SIST EN IEC 61131-2:202X/oprAA:2024
(Amendment)Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
This part of IEC 61131 specifies functional and electromagnetic compatibility requirements
and related verification tests for industrial control equipment of the following types:
- programmable controllers (PLC);
- programmable automation controller (PAC);
- remote I/O;
- programming and debugging tools (PADTs);
- industrial PC (computers) and industrial panel PC;
- displays and human-machine Interfaces (HMI) for industrial use;
- distributed control system (DCS), and DCS components that are listed here in the scope;
- any product where the primary purpose is performing the function of industrial control equipment, including PLC and/or PAC, and/or their associated peripherals which have as their intended use the control and command of machines, automated manufacturing and
industrial processes, e.g. discrete, batch and continuous control.
In this document "control equipment" is equivalent to "industrial control equipment" as are PLC and PAC.
Speicherprogrammierbare Steuerungen - Teil 2: Betriebsmittelanforderungen und Prüfungen
Mesurage et contrôle des processus industriels - Automates programmables - Partie 2: Exigences et essais des équipements
Merjenje in nadzor v industrijskih procesih - Programirljivi krmilniki - 2. del: Zahteve za opremo in preskusi
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61131-2:202X/oprAA:2024
01-julij-2024
Merjenje in nadzor v industrijskih procesih - Programirljivi krmilniki - 2. del:
Zahteve za opremo in preskusi
Industrial-process measurement and control - Programmable controllers - Part 2:
Equipment requirements and tests
Speicherprogrammierbare Steuerungen - Teil 2: Betriebsmittelanforderungen und
Prüfungen
Mesurage et contrôle des processus industriels - Automates programmables - Partie 2:
Exigences et essais des équipements
Ta slovenski standard je istoveten z: EN IEC 61131-2:202X/prAA:2024
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 61131-2:202X/oprAA:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61131-2:202X/oprAA:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61131-2:202X/oprAA:2024
EUROPEAN STANDARD DRAFT
EN IEC 61131-2:202X
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
May 2024
ICS -
English Version
Industrial-process measurement and control - Programmable
controllers - Part 2: Equipment requirements and tests
Mesurage et contrôle des processus industriels - Automates Speicherprogrammierbare Steuerungen - Teil 2:
programmables - Partie 2: Exigences et essais des Betriebsmittelanforderungen und Prüfungen
équipements
This draft amendment prAA, if approved, will modify the European Standard EN IEC 61131-2:202X; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-08-09.
It has been drawn up by CLC/TC 65X.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
Recipients
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 77429 Ref. No. EN IEC 61131-2:202X/prAA:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61131-2:202X/oprAA:2024
EN IEC 61131-2:202X/prAA:2024 (E)
1 Contents Page
2 European foreword . 3
3 Introduction. 4
4 1 Modifications to Clause 1, “Scope” . 5
5 2 Modification to Clause 2, “Normative references” . 5
6 3 Modifications to Clause 4, “Compliance and type tests” . 5
7 4 Modifications to Clause 7, “Electromagnetic Compatibility (EMC) requirements” . 8
8 Annex ZA (normative) Normative references to international publications with their corresponding
9 European publications . 15
10 Annex ZZ (informative) Relationship between this European standard and the essential requirements
11 of Directive 2014/30/EU [2014 OJ L96] aimed to be covered . 18
2
---------------------- Page
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.