oSIST prEN IEC 61810-7-17:2023

SLOVENSKI STANDARD
01-oktober-2023
Električni releji - Preskusi in meritve - 7-17. del: Udar, pospešek in vibracije
Electrical relays - Tests and Measurements - Part 7-17: Shock, Acceleration and
Vibration
Relais électriques - Essais et mesurages - Partie 7-17: Chocs, accélération et vibrations
Ta slovenski standard je istoveten z: prEN IEC 61810-7-17:2023
ICS:
29.120.70 Releji Relays
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

94/921/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-17 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-08-18 2023-11-10
SUPERSEDES DOCUMENTS:
94/813/CD, 94/908/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrical relays – Tests and Measurements – Part 7-17: Shock, Acceleration and Vibration

PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

– 2 – IEC CDV 61810-7-17:2023 © IEC:2023
1 CONTENTS
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 6
7 4 Test procedure . 7
8 4.1 General . 7
9 4.1.1 General purpose . 7
10 4.1.2 General conditions . 7
11 4.2 Shock . 7
12 4.2.1 Purpose . 7
13 4.2.2 Procedure . 7
14 4.2.3 Conditions . 8
15 4.3 Acceleration . 9
16 4.3.1 Purpose . 9
17 4.3.2 Procedure . 9
18 4.3.3 Conditions . 9
19 4.4 Vibration . 10
20 4.4.1 Purpose . 10
21 4.4.2 Procedure . 10
22 4.4.3 Conditions . 11
23 5 Evaluation . 12
24 Annex A (informative)  Definition of test axes . 13
25 Annex B (informative)  Vibration and shock tests of special requirements for
26 applications . 14
27 Annex T (informative)  Test report. 15
28 Bibliography . 16
30 Figure A.1 – Example of cartesian coordinate system to define the three mutually
31 perpendicular test axes on the DUT . 13
33 Table 1 – Evaluation of DUT properties after shock, acceleration and/or vibration test . 12
IEC CDV 61810-7-17:2023 © IEC:2023 – 3 –
39 INTERNATIONAL ELECTROTECHNICAL COMMISSION
40 ____________
42 ELECTRICAL RELAYS – TESTS AND MEASUREMENTS
44 Part 7-17: Shock, Acceleration and Vibration
47 FOREWORD
48 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
49 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
50 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
51 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
52 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
53 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
54 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
55 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
56 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
57 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
58 consensus of opinion on the relevant subjects since each technical committee has representation from all
59 interested IEC National Committees.
60 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
61 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
62 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
63 misinterpretation by any end user.
64 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
65 transparently to the maximum extent possible in their national and regional publications. Any divergence between
66 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
67 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
68 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
69 services carried out by independent certification bodies.
70 6) All users should ensure that they have the latest edition of this publication.
71 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
72 members of its technical committees and IEC National Committees for any personal injury, property damage or
73 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
74 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
75 Publications.
76 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
77 indispensable for the correct application of this publication.
78 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
79 rights. IEC shall not be held responsible for identifying any or all such patent rights.
80 IEC 61810-7 has been prepared by subcommittee WG3: Maintenance of basic relay standards,
81 of IEC technical committee 94: All-or-nothing electrical relays. It is an International Standard.
82 The text of this International Standard is based on the following documents:
CD CC
94/813/CD 94/908/CC
84 Full information on the voting for its approval can be found in the report on voting indicated in
85 the above table.
86 The language used for the development of this International Standard is English.
87 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
88 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available

– 4 – IEC CDV 61810-7-17:2023 © IEC:2023
89 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
90 described in greater detail at http://www.iec.ch/standardsdev/publications.
91 A list of all parts of IEC 61810 series, published under the general title Electromechanical
92 elementary relays, can be found on the IEC website.
93 This International Standard is to be used in conjunction with IEC 61810-1:2015.
94 The committee has decided that the contents of this document will remain unchanged until the
95 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
96 specific document. At this date, the document will be
97 • reconfirmed,
98 • withdrawn,
99 • replaced by a revised edition, or
100 • amended.
IEC CDV 61810-7-17:2023 © IEC:2023 – 5 –
103 ELECTRICAL RELAYS – TESTS AND MEASUREMENTS
105 Part 7-17: Shock, Acceleration and Vibration
109 1 Scope
110 This part of IEC 61810-7 is used for testing all kind of relays within the scope of technical
111 committee 94 and shall evaluate their ability to perform under expected conditions of
112 transportation, storage and all aspects of operational use.
113 The tests stated here within shall be done with test conditions and appropriate severities, as
114 well as suitable measurements conditions.
115 The object of this test is to define a standard test method to ensure that the DUT performs
116 satisfactorily at its specified energization values throughout the defined temperature range.
117 The standard is to prove the capability of the DUT to function during and/or after several stress
118 situations, that may occur in service, during handling or during transportation. This part
119 comprises test procedures to simulate shock impacts, steady acceleration environments (such
120 as moving vehicles, aircraft and projectiles) as well as vibration conditions.
121 Those procedures provide evidence about the structural integrity of DUTs and their
122 electromechanical design robustness. Based on the chosen test severity, the procedures may
123 also be used to deliberately reveal mechanical weaknesses of DUTs and allow grouping of parts
124 acc. to their stress resistance levels.
125 The tests are mainly intended for specimen without packaging. However, if the packaging is
126 considered an essential part of the specimen, then certain tests like shock tests may be carried
127 out with packaging as well.
129 2 Normative references
130 The following documents are referred to in the text in such a way that some or all of their content
131 constitutes requirements of this document. For dated references, only the edition cited applies.
132 For undated references, the latest edition of the referenced document (including any
133 amendments) applies.
134 IEC 60068-2-6, Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
135 IEC 60068-2-7, Basic environmental testing procedures - Part 2-7: Tests - Test Ga and
136 guidance: Acceleration, steady state
137 IEC 60068-2-27, Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
138 IEC 60068-2-64, Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband
139 random and guidance
140 IEC 61810-1:2015, Electromechanical elementary relays – Part 1: General and safety
141 requirements
– 6 – IEC CDV 61810-7-17:2023 © IEC:2023
142 IEC 61810-1:2015/AMD1:2019, Amendment 1 - Electromechanical elementary relays - Part 1:
143 General and safety requirements
144 IEC 61810-7-0, All-or-nothing relays – Tests and measurements – Part 7-0: Testing – General
145 and Guidance
146 IEC 61810-7-1, All-or-nothing relays – Te
...