SIST EN 60684-3-100 to 105:2002
(Main)Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 100 to 105: Extruded PVC sleeving
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 100 to 105: Extruded PVC sleeving
Gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC.
Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm.
Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage.
Sheets 100 and 103 cover sleeving having a temperature range of -10 °C to 90 °C.
Sheets 101 and 104 cover sleeving having a temperature range of -10 °C to 105 °C.
Sheets 102 and 105 cover sleeving having a temperature range of -40 °C to 70 °C.
Isolierschläuche -- Teil 3: Anforderungen für einzelne Schlauchtypen -- Blätter 100 bis 105: Extrudierte PVC-Schläuche
Gaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines -- Feuilles 100 à 105: Gaines en PVC extrudé
Donne les prescriptions pour trois types de gaine en PVC extrudé, non thermorétractables.
Les gaines de ce type sont généralement fournies avec des diamètres intérieurs allant jusqu'à 50 mm et dans des gammes d'épaisseur de paroi comprises entre 0,2 mm et 1,8 mm.
Chaque feuille décrit trois niveaux d'épaisseur de paroi: «paroi mince», «paroi normale», «paroi épaisse», selon le diamètre intérieur nominal, avec, par conséquent, des prescriptions différentes pour la tension de claquage.
Les feuilles 100 et 103 couvrent les gaines ayant une gamme de température comprise entre -10 °C et 90 °C.
Les feuilles 101 et 104 couvrent les gaines ayant une gamme de température comprise entre -10 °C et 105 °C.
Les feuilles 102 et 105 couvrent les gaines ayant une gamme de température comprise entre -40 °C et 70 °C.
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001)
General Information
- Status
- Published
- Publication Date
- 30-Sep-2002
- Technical Committee
- IZO - Insulating materials
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Oct-2002
- Due Date
- 01-Oct-2002
- Completion Date
- 01-Oct-2002
Relations
- Effective Date
- 06-May-2014
Overview
EN 60684-3-100 to 105:2001 - part of the EN/IEC 60684 series - specifies requirements for extruded PVC flexible insulating sleeving. This document covers three types of non-heatshrinkable sleeving extruded from PVC, and is intended for manufacturers, test laboratories and users of electrical insulating sleeving. The standard is aligned with IEC 60684-3-100 to 105:2001 and defines dimensional, electrical and thermal characteristics for sheets 100–105.
Key topics and requirements
- Material and type: Extruded PVC, non-heatshrinkable flexible insulating sleeving.
- Dimensional range: Internal diameters normally available up to 50 mm; wall thicknesses from 0.2 mm to 1.8 mm.
- Wall categories: Each sheet covers up to three wall-thickness levels - thin wall, standard wall, thick wall - linked to nominal internal diameter and corresponding differences in breakdown voltage requirements.
- Temperature ratings:
- Sheets 100 & 103: temperature range -10 °C to 90 °C
- Sheets 101 & 104: temperature range -10 °C to 105 °C
- Sheets 102 & 105: temperature range -40 °C to 70 °C
- Electrical performance: Specifies requirements for dielectric strength / breakdown voltage related to wall-thickness categories (exact test methods and limits are given in the standard).
- Scope limits: Applies specifically to extruded PVC sleeving types covered by sheets 100–105 and does not cover heat-shrinkable or other material types (covered elsewhere in the 60684 series).
Applications and who uses it
- Cable and wire harness manufacturers selecting PVC sleeving for insulation, abrasion protection and identification.
- Electrical and electronics OEMs specifying materials for internal wiring, appliance wiring, and control panels.
- Procurement and quality teams who require confirmed compliance with EN/IEC standards for material acceptance and supplier audits.
- Test laboratories conducting dielectric strength, dimensional and temperature performance tests to verify conformity.
- Installation and maintenance engineers referencing temperature and mechanical suitability for field or industrial applications.
Related standards
- EN 60684 series / IEC 60684 family: other parts cover general requirements and alternate sleeving materials (e.g., heat-shrinkable types). Refer to the full EN/IEC 60684 catalog for cross-references and complementary specifications.
Keywords: EN 60684-3-100, extruded PVC sleeving, flexible insulating sleeving, non-heatshrinkable sleeving, breakdown voltage, wall thickness, temperature range, cable sleeving, wire harness.
Frequently Asked Questions
SIST EN 60684-3-100 to 105:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 100 to 105: Extruded PVC sleeving". This standard covers: Gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC. Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Sheets 100 and 103 cover sleeving having a temperature range of -10 °C to 90 °C. Sheets 101 and 104 cover sleeving having a temperature range of -10 °C to 105 °C. Sheets 102 and 105 cover sleeving having a temperature range of -40 °C to 70 °C.
Gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC. Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Sheets 100 and 103 cover sleeving having a temperature range of -10 °C to 90 °C. Sheets 101 and 104 cover sleeving having a temperature range of -10 °C to 105 °C. Sheets 102 and 105 cover sleeving having a temperature range of -40 °C to 70 °C.
SIST EN 60684-3-100 to 105:2002 is classified under the following ICS (International Classification for Standards) categories: 29.035.20 - Plastics and rubber insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60684-3-100 to 105:2002 has the following relationships with other standards: It is inter standard links to SIST HD 523.3.100 to 105 S1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 60684-3-100 to 105:2002 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2002
1DGRPHãþD
SIST HD 523.3.100 to 105 S1:1998
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving
- Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001)
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --
Sheets 100 to 105: Extruded PVC sleeving
Isolierschläuche -- Teil 3: Anforderungen für einzelne Schlauchtypen -- Blätter 100 bis
105: Extrudierte PVC-Schläuche
Gaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines --
Feuilles 100 à 105: Gaines en PVC extrudé
Ta slovenski standard je istoveten z: EN 60684-3-100 to 105:2001
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...