SIST EN 60454-3-12:2006

SLOVENSKI SIST EN 60454-3-12:2006

STANDARD
oct 2006
Samolepilni trakovi za uporabo v elektrotehniki – 3. del: Specifikacije za
posamezne materiale – List 12: Zahteve za samolepilne trakove iz polietilena
in polipropilena (IEC 60454-3-12:2006)
Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications
for individual materials – Sheet 12: Requirements for polyethylene and
polypropylene film tapes with pressure sensitive adhesive (IEC 60454-3-12:2006)
ICS 29.035.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD
EN 60454-3-12
NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM
ICS 29.035.20 Supersedes EN 60454-3-12:1998 & EN 60454-3-18:2003

English version
Pressure-sensitive adhesive tapes for electrical purposes
Part 3: Specifications for individual materials
Sheet 12: Requirements for polyethylene and polypropylene film tapes
with pressure sensitive adhesive
(IEC 60454-3-12:2006)
Rubans adhésifs sensibles à la pression Selbstklebende Bänder
à usages électriques für elektrotechnische Anwendungen
Partie 3: Spécifications Teil 3: Bestimmungen
pour matériaux particuliers für einzelne Materialien
Feuille 12: Exigences pour rubans Blatt 12: Anforderungen
en polyéthylène ou en polypropylène an selbstklebende Bänder
avec un adhésif sensible à la pression aus Polyethylen- und Polypropylen-Folie
(CEI 60454-3-12:2006) (IEC 60454-3-12:2006)

This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60454-3-12:2006 E
Foreword
The text of document 15/261/FDIS, future edition 2 of IEC 60454-3-12, prepared by IEC TC 15,
Standards on specifications for electrical insulating materials, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 60454-3-12 on 2006-04-01.
This European Standard supersedes EN 60454-3-12:1998 and EN 60454-3-18:2003. The revision
includes its consolidation with the text of EN 60454-3-18.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60454-3-12:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60454-3-12:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60426 1973 Test methods for determining - -
electrolytic corrosion with insulating
materials
IEC 60454-1 1992 Specifications for pressure-sensitive EN 60454-1 1994
adhesive tapes for electrical purposes
Part 1: General requirements
IEC 60454-2 1994 Part 2: Methods of test EN 60454-2 1995

INTERNATIONAL IEC
STANDARD 60454-3-12
Second edition
2006-01
Pressure-sensitive adhesive tapes
for electrical purposes –
Part 3:
Specifications for individual materials –
Sheet 12: Requirements for polyethylene
and polypropylene film tapes
with pressure sensitive adhesive

 IEC 2006  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale J
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60454-3-12  IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 12: Requirements for polyethylene and polypropylene
film tapes with pressure sensitive adhesive

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60454-3-12 has been prepared by IEC technical committee 15:
Insulating materials.
This second edition of IEC 60454-3-12 replaces the first edition, published in 1998, as well as
IEC 60454-3-18, published in 2003. It constitutes a technical revision. This edition replaces
the previous second edition and includes its consolidation with the texts of IEC 60454-3-18
(2003).
The text of this standard is based on the following documents:
FDIS Re
...