU/TochecktheIUT'sbehaviourconcerningtheauthenticationproceduresPT/MM/BV/LO/TochecktheIUT'sbehaviourconcerningthelocationproceduresPT/MM/BV/AR/TochecktheIUT'sbehaviourconcerningtheaccessrightsproceduresPT/MM/BV/KA/TochecktheIUT'sbehaviourconcerningthekeyallocationprocedurePT/MM/BV/CH/TochecktheIUT'sbehaviourconcerningthecipheringrelatedproceduresPT/MM/BO/TochecktheIUTbehaviourinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomephaseoftheMMproceduresPT/MM/BI/TochecktheIUTinresponsetoinvalidMMmessagesPT/MM/TI/ToverifythattheIUTMMtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerPT/ME/TocheckthebehaviouroftheLLMEoftheIUTPT/ME/IT/TocheckthatLLMEoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingPT/ME/CA/LimitedtestingthattheobservablecapabilitiesoftheLLMEoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITPT/ME/BV/TotesttheLLMEoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemPT/ME/BO/TochecktheIUTbehaviourinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomephaseoftheLLMEmanagedproceduresPT/LC/TocheckthebehaviouroftheLCEoftheIUTSIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)11TSSSuiteName:nwk_ptStandardsRef:EN300444[7];EN300497-7[19]ProfileICSRef:ETS300474-1[22]ProfileIXITRef:EN300494-2(thepresentdocument)TestMethod:remoteComments:TestGroupReferenceTestGroupObjectivePT/LC/IT/TocheckthatLCEoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingPT/LC/CA/LimitedtestingthattheobservablecapabilitiesoftheLCEoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITPT/LC/BV/TotesttheLCEoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemPT/LC/BV/LE/TochecktheIUT'sbehaviourconcerningtheconnectionorientedlinkestablishmentproceduresPT/LC/BV/LR/TochecktheIUT'sbehaviourconcerningtheconnectionorientedlinkreleaseproceduresPT/LC/BI/TochecktheIUTinresponsetoinvalidLCEmessagesPT/LC/TI/ToverifythattheIUTLCEtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerDetailedComments:Thesub-sub-groupswithidentifiersPT/xx/IT/andPT/xx/CA/donotincludetheirowntestcasesbutonlylistanappropriateselectionoftestsfromtherelevantsub-groupwithidentifierPT/xx/.SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)124.1.2TestcaseindexTable2TestCaseIndexTestGroupReferenceTestCaseIdDescriptionPT/CC/BV/OC/TC_PT_CC_BV_OC_01Outgoingcall;T-00,T-01,T-02,T-03,T-04,T-10;piecewisediallinginT-02TC_PT_CC_BV_OC_02Outgoingcall;statesT-00,T-01,T-10;piecewisediallinginT-10TC_PT_CC_BV_OC_03Outgoingcall;statesT-00,T-01,T-02,T-10;piecewisediallinginT-02andT-10TC_PT_CC_BV_OC_04Outgoingcall;U-planeconnectionupon<>in{CC-SETUP-ACK}PT/CC/BV/IC/TC_PT_CC_BV_IC_01Incomingcall;T-01,T-06,T-07,T-08,T-10;<>inT-07TC_PT_CC_BV_IC_02Incomingcall;T-01,T-06,T-07,T-08,T-10;<>in{CC-SETUP}PT/CC/BV/CI/TC_PT_CC_BV_CI_01Alertingtheuser;Incomingcall;<>in{CC-SETUP}TC_PT_CC_BV_CI_02GotopulseinvocationinT-02;OutgoingcallTC_PT_CC_BV_CI_03GotopulseinvocationinT-10;OutgoingcallTC_PT_CC_BV_CI_04DiallingpauseindicationinT-02;OutgoingcallTC_PT_CC_BV_CI_05DiallingpauseindicationinT-10;OutgoingcallTC_PT_CC_BV_CI_06GotoDTMFinvocationinT-02;definedtonelength;OutgoingcallTC_PT_CC_BV_CI_07GotoDTMFinvocationinT-10;definedtonelength;OutgoingcallTC_PT_CC_BV_CI_08GotoDTMFinvocationinT-02;infinitetonelength;OutgoingcallTC_PT_CC_BV_CI_09GotoDTMFinvocationinT-10;infinitetonelength;OutgoingcallTC_PT_CC_BV_CI_10Outgoingnormalcall;T-02;{CC-INFO],sending<>,"0-9,star,hashmark"TC_PT_CC_BV_CI_11InternalcallTC_PT_CC_BV_CI_12T-10;{CC-INFO},<>standardcharactershandlingTC_PT_CC_BV_CI_13T-10;{CC-INFO},<>controlcharactershandlingTC_PT_CC_BV_CI_14T-10;invocationof"Registerrecall";{CC-INFO},<>PT/CC/BV/CR/TC_PT_CC_BV_CR_01Outgoingnormalcall;T-02;FTinitiatednormalreleaseTC_PT_CC_BV_CR_02Outgoingnormalcall;T-03;FTinitiatednormalreleaseTC_PT_CC_BV_CR_03Outgoingnormalcall;T-04;FTinitiatednormalreleaseTC_PT_CC_BV_CR_04Incomingcall;T-08;FTinitiatednormalreleaseTC_PT_CC_BV_CR_05T-10;FTinitiatednormalreleaseTC_PT_CC_BV_CR_06T-10;IUTinitiatednormalreleaseTC_PT_CC_BV_CR_07T-01;FTinitiatedabnormalreleaseTC_PT_CC_BV_CR_08T-02;FTinitiatedabnormalreleaseTC_PT_CC_BV_CR_09T-10;FTinitiatedabnormalreleaseTC_PT_CC_BV_CR_10T-10;FTinitiatedpartialreleaseTC_PT_CC_BV_CR_11T-10;IUTinitiatedpartialreleasePT/CC/BV/RS/TC_PT_CC_BV_RS_01T-00;Incomingcall;{CC-SETUP}with<>;CLIPhandlingPT/CC/BO/TC_PT_CC_BO_01T-03;unexpectedmessage{CC-CALL-PROC};ignoreTC_PT_CC_BO_02T-19;receiptof{CC-RELEASE};releasecollision;clearthecallPT/CC/BI/TC_PT_CC_BI_01T-00;{CC-SETUP}mandatoryI.E.missing;answeruponwith{CC-RELEASE-COM]TC_PT_CC_BI_02T-00;{CC-SETUP}wrongmandatoryI.E.;answeruponwith{CC-RELEASE-COM]TC_PT_CC_BI_03T-00;{CC-SETUP}-likemessage,non{CC-SETUP}unrecognizedmessagetype;ignoreSIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)13TestCaseIndexTestGroupReferenceTestCaseIdDescriptionPT/CC/TI/TC_PT_CC_TI_01T-19;timerP-expiry(-10%margin);IUTsends{CC-RELEASE-COM}TC_PT_CC_TI_02Outgoingcall;T-01;timerP-expiry(-10%margin);IUTsends{CC-RELEASE-COM}TC_PT_CC_TI_03T-01;restartsP-upon{CC-NOTIFY}TC_PT_CC_TI_04Outgoingcall;T-08;timerP-expiry(-10%margin);IUTsends{CC-RELEASE}PT/MM/BV/ID/TC_PT_MM_BV_ID_01Identityrequest;IPUItyperequested;activeIPUIreturnedTC_PT_MM_BV_ID_02Identityrequest;unavailableid.typerequested;noidentityinthereplyTC_PT_MM_BV_ID_08Identityrequest;PARKrequested;activePARKreturnedPT/MM/BV/AU/TC_PT_MM_BV_AU_01AuthenticationofPT;IUT(PT)hasnostoredZAPvalueandserviceclassinfoTC_PT_MM_BV_AU_02AuthenticationofPT;unacceptablealgorithmrequested;rejectTC_PT_MM_BV_AU_03AuthenticationofPT;IUT(PT)hasstoredZAPvalue;IUTincludesZAPvalueinthereplayTC_PT_MM_BV_AU_04AuthenticationofPT;ZAPincrementhandlingTC_PT_MM_BV_AU_05AuthenticationofPT;ZAPincrementhandling;unsuccessfulauthenticationofFT;ZAPisnotincrementedTC_PT_MM_BV_AU_06AuthenticationofPT;storageofDCKhandlingTC_PT_MM_BV_AU_07AuthenticationofuserTC_PT_MM_BV_AU_08AuthenticationofFT;IUTinitiatedTC_PT_MM_BV_AU_09AuthenticationofPT;IUT(PT)hasstoredserviceclassinfo;IUTincludesserviceclassinfointhereplyPT/MM/BV/LO/TC_PT_MM_BV_LO_01Locationregistrationafterobtainaccessrights;a44anda38=1atlocking;noTPUIassignmentTC_PT_MM_BV_LO_02Locationregistrationafterobtainaccessrights;a44anda38=1atlocking;TPUIassignmentTC_PT_MM_BV_LO_03Locationregistrationafterobtainaccessrights;a44=1anda38=0atlocking;IUTdoesnotperformlocationregistrationTC_PT_MM_BV_LO_04Locationregistration;noCCactivities;locationareachanges;a38=1atlockingandatthebeginningoftheprocedure;noTPUIassignmentTC_PT_MM_BV_LO_05NoCCactivities;poweroff;poweron;LocationregistrationrequestTC_PT_MM_BV_LO_06Locationregistration;unacceptableTPUIassignment;rejectTC_PT_MM_BV_LO_07Locationregistration;enteringnewlocationarea;IUTdeletesoldTPUI-noTPUIinidentityreplysentfromIUTTC_PT_MM_BV_LO_08LocationupdatesuggestedbyFT;LocationregistrationinitiatedbyIUT;a38=1atlockingandatthebeginningoftheprocedureTC_PT_MM_BV_LO_09LocationupdatesuggestedbyFT;LocationregistrationinitiatedbyIUT;a38=1atlocking,a38=0atthebeginningoftheprocedureTC_PT_MM_BV_LO_10VerifythattheIUTcancorrectlyperformlocationregistrationandafollowingoutgoingcallwhenitusesSARIasthemeanstolocktotheLTPT/MM/BV/AR/TC_PT_MM_BV_AR_01Obtainaccessrights;a44=1;bothsidesuseACTC_PT_MM_BV_AR_03Obtainaccessrights;a44=0;IUTdoesnotinitiateobtainaccessrightsprocedureTC_PT_MM_BV_AR_05Terminateaccessrights;FTinitiated;IUT(PT)mayauthenticateFTTC_PT_MM_BV_AR_06Terminateaccessrights;FTinitiated;IUT(PT)authenticatesFT;authenticationfails;terminationrejectedTC_PT_MM_BV_AR_09Obtainaccessrights;FTassignsZAPfield;IUTstoresitTC_PT_MM_BV_AR_10Obtainaccessrights;FTassignsserviceclass;IUTstoresitPT/MM/BV/KA/TC_PT_MM_BV_KA_01KeyallocationTC_PT_MM_BV_KA_02Keyallocation;<>unacceptable;rejectTC_PT_MM_BV_KA_03Keyallocation;implicitauthenticationofFTfails;keyisnotallocatedSIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)14TestCaseIndexTestGroupReferenceTestCaseIdDescriptionPT/MM/BV/CH/TC_PT_MM_BV_CH_01Cipherswitching;IUT(PT)initiated;"cipher-off"to"cipher-on"TC_PT_MM_BV_CH_02Cipherswitching;IUT(PT)initiated;"cipher-on"to"cipher-off"TC_PT_MM_BV_CH_03Cipherswitching;FTinitiated;"cipher-off"to"cipher-on"TC_PT_MM_BV_CH_04Cipherswitching;FTinitiated;"cipher-on"to"cipher-off"TC_PT_MM_BV_CH_05Cipherswitching;FTinitiated;"cipher-off"to"cipher-on";unacceptablealgorithmorkey;rejectTC_PT_MM_BV_CH_08Cipherswitching;IUT(PT)initiated;"cipher-off"to"cipher-on"fails;releaseoflinkTC_PT_MM_BV_CH_09Cipherswitching;IUT(PT)initiated;"cipher-off"to"cipher-on";successfulinter-cellbearerhandoverTC_PT_MM_BV_CH_10Cipherswitching;IUT(PT)initiated;"cipher-off"to"cipher-on";successfulintra-cellbearerhandoverTC_PT_MM_BV_CH_11Cipherswitching;IUT(PT)initiated;"cipher-off"to"cipher-on";"cipher-on"to"cipher-off"fails;releaseoflinkTC_PT_MM_BV_CH_12Cipherswitching;FTinitiated;"cipher-off"to"cipher-on"fails;releaseoflinkTC_PT_MM_BV_CH_13Cipherswitching;FTinitiated;"cipher-off"to"cipher-on";successfulinter-cellbearerhandoverTC_PT_MM_BV_CH_14Cipherswitching;FTinitiated;"cipher-off"to"cipher-on";successfulintra-cellbearerhandoverTC_PT_MM_BV_CH_15Cipherswitching;FTinitiated;"cipher-off"to"cipher-on";"cipher-on"to"cipher-off"fails;releaseoflinkPT/MM/BO/TC_PT_MM_BO_01Locationregistrationrequest;receiptof{ACCES-RIGHT-ACCEPT};unexpected,ignorePT/MM/BI/TC_PT_MM_BI_01Unrecognizedmessagetype;ignoreTC_PT_MM_BI_02"Cipheroff";{CIPHER-REQUEST},withinvalid<>;rejectTC_PT_MM_BI_03AuthenticationofPT;{AUTH-REQUEST}missing<>;rejectTC_PT_MM_BI_04Obtainaccessrights;{ACCESS-RIGHTS-ACCEPT},wrong<>;ignorePT/MM/TI/TC_PT_MM_TI_01Keyallocation;timerP-expiry(+5%margin)TC_PT_MM_TI_03Locationregistration;justbeforetimerP-expiry(-10%margin)TC_PT_MM_TI_04Obtainaccessrights;justbeforetimerP-expiry(-10%margin)TC_PT_MM_TI_05Cipherswitching;IUT(PT)initiated;timerP-expiry(-10%margin)PT/ME/BV/TC_PT_ME_BV_01Outgoingcall;T-01;AuthenticationofIUT(PT)performedbeforeansweringthesetuprequestTC_PT_ME_BV_03Obtainaccessrights;InterruptedbyAuthenticationofuserTC_PT_ME_BV_04Obtainaccessrights;InterruptedbyAuthenticationofIUT(PT)TC_PT_ME_BV_05OutgoingcallandauthenticationofIUT(PT)inparallelTC_PT_ME_BV_06OutgoingcallandcipherswitchingFTinitiatedinparallelTC_PT_ME_BV_07Outgoingcall;T-01;CipherswitchingFTinitiatedperformedbeforeansweringthesetuprequestTC_PT_ME_BV_09Cipheron;StoreDCK;newDCKnotusedinthecurrentcipheringTC_PT_ME_BV_10T-10;a38=1;locationareachanges;locationregistrationrequestduringthecallorinT-00TC_PT_ME_BV_11Outgoingcall;T-01;TerminateaccessrightsFTinitiatedperformedbeforeansweringthesetuprequestTC_PT_ME_BV_12T-10;linkfails;IUTclearsthecallTC_PT_ME_BV_13ObtainaccessrightsinterruptedbykeyallocationPT/ME/BO/TC_PT_ME_BO_01AuthenticationofFTinterruptedby{AUTH-REQUEST}fromFT;ignorePT/LC/BV/LE/TC_PT_LC_BV_LE_01Directlinkestablishment;IUTinitiatedTC_PT_LC_BV_LE_02IndirectFTinitiatedlinkestablishmentPT/LC/BV/LR/TC_PT_LC_BV_LR_01Linkexists;MMentityceasestousethelink;nootherentityusesthelink;IUTmaintainsthelinktimeTC_PT_LC_BV_LR_02Linkexists;CCentityceasestousethelink;nootherentityusesthelink;normalreleaseSIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)15TestCaseIndexTestGroupReferenceTestCaseIdDescriptionTC_PT_LC_BV_LR_03Linkexists;CCentityceasestousethelink;partialreleaseagreed;nootherentityusesthelink;IUTmaintainsthelinktimePT/LC/BI/TC_PT_LC_BI_01Protocoldiscriminatorvalueerror-unsupportedservice;IUTignoresTC_PT_LC_BI_03{IDENTITY-REQUEST}withillegaltransactionid.;ignorePT/LC/TI/TC_PT_LC_TI_02MMceasestousethelink;nootherentityusesthelink;timerexpiry(allowedperiod:(TSPX_lce_02-1000)msto10500ms)DetailedComments:ThePTistheIUT.4.2DataLinkControl(DLC)layerThisclauseincludeslistsofthetestgroupsandtheabstracttestcasesrelevantforGAPPTS-DLClayerPTderivedfromEN300497-5[17].4.2.1TestsuitestructureTable3TestSuiteStructureSuiteName:DLCStandardsRef:EN300444[7];EN300497-5[17]ProfileICSRef:ETS300474-1[22]ProfileIXITRef:EN300494-2(thepresentdocument)TestMethod:remoteComments:TestGroupReferenceTestGroupObjectiveDLC/VerifythecorrectimplementationoftheFT(IUT)DLClayerDLC/C_Plane/VerifythecorrectimplementationoftheC-planedatalinkservicesDLC/C_Plane/ClassA/VerifythecorrectimplementationoftheLAPC'sClassAacknowledgedtransferoperationDLC/C_Plane/ClassA/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheLAPC'sClassAacknowledgedtransferoperationareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePICS/PIXITDLC/C_Plane/ClassA/BV/TotestthebehaviouroftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemDLC/C_Plane/ClassA/BI/TocheckthebehaviouroftheoftheIUTinresponsetoinvalidframesDLC/C_Plane/ClassA/BO/TocheckthebehaviouroftheIUTinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomestatesoftheLAPC'sClassAacknowledgedtransferoperationDLC/C_Plane/Lb/VerifythecorrectimplementationoftheLb(C-planebroadcastcontrol)entityDLC/C_Plane/Lb/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheLb(C-planebroadcastcontrol)entityareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePICS/PIXITDLC/U_Plane/VerifythecorrectimplementationoftheU-planeservicesDLC/U_Plane/Class0/VerifythecorrectimplementationoftheClass0transmissionclassDLC/U_Plane/Class0/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheClass0transmissionclassserviceareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePICS/PIXITDetailedComments:SIST EN 300 494-2 V1.3.1:2003
ETSIETSIEN300494-2V1.3.1(2001-04)164.2.2TestcaseindexTable4TestCaseIndexTestGroupReferenceTestCaseIdDescriptionDLC/C_Plane/ClassA/CA/TC_A_CA_000Re-transmissionofthelinkestablishmentI-FramerequestN250timesTC_A_CA_001Linkestablishmentrequest;receiptofavalidRRframe;entersestablishedstateTC_A_CA_005I-FrameacknowledgementwithintimerTC_A_CA_006Re-transmissionofanI-FrameN250timesDLC/C_Plane/ClassA/BV/TC_A_BV_002I-Frameacknowledgement;acceptingRRresponseframewithcorrectN(R)TC_A_BV_003I-Frameacknowledgement;acceptinganI-FramecommandwithcorrectN(S)andN(R)valuesasanacknowledgementTC_A_BV_005Timerretransmissionphase;acceptanceofaRRresponseframewithcorrectN(R)valueasanacknowledgementTC_A_BV_006Timerretransmissionphase;acceptanceofanI-FramecommandwithcorrectN(S)andN(R)valuesasanacknowledgementTC_A_BV_007Connectionhandover;PTinitiatedintracellTC_A_BV_008Connectionhandover;PTinitiatedintercellDLC/C_Plane/ClassA/BI/TC_A_BI_000ClassAestablishmentpendingstate;discardingRRClassBresponseframewithNLFbitsetto"1";re-transmittingtheestablishmentrequestTC_A_BI_001establishmentpendingstate;discardingRRresponseframewithNLFbitsetto"1"andinvalidN(R);re-transmittingtheestablishmentrequestTC_A_BI_002ClassAre-establishmentpendingstate;discardingRRClassBresponseframewithNLFbitsetto"1";re-transmitsthere-establishmentreq
...