oSIST prEN IEC 60794-1-302:2024

SLOVENSKI STANDARD
01-julij-2024
Optični kabli - 1-302. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Mere in geometrija traku
- Vizualna metoda, metoda G2
Optical fibre cables - Part 1-302: Generic specification - Basic optical cable test
procedures - Cable element test methods - Ribbon dimensions and geometry - Visual
method, Method G2
Câbles à fibres optiques - Partie 1-302: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d'essai des éléments de câbles
- Dimensions et géométrie du ruban - Méthode visuelle, méthode g2
Ta slovenski standard je istoveten z: prEN IEC 60794-1-302:2024
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

86A/2447/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-302 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-05-10 2024-08-02
SUPERSEDES DOCUMENTS:
86A/2343/CD, 86A/2444/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Optical fibre cables - Part 1-302: Generic specification - Basic optical cable test procedures - Cable element
test methods - Ribbon dimensions and geometry – Visual method, Method G2

PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writi ng from IEC.

86A/2447/CDV – 2 – IEC CDV 60794-1-302 © IEC 2024

CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 6
5 Method G2: Ribbon dimensions and geometry – Visual method . 6
5.1 Object . 6
5.2 Sample . 6
5.3 Apparatus . 6
5.4 Definitions of ribbon dimensions and geometry . 6
5.4.1 General . 6
5.4.2 Width and height. 7
5.4.3 Basis line . 7
5.4.4 Fibre alignment . 7
5.5 Procedure . 7
5.5.1 General . 7
5.5.2 Method 1 . 7
5.5.3 Method 2 . 8
5.6 Requirements . 8
5.7 Details to be specified . 8
Bibliography . 9

Figure 1 – Cross-sectional drawing illustrating fibre ribbon geometry . 6

IEC CDV 60794-1-302 © IEC 2024 – 3 – 86A/2447/CDV
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES
Part 1-302: Generic specification
– Basic optical cable test procedures Cable element test
methods -
– Ribbon dimensions and geometry – Visual method, Method G2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Public
...