iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50136-1-2:1999

(Main)

Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements for systems using dedicated alarm paths

Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements for systems using dedicated alarm paths

This standard specifies the requirements for alarm transmission systems utilising dedicated alarm transmission paths which are additional to those specified in EN 50136-1-1. The alarm transmission system may utilise wired links (e.g. DC or a modulated signal over a twisted pair cable), voice grade signaling links or data links and may include multiplexers or message processors. The standard is also applicable to alarm transmission systems in which signaling links are shared with other services. Such services include normal subscriber telephone line from the supervised premises to the local exchange, cable TV or power distribution networks, but is equally applicable to other systems

Alarmanlagen - Alarmübertragungsanlagen und -einrichtungen - Teil 1-2: Anforderungen an Anlagen mit fest zugeordneten Alarmübertragungswegen

Systèmes d'alarme - Systèmes et équipements de transmission d'alarme - Partie 1-2: Exigences relatives aux systèmes utilisant des voies d'alarme dédiées

Alarmni sistemi - Sistemi in oprema za prenos alarma - 1-2. del: Zahteve za sisteme, ki uporabljajo namenske poti za prenos alarmov

General Information

Status
Withdrawn
Publication Date
31-Aug-1999
Withdrawal Date
23-Nov-2014
ICS
13.320 - Alarm and warning systems
Technical Committee
EAL - Alarm systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Nov-2014
Due Date
14-Dec-2014
Completion Date
24-Nov-2014
Ref Project
EN 50136-1-2:1998 - Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements for systems using dedicated alarm paths

Relations

Replaced By
SIST EN 50136-1:2012 - Alarm systems - Alarm transmission systems - Part 1: General requirements for alarm transmission systems
Effective Date
07-Jun-2022
Replaced By
SIST EN 50136-1:2012 - Alarm systems - Alarm transmission systems - Part 1: General requirements for alarm transmission systems
Effective Date
01-Mar-2012
Replaced By
SIST EN 50136-1:2012 - Alarm systems - Alarm transmission systems - Part 1: General requirements for alarm transmission systems
Effective Date
28-Jan-2023

Buy Standard

EN 50136-1-2:1999EN 50136-1-2:1999
PreviousNext
Standard
EN 50136-1-2:1999
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50136-1-2:1999
01-september-1999
Alarmni sistemi - Sistemi in oprema za prenos alarma - 1-2. del: Zahteve za
sisteme, ki uporabljajo namenske poti za prenos alarmov
Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements
for systems using dedicated alarm paths
Alarmanlagen - Alarmübertragungsanlagen und -einrichtungen - Teil 1-2: Anforderungen
an Anlagen mit fest zugeordneten Alarmübertragungswegen
Systèmes d'alarme - Systèmes et équipements de transmission d'alarme - Partie 1-2:
Exigences relatives aux systèmes utilisant des voies d'alarme dédiées
Ta slovenski standard je istoveten z: EN 50136-1-2:1998
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST EN 50136-1-2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50518:2019/A1:2023(Amendment)
Monitoring and Alarm Receiving Centre
EN 50518:2019/A1:2023

This document specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution.
For the purpose of this document, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed firefighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems.
This document gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC.
The categorization is determined according to the type(s) of alarm messages handled.
Category I: ARCs handling messages from security applications:
- I&HAS’s;
- access control systems;
- VSS in security applications that require an emergency response (for example loss prevention);
- people monitoring, lone workers and object tracking systems for security applications;
- alarm messages handled by category II ARCs;
- combinations of the above systems.
Category II: ARC’s handling messages from non-security applications:
- fire alarm systems;
- fixed firefighting systems;
- social alarm systems;
- audio/video door entry systems;
- VSS in non-security applications (for example traffic flow);
- people monitoring, lone workers and object tracking systems for non-security applications;
- lifts emergency systems;
- combinations of the above systems.
The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site.
The document includes functional and specific requirements supporting the services of an ARC.
The document does NOT apply to:
- alarm systems used for non-civil purposes;
- alarm systems for medical or health applications.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50136-2:2013/A1:2023(Amendment)
Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT)
EN 50136-2:2013/A1:2023

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system.
These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications.
The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages.
The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards.
Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents.
This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62676-2-33:2022(Main)
Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols - Cloud uplink and remote management system access
EN IEC 62676-2-33:2022

This part of the IEC 62676 series specifies management systems interfaces and mechanism for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanism defined in this specification are not restricted to surveillance applications but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of scope of this specification.
Clause 4 introduces to remote management access. Clause 5 defines a set of requirements that the protocol needs to fulfil. Clause 6 extends the token-based resource-addressing scheme of the underlying specification IEC 60839-11-31. Clause 7 describes how to retrieve information about remote resources. Clause 8 defines how to connect to devices that are not directly reachable because they are e.g. located behind firewalls.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50136-10:2022(Main)
Alarm systems - Alarm transmission systems and equipment - Part 10: Requirements for remote access
CLC/TS 50136-10:2022

This document specifies minimum requirements for secure connection and session for remote access to one or more alarm systems, for example fire safety systems, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems, video surveillance systems, and social alarm systems.
This document specifies the requirements for the performance, reliability, integrity, and security characteristics of a Remote Access Infrastructure.
This document specifies the requirements for a Remote Access Infrastructure between a Remote Access Client and an alarm system at the supervised premises and may be either integrated as part of the ATS or a separate infrastructure. In either case, the requirements of this European technical specification should apply.
This document does not cover the provision of functions and features on the alarm system.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62820-1-1:2017/A11:2022(Amendment)
Building intercom systems - Part 1-1: System requirements - General
EN 62820-1-1:2016/A11:2021

IT NC submits to CLC TC79 the request for an amendment work of the EN 62820-1-1:2016, within CLC/TC 79/WG 15

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50131-2-2:2022(Main)
Alarm systems - Intrusion and hold-up systems - Part 2-2: Requirements for passive infrared detectors
EN 50131-2-2:2021

This document is for passive infrared detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131 1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130 5). This document does not include requirements for detectors intended for use outdoors.
The purpose of the detector is to detect the broad spectrum infrared radiation emitted by an intruder, to analyse the resulting signals and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system.
The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade.
Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions.
Requirements for system interconnections are not included in this document.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50131-2-3:2022(Main)
Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors
EN 50131-2-3:2021

This document is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This document does not include requirements for detectors intended for use outdoors.
The purpose of the detector is to emit microwave signals and analyse the signals that are returned to detect an intruder and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system.
The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade.
Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions.
Requirements for system interconnections are not included in this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60839-11-33:2021(Main)
Alarm and electronic security systems - Part 11-33: Electronic access control systems - Access control configuration based on web services
EN IEC 60839-11-33:2021

This part of IEC 60839 defines the Web services interface for electronic access control systems.
This includes listing electronic access control system components, their logical composition,
monitoring their states and controlling them. It also includes a mapping of mandatory and
optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex B.
This document applies to physical security only. Physical security prevents unauthorized
personnel, attackers or accidental intruders from physically accessing a building, room, etc.
Web services usage and device management functionality are outside the scope of this
document. Refer to IEC 60839-11-31:2016 for more information.
This document does not in any way limit a manufacturer to add other protocols or extend the
protocol defined here. For rules on how to accomplish this, refer to IEC 60839-11-31:2016.

  • Standard
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50134-5:2021(Main)
Alarm systems - Social alarm systems - Part 5: Interconnections and communications
EN 50134-5:2021

This document specifies the minimum requirements for the performance, reliability and security characteristics of interconnections, alarm transmission systems and communications within a social alarm system.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50131-6:2018/A1:2021(Amendment)
Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
EN 50131-6:2017/A1:2021

This European Standard specifies the requirements, performance criteria and testing procedures for PS to be used as part of Intrusion and Hold up Alarm Systems. The PS will either be an integral part of an I&HAS component or stand-alone. The control functions of the PS may be incorporated as part of the PS device, or may be provided by another I&HAS component, e.g. a CIE.
This European Standard is not applicable when the PS requirements for I&HAS components are included within the relevant product standard.
The requirements correspond to each of the four security grades given in the European Standard EN 50131 1, Alarm Systems – Intrusion and Hold-Up Systems - Part 1: System requirements. Requirements are also given for four environmental classes covering applications in indoor and outdoor locations.
This standard covers:
a)   mandatory functions which will be provided on all PS; and
b)   optional functions which may be provided.
This European Standard does not deal with requirements for compliance with EC regulatory Directives, such as the EMC Directive, Low Voltage Directive, etc. except that it specifies the equipment operating conditions and reduced functional test for EMC susceptibility testing as required by EN 50130 4.
Other functions associated with I&HAS not specified in this standard may be provided. Such functions will not affect the requirements of any mandatory or optional functions.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day