SIST EN 14488-6:2006
(Main)Testing sprayed concrete - Part 6: Thickness of concrete on a substrate
Testing sprayed concrete - Part 6: Thickness of concrete on a substrate
This standard describes methods for the determination of the thickness of sprayed concrete on a substrate after spraying. The results can also give an indication of the parallelism of the concrete to the substrate. The substrate may be rock, soil, concrete or other surface.
Prüfung von Spritzbeton - Teil 6: Schichtdicke von Betons auf einem Untergrund
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Schichtdicke von Spritzbeton auf einem Untergrund nach dem Aufspritzen. Die Ergebnisse können auch einen Hinweis bezüglich paralleler Schichtenlagen des Betons über dem Untergrund liefern. Der Untergrund kann aus Gestein, Erdboden, Beton oder anderen Material bestehen.
Essais pour béton projeté - Partie 6 : Epaisseur du béton sur un support
La présente norme décrit des méthodes de détermination de l’épaisseur du béton apres projection sur un support. Les résultats peuvent également donner une indication sur le parallélisme du béton sur le support. Le support peut etre de la roche, du terrain, du béton ou toute autre surface.
Preskušanje brizganega betona – 6. del: Debelina betona na podlagi
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Testing sprayed concrete - Part 6: Thickness of concrete on a substratePreskušanje brizganega betona – 6. del: Debelina betona na podlagiEssais pour béton projeté - Partie 6 : Epaisseur du béton sur un supportPrüfung von Spritzbeton - Teil 6: Schichtdicke von Betons auf einem UntergrundTa slovenski standard je istoveten z:EN 14488-6:2006SIST EN 14488-6:2006en91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 14488-6:200601-oktober-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14488-6June 2006ICS 91.100.30 English VersionTesting sprayed concrete - Part 6: Thickness of concrete on asubstrateEssais pour béton projeté - Partie 6 : Epaisseur du bétonsur un supportPrüfung von Spritzbeton - Teil 6: Schichtdicke von Betonauf einem UntergrundThis European Standard was approved by CEN on 3 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14488-6:2006: E
EN 14488-6:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Equipment.4 5 Test procedures.5 5.1 Marking of positions.5 5.2 Drilling of holes or cores.5 5.3 Measurement.5 5.3.1 Fresh concrete.5 5.3.2 Hardened concrete.5 6 Results.5 7 Report.6 Bibliography.7
EN 14488-6:2006 (E) 3 Foreword This document (EN 14488-6:2006) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2007. This Draft European Standard part of a series concerned with testing sprayed concrete. This series EN 14488 ‘Testing sprayed concrete’ includes the following parts: Part 1: Sampling fresh and hardened concrete Part 2: Compressive strength of young sprayed concrete Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens Part 4: Bond strength of cores by direct tension Part 5: Determination of energy absorption capacity of fibre r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.