SIST EN IEC 61300-3-4:2023
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4:2023)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4:2023)
IEC 61300-3-4:2023 is available as SIST IEC 61300-3-4:2023 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61300-3-4: 2022 describes the various methods available to measure the attenuation of optical components. It is not, however, applicable to random mate attenuation measurements as described in IEC 61300-3-34 and IEC 61300-3-45 nor for attenuation measurements of dense wavelength division multiplexing (DWDM) devices as described in IEC 61300-3-29. This fourth edition cancels and replaces the third edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of Clause 3 containing terms, definitions and abbreviated terms;
b) addition of a new LSPM measurement method, insertion method (D);
c) addition of Annex A describing attenuation measurement of multicore fibre;
d) changed reference test method to insertion C and alternative test method to substitution or insertion D for power meter and type 4 DUT.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-4: Untersuchungen und Messungen - Dämpfung (IEC 61300-3-4:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-4: Examens et mesures - Affaiblissement (IEC 61300-3-4:2023)
IEC 61300-3-4:2023 est disponible sous forme de IEC 61300-3-4:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61300-3-4:2023 décrit les différentes méthodes disponibles qui permettent de mesurer l’affaiblissement des composants optiques. Toutefois, elle n’est applicable ni aux mesurages de l’affaiblissement dû à l’accouplement aléatoire décrits dans l’IEC 61300-3-34 et l’IEC 61300-3-45 ni aux mesurages de l’affaiblissement des dispositifs de multiplexage par répartition en longueur d’onde à forte densité (DWDM - dense wavelengths division multiplexer) décrits dans l’IEC 61300-3-29. Cette quatrième édition annule et remplace la troisième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout de l’Article 3 relatif aux termes, définitions et abréviations;
b) ajout d'une nouvelle méthode de mesure LSPM, la méthode par insertion (D);
c) ajout de l’Annexe A qui décrit le mesurage de l'affaiblissement de la fibre multicœur;
d) modification de la méthode d'essai de référence par insertion C et de la méthode d'essai alternative par substitution ou par insertion D pour l’appareil de mesure de la puissance et le DUT de type 4.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-4. del: Preiskave in meritve - Slabljenje (IEC 61300-3-4:2023)
Standard IEC 61300-3-4:2023 je na voljo kot SIST IEC 61300-3-4:2023, ki vsebuje mednarodni standard in njegovo različico z revizijami, ki prikazujejo vse spremembe tehnične vsebine v primerjavi s prejšnjo izdajo. Standard IEC 61300-3-4: 2022 opisuje različne metode, ki so na voljo za merjenje slabljenja optičnih komponent. Vendar se ne uporablja niti za meritve slabljenja naključnih spojitev, kot je opisano v standardih IEC 61300-3-34 in IEC 61300-3-45, niti za meritve slabljenja naprav za zgoščeno valovnodolžinsko multipleksiranje (DWDM), kot je opisano v standardu IEC 61300-3-29. Četrta izdaja razveljavlja in nadomešča tretjo izdajo, objavljeno leta 2012. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) dodana točka 3, ki vsebuje izraze, definicije, simbole in okrajšave izrazov;
b) dodana nova merilna metoda z virom svetlobe in merilnikom moči (LSPM), metoda vstavljanja (D);
c) dodan dodatek A, ki opisuje merjenje slabljenja večžilnega vlakna;
d) spremenjena referenčna preskusna metoda za vstavljanje C in alternativna preskusna metoda za zamenjavo ali vstavljanje D za merilnik moči in tip 4 DUT.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61300-3-4:2023
01-september-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-4. del: Preiskave in meritve - Slabljenje (IEC 61300-3-4:2023)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-4: Examinations and measurements - Attenuation
(IEC 61300-3-4:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-4: Untersuchungen und Messungen - Dämpfung (IEC 61300-3-
4:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 3-4: Examens et mesures -
Affaiblissement (IEC 61300-3-4:2023)
Ta slovenski standard je istoveten z: EN IEC 61300-3-4:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-3-4:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61300-3-4:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61300-3-4:2023
EUROPEAN STANDARD EN IEC 61300-3-4
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 33.180.20 Supersedes EN 61300-3-4:2013
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-4:
Examinations and measurements - Attenuation
(IEC 61300-3-4:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-4: Examens et mesures - 4: Untersuchungen und Messungen - Dämpfung
Affaiblissement (IEC 61300-3-4:2023)
(IEC 61300-3-4:2023)
This European Standard was approved by CENELEC on 2023-06-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-3-4:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61300-3-4:2023
EN IEC 61300-3-4:2023 (E)
European foreword
The text of document 86B/4656/FDIS, future edition 4 of IEC 61300-3-4, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-3-4:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-03-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-06-13
document have to be withdrawn
This document supersedes EN 61300-3-4:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-3-4:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61280-1-3 NOTE Approved as EN IEC 61280-1-3
IEC 61300-3-2 NOT
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.