SIST EN ISO 24157:2008/A1:2020

SLOVENSKI STANDARD
01-april-2020
Očesna optika in instrumenti - Postopek prikaza aberacije človeškega očesa -
Dopolnilo A1 (ISO 24157:2008/Amd 1:2020)
Ophthalmic optics and instruments - Reporting aberrations of the human eye -
Amendment 1 (ISO 24157:2008/Amd 1:2020)
Augenoptik und ophthalmische Instrumente - Verfahren zur Darstellung von
Abbildungsfehlern des menschlichen Auges - Änderung 1 (ISO 24157:2008/Amd 1:2020)
Optique et instruments ophtalmiques - Méthodes de présentation des aberrations de
l'oeil humain - Amendement 1 (ISO 24157:2008/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 24157:2008/A1:2020
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 24157:2008/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 11.040.70
English Version
Ophthalmic optics and instruments - Reporting
aberrations of the human eye - Amendment 1 (ISO
24157:2008/Amd 1:2020)
Optique et instruments ophtalmiques - Méthodes de Augenoptik und ophthalmische Instrumente -
présentation des aberrations de l'oeil humain - Verfahren zur Darstellung von Abbildungsfehlern des
Amendement 1 (ISO 24157:2008/Amd 1:2020) menschlichen Auges - Änderung 1 (ISO
24157:2008/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 24157:2008; it was approved by CEN on 1 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24157:2008/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 24157:2008/A1:2020) has been prepared by Technical Committee ISO/TC 172
"Optics and photonics" in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 24157:2008 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2020, and
conflicting national standards shall be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24157:2008/Amd 1:2020 has been approved by CEN as EN ISO 24157:2008/A1:2020
without any modification.
-------
...