SIST EN 3841-201:2005
(Main)Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection
Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection
This standard specifies a method of visual inspection for circuit breakers.
It shall be used together with EN 3841-100.
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 201: Sichtprüfung
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 201 : Contrôle d'aspect
La présente norme spécifie une méthode pour procéder au contrôle d'aspect des disjoncteurs.
Elle doit être utilisée conjointement avec EN 3841-100.
Aeronavtika - Odklopniki - Preskusne metode - 201. del: Vizualni pregled
General Information
- Status
- Published
- Publication Date
- 31-Mar-2005
- Technical Committee
- SS SPL - Technical Board for the general field
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Apr-2005
- Due Date
- 01-Apr-2005
- Completion Date
- 01-Apr-2005
Overview
EN 3841-201:2004 - "Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection" is a CEN-approved European standard that specifies a simple, repeatable method for visual inspection of aerospace circuit breakers. Intended to be used together with EN 3841-100 (General), this document defines the scope and basic requirements for non-magnified visual checks carried out during production, testing and after environmental exposure.
Key topics and requirements
- Inspection method
- Visual inspection shall be performed without magnification.
- Areas to inspect
- General appearance: surface finish, colour and overall assembly quality.
- Markings and inscriptions: conformity, legibility and quality of labels, part numbers and safety markings.
- Calibration seal: presence and undamaged condition of calibration or tamper-evident seals.
- Post-climatic inspection: after climatic or environmental tests, inspect for corrosion or poor legibility of markings.
- Reference
- Must be applied in conjunction with EN 3841-100, which provides general test-method requirements for the EN 3841 series.
Practical applications
- Production quality control
- Routine inspection of newly manufactured aerospace circuit breakers to confirm surface finish, assembly and marking integrity before release.
- Incoming inspection
- Verifying supplier parts during incoming goods checks to ensure conformity with labeling and seals.
- Environmental and post-test assessment
- Assessment after climatic, moisture or corrosion testing to detect deterioration in markings, seals or surfaces.
- MRO and in-service checks
- Maintenance, Repair and Overhaul (MRO) technicians and avionics inspectors use the visual method as a quick verification step during scheduled maintenance or troubleshooting.
- Procurement and certification
- Purchasing agents, quality assurance teams and certification bodies reference the standard to define acceptance criteria and inspection procedures.
Who uses this standard
- Aerospace manufacturers and component suppliers
- Quality assurance and inspection teams
- MRO organizations and avionics technicians
- Certification authorities and procurement departments
Related standards
- EN 3841-100 - Aerospace series – Circuit breakers – Test methods – Part 100: General (mandatory companion document)
- EN 3841 series (other parts) - additional test methods for circuit breakers in aerospace applications
EN 3841-201:2004 provides a concise, practical visual inspection routine that supports traceability, safety and conformance for aerospace circuit-breaker components. Keywords: EN 3841-201:2004, circuit breakers, visual inspection, aerospace test methods, calibration seal, markings, EN 3841-100.
Frequently Asked Questions
SIST EN 3841-201:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection". This standard covers: This standard specifies a method of visual inspection for circuit breakers. It shall be used together with EN 3841-100.
This standard specifies a method of visual inspection for circuit breakers. It shall be used together with EN 3841-100.
SIST EN 3841-201:2005 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3841-201:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2005
Aeronavtika - Odklopniki - Preskusne metode - 201. del: Vizualni pregled
Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 201: Sichtprüfung
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 201 : Contrôle d'aspect
Ta slovenski standard je istoveten z: EN 3841-201:2004
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 3841-201
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 49.060
English version
Aerospace series - Circuit breakers - Test methods - Part 201:
Visual inspection
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil
Partie 201 : Contrôle d'aspect 201: Sichtprüfung
This European Standard was approved by CEN on 10 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3841-201:2004: E
worldwide for CEN national Members.
Contents Page
Foreword.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...