iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 13427:1999

(Main)

Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998)

Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998)

This standard specifies a test method for the determination of the resistance of geotextiles to abrasion using a sliding block. After abrasion the loss in tensile properties is determined. The method is applicable to woven and nonwoven geotextiles and geotextile-related products.

Geotextilien und geotextilverwandte Produkte - Simulation von Scheuerbeschädigungen (Gleitblockprüfung) (ISO 13427:1998)

Diese Norm legt beschreibt ein Verfahren zur Bestimmung der Widerstandsfähigkeit von Geotextilien gegen Scheuerbeanspruchung mit einem Scheuerprüfgerät fest. Nach der Scheuerbeanspruchung wird der Verlust der Zugfestigkeitseigenschaften bestimmt. Das Verfahren ist auf gewebte und nichtgewebte Geotextilien und geotextilverwandte Produkte anwendbar.

Géotextiles et produits apparentés - Simulation de l'endommagement par abrasion (essai du bloc glissant) (ISO 13427:1998)

La présente norme établit une méthode d'essai qui permet de déterminer la résistance a l'abrasion des géotextiles a l'aide d'un bloc glissant. La perte des propriétés en traction apres abrasion est déterminée. La méthode est applicable aux géotextiles tissés et nontissés et aux produits apparentés.

Geotekstilije in geotekstilijam sorodni izdelki - Simuliranje poškodb z drgnjenjem (preskus z drsečim blokom) (ISO 13427:1998)

General Information

Status
Withdrawn
Publication Date
28-Feb-1999
Withdrawal Date
19-Jan-2015
ICS
59.080.70 - Geotextiles
Technical Committee
ITEK - Textile and textile products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Jan-2015
Due Date
11-Feb-2015
Completion Date
20-Jan-2015
Directive
89/106/EEC - Construction products
Ref Project
EN ISO 13427:1998 - Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998)

Relations

Replaced By
SIST EN ISO 13427:2015 - Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)
Effective Date
01-Mar-2015
Replaced By
SIST EN ISO 13427:2015 - Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 13427:1999EN ISO 13427:1999
PreviousNext
Standard
EN ISO 13427:1999
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13427:1999
01-marec-1999
*HRWHNVWLOLMHLQJHRWHNVWLOLMDPVRURGQLL]GHONL6LPXOLUDQMHSRãNRGE]GUJQMHQMHP
SUHVNXV]GUVHþLPEORNRP  ,62
Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block
test) (ISO 13427:1998)
Geotextilien und geotextilverwandte Produkte - Simulation von Scheuerbeschädigungen
(Gleitblockprüfung) (ISO 13427:1998)
Géotextiles et produits apparentés - Simulation de l'endommagement par abrasion
(essai du bloc glissant) (ISO 13427:1998)
Ta slovenski standard je istoveten z: EN ISO 13427:1998
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 13427:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17738:2023(Main)
Geotextiles and Geotextile related products - Damage during installation procedure - Full scale test
EN 17738:2023

This document describes a procedure for producing mechanical damage to geotextiles and geotextile-
related products due only to compaction of soil or other materials. The damage is assessed visually and
by the loss of tensile strength or other reference tests used to assess the damage caused by this procedure.
The method described is a full-scale test procedure, using a range of fills and compaction methods, and
for the derivation of a reduction factor for installation damage for geotextiles and geotextile-related
products.
This document excludes geosynthetic barriers and products used in pavements and asphalt overlays.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16416:2023(Main)
Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
EN 16416:2023

This European Standard describes an index test method that covers laboratory measurement of water flux through saturated clay geosynthetic barrier (GBR-C) specimens using a flexible wall permeameter at constant head.
This test method is applicable to GBR-C products with no additional sealing layers attached.
This test method provides a measurement of flux under a prescribed set of conditions that can be used for manufacturing quality control. The test method can also be used to check conformance.
The flux value determined using this test method is not considered to be representative of the in-service flux of a GBR-C.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12447:2021(Main)
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
EN 12447:2021

This European Standard specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to hydrolysis by exposing test specimens to water at elevated temperatures, followed by an evaluation of the changes in properties resulting from such exposure. It is intended as a means of establishing a minimum acceptable level of durability.
The test is applicable to any geotextile and geotextile-related product susceptible to hydrolysis, in particular polyester and polyamide based materials, and in addition to the yarns from which these geotextiles are made. Reinforcing materials shall be tested without the coating and manufacturers shall ensure that the degradation of the coating will not attack or have any negative influence on the degradation of the yarns.
This method is not intended for determining the resistance of geotextiles to hydrolysis under highly acid or alkaline conditions.
NOTE   Performance tests to predict long-term lifetime or to compare products of different polymers or of similar polymers with differing structures can be based on the same method but with a wider range of temperatures and durations.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25619-1:2021(Main)
Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021)
EN ISO 25619-1:2021

This document specifies index test methods for determining the compressive creep properties of
geosynthetic products. The test specimens are subjected either to normal compressive loading or to a
combination of normal compressive loading and shear loading.
The test method with a normal load only (see Clause 5) is the standard method.
The test method in which combined normal and shear loads are applied (see Clause 6) is intended for
products that are sensitive to shear failure, i.e. which have a columnar or cuspated structure.
The tests are carried out on dry specimens or on specimens immersed in water. The test is intended
to be carried out with the specimen immersed in water when any part of the geosynthetic product
contains a hydrophilic polymer.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17445:2021(Main)
Geosynthetics - Standard test for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products
CEN/TS 17445:2021

This specific test serves to determine the protective effect of different geosynthetics against water erosion by heavy rain. The test is performed in a laboratory apparatus and the results serve as a performance test.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12225:2021(Main)
Geosynthetics - Method for determining the microbiological resistance by a soil burial test
EN 12225:2020

This standard specifies a method for the determination of the microbiological resistance of geotextiles and geotextile-related products by a soil burial test. It does not specify for which products or in which applications the soil burial test is required. Further reference should be made to CR ISO 13434.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12958-1:2021(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test (ISO 12958-1:2020)
EN ISO 12958-1:2020

This document specifies a method for determining the constant-head water flow capacity within the
plane of a geotextile or geotextile-related product. This document describes the in-plane water flow
index test, only applicable to factory-assembled products. For the in-plane water flow performance test,
see ISO 12958-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12958-2:2021(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test (ISO 12958-2:2020)
EN ISO 12958-2:2020

This document specifies a method for determining the constant-head water flow capacity within the
plane of a geotextile or geotextile-related product, using boundary materials and test conditions of
interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic
gradients, seating times and an array of normal loads.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12960:2020(Main)
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO 12960:2020)
EN ISO 12960:2020

This standard specifies methods for screening the resistance of geotextile products to liquids while not subjecting them to external mechanical stress.
The standard is applicable to all geotextiles and geotextile related products.
Method A applies particularly to polyamides and method B to polyesters and polyamides. The test results should be interpreted in the context of site conditions.
NOTE This standard only considers conditions where the specimens are fully immersed in the liquids. Though outside the scope of this standard, the test conditions may be modified to accommodate particular applications, e.g. gaseous media. This standard does not preclude use for test specimens that are pre-treated by some method, e.g. by weathering, aqueous extraction conditions or installation damage.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17323:2020(Main)
Geosynthetics - Determination of tensile properties of Polymeric Geosynthetic Barriers
EN 17323:2020

This document specifies test methods for the determination of tensile properties of polymeric geosynthetic barriers (PE (PEHD and PELLD, FPO (EVA, FPP, and PEVLD), PVC-P and EPDM).
Method A is suitable for testing polymeric geosynthetic barriers (GBRP), PVC, EPDM and FPO (EVA, FPP and PEVLD), non-reinforced (including 80gsm glass fleece) and without backing.
Method B is suitable for testing polymeric geosynthetic barriers (GBRP), PE (HDPE and PELLD), non-reinforced and without backing.
Method C is suitable for testing polymeric geosynthetic barriers (GBRP), reinforced and/or with  backing.
Method D is suitable for measuring modulus (if required) of all non-reinforced products.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day