SIST EN 4890:2022/A1:2024
(Amendment)Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
This European Standard specifies the requirements relating to:
Steel X4CrNiMo16-5-1
Air melted
Hardened and tempered
Sheets and plates
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.
ASD-STAN designation: FE-PM 3504.
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 - Lufterschmolzen - Gehärtet und angelassen - Bleche und Platten - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Diese Europäische Norm legt die Anforderungen an:
Stahl X4CrNiMo16-5-1
Lufterschmolzen
Gehärtet und angelassen
Bleche und Platten
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
ASD STAN-Werkstoffbezeichnung: FE-PM 3504.
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à l'air - Trempé et revenu - Tôles et plaques - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
No scope available
Aeronavtika - Jeklo X4CrNiMo16-5-1 - Taljeno na zraku - Utrjeno in mehko žarjeno - Pločevina in plošče - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4890:2022/oprA1:2023
01-september-2023
Aeronavtika - Jeklo X4CrNiMo16-5-1 - Taljeno na zraku - Utrjeno in mehko žarjeno -
Pločevina in plošče - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa - Dopolnilo
A1
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered -
Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 - Lufterschmolzen - Gehärtet und
angelassen - Bleche und Platten - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à l'air - Trempé et revenu - Tôles et
plaques - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Ta slovenski standard je istoveten z: EN 4890:2022/prA1
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
SIST EN 4890:2022/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 4890:2022/oprA1:2023
SIST EN 4890:2022/oprA1:2023
DRAFT
EUROPEAN STANDARD
EN 4890:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2023
ICS 49.025.10
English Version
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted -
Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤
50 mm - 900 MPa ≤ R ≤ 1 050 MPa
m
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 -
Lufterschmolzen - Gehärtet und angelassen - Bleche
l'air - Trempé et revenu - Tôles et plaques - 0,3 mm ≤ a
und Platten - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ R ≤ 1
≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa m
050 MPa
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-STAN.
This draft amendment A1, if approved, will modify the European Standard EN 4890:2022. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the respons
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.