SIST EN ISO 17701:2016
(Main)Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)
Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)
ISO 17701:2016 discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact to adhesives which are used to bond them.
Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Farbmigration (ISO 17701:2016)
Diese Internationale Norm legt ein Prüfverfahren zur Bestimmung der Neigung eines Werkstoffs, bei Aufbewahrung in engem Kontakt mit einem anderen Werkstoff bei diesem eine Verfärbung hervorzurufen, fest. Dieses Verfahren gilt für alle Werkstoffe, die in engem Kontakt mit Klebstoffen verwendet werden, die für deren Kleben verwendet werden.
Chaussures - Méthodes d'essai des tiges, de la doublure et des garnitures intérieures - Migration de la couleur (ISO 17701:2016)
ISO 17701:2016 spécifie une méthode d'essai permettant de déterminer la propension d'un matériau à provoquer la décoloration d'un autre matériau, lorsqu'ils sont stockés en contact étroit. Cette méthode est applicable à tous les matériaux qui sont utilisés en contact direct avec des adhésifs destinés à les assembler.
Obutev - Preskusne metode za zgornje dele, podloge in vložke - Migracija barve (ISO 17701:2016)
Ta evropski standard določa preskusno metodo za določanje nagnjenosti materiala k razbarvanju drugega materiala pri skupnem shranjevanju. Ta metoda se uporablja za vse materiale, ki se uporabljajo v tesnem stiku, in za lepila, s katerimi so zlepljeni.
General Information
- Status
- Published
- Public Enquiry End Date
- 13-Mar-2016
- Publication Date
- 06-Jun-2016
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 31-May-2016
- Due Date
- 05-Aug-2016
- Completion Date
- 07-Jun-2016
Relations
- Replaces
SIST EN 13517:2004 - Footwear - Test methods for uppers, lining and insocks - Colour migration - Effective Date
- 25-May-2016
- Revised
SIST EN 13517:2004 - Footwear - Test methods for uppers, lining and insocks - Colour migration - Effective Date
- 01-Mar-2016
Overview
EN ISO 17701:2016 defines a standardised test method to determine the propensity of footwear materials to cause colour migration (discolouration) when stored in intimate contact. Applicable to uppers, linings, insocks and to adhesives used in bonding, the method evaluates colour transfer and change under controlled pressure, temperature and time.
This second edition (2016) replaces the 2003 edition and is endorsed by CEN as EN ISO 17701:2016. The test is intended for material selection, production quality control and conformity assessment in footwear manufacturing.
Key Topics
- Scope and purpose: Assess discolouration caused by movement of colour from one material to another and the effect of adhesives or laminates.
- Apparatus and materials:
- Knife for cutting specimens.
- Two smooth glass plates (minimum 70 mm × 70 mm, ~50 g ± 5 g each).
- Additional mass sized to produce a contact pressure of 5.2 kPa ± 0.5 kPa (mass adjusted for specimen area).
- Oven without a window, maintained at 60 °C ± 2 °C.
- Calibrated colorimeter for CIE/CIELAB measurements and grey scales for visual assessment (ISO 105-A02, ISO 105-A03).
- Artificial lighting or north daylight for visual assessment.
- Sampling and conditioning:
- Store materials in a standard conditioned atmosphere (ISO 18454) for at least 24 h prior to testing.
- Typical specimen sizes: 30 mm × 20 mm for material-to-material tests; 50 mm × 50 mm for adhesive or laminate tests.
- Test procedure:
- Place specimens in intimate contact between glass plates, apply the calculated mass to achieve specified pressure, and store in the dark at 60 °C.
- Measure colour (CIE values) before exposure and after exposures of 24 h increments up to a total of 7 days.
- Assess colour change and staining using CIE measurements and grey scale ratings; record descriptions of colour, intensity and uniformity.
Applications
- Quality control in footwear manufacturing to prevent unwanted staining or colour transfer between components.
- Material selection for uppers, linings, insocks and adhesives to ensure compatibility and durability in service.
- Supplier verification and incoming inspection to reduce returns and warranty claims due to discolouration.
- Regulatory and conformity testing where product appearance and performance are specified.
Related Standards
EN ISO 17701 references and aligns with other colorfastness and footwear standards, including:
- ISO 105-A01, ISO 105-A02, ISO 105-A03 (textile colourfastness and grey scales)
- ISO 18454 (standard atmospheres for conditioning and testing of footwear)
- ISO 19952 (footwear vocabulary)
- CIE 15 (colorimetry)
For test reports, include specimen descriptions, exposure times, CIE measurements, grey scale ratings and qualitative descriptions of any transfer or loss of colour. This ensures reproducible results and supports material compatibility decisions in footwear production.
Frequently Asked Questions
SIST EN ISO 17701:2016 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)". This standard covers: ISO 17701:2016 discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact to adhesives which are used to bond them.
ISO 17701:2016 discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact to adhesives which are used to bond them.
SIST EN ISO 17701:2016 is classified under the following ICS (International Classification for Standards) categories: 61.060 - Footwear. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 17701:2016 has the following relationships with other standards: It is inter standard links to SIST EN 13517:2004, SIST EN 13517:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 17701:2016 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2016
1DGRPHãþD
SIST EN 13517:2004
Obutev - Preskusne metode za zgornje dele, podloge in vložke - Migracija barve
(ISO 17701:2016)
Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO
17701:2016)
Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Farbmigration (ISO
17701:2016)
Chaussures - Méthodes d'essai des tiges, de la doublure et des garnitures intérieures -
Migration de la couleur (ISO 17701:2016)
Ta slovenski standard je istoveten z: EN ISO 17701:2016
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17701
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 61.060 Supersedes EN 13517:2001
English Version
Footwear - Test methods for uppers, lining and insocks -
Colour migration (ISO 17701:2016)
Chaussures - Méthodes d'essai des tiges, de la doublure Schuhe - Prüfverfahren für Obermaterialien, Futter und
et des premières de propreté - Migration de la couleur Decksohlen - Farbmigration (ISO 17701:2016)
(ISO 17701:2016)
This European Standard was approved by CEN on 15 April 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17701:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 17701:2016) has been prepared by Technical Committee ISO/TC 216
“Footwear” in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by AENOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 13517:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17701:2016 has been approved by CEN as EN ISO 17701:2016 without any modification.
INTERNATIONAL ISO
STANDARD 17701
Second edition
2016-05-01
Footwear — Test methods for uppers,
lining and insocks — Colour migration
Chaussures — Méthodes d’essai des tiges, de la doublure et des
premières de propreté — Migration de la couleur
Reference number
ISO 17701:2016(E)
©
ISO 2016
ISO 17701:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 17701:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and material . 1
5 Sampling and conditioning . 2
5.1 Testing for colour migration between materials . 2
5.2 Testing for the effect of adhesives . 2
5.3 Testing for the effect of adhesives in laminate . 2
5.4 Testing components such as soling . 3
6 Test method . 3
6.1 Principle . 3
6.2 Procedure . 3
7 Test report . 4
ISO 17701:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...