SIST EN 60317-0-1:2014/kFprA2:2026
(Amendment)Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
General Information
- Abstract
- Status
- Not Published
- Public Enquiry End Date
- 31-Jul-2025
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 5020 - Formal vote (FV) (Adopted Project)
- Start Date
- 02-Jun-2026
- Due Date
- 21-Jul-2026
- Completion Date
- 09-Jun-2026
Overview
SIST EN 60317-0-1:2014/kFprA2:2026 is an amendment to the European standard defining general requirements for enamelled round copper wire, a critical component in winding wire applications. Published by CLC, this standard is harmonized with the international IEC 60317-0-1 series. As a versatile standard, it applies to manufacturers and purchasers of electrical winding wires used in motors, transformers, and other electrical equipment. The amendment clarifies key electrical resistance and breakdown voltage requirements, ensuring consistent product quality and reliable performance in electrical and electromechanical systems.
Key Topics
- Enamelled Round Copper Wire: Details performance requirements and test methods for copper wire coated with an insulating enamel, utilized in electrical winding applications.
- Electrical Resistance: Sets criteria for measuring and agreeing upon electrical resistance, especially for wires with nominal conductor diameters over 0.280 mm. Resistance at 20 °C must comply with specified limits, fostering dependable electrical performance.
- Breakdown Voltage: Defines minimum breakdown voltage values at room temperature for different grades and sizes of enamelled copper wire. Two comprehensive tables (Tables 8 and 9) specify requirements for both preferred and intermediate nominal conductor diameters up to 0.500 mm.
- Grades and Dimensions: Covers requirements for different grades and wire sizes, with updated tables replacing earlier versions to enhance clarity and reliability.
- Amendment Scope: This amendment refines and updates values in key technical tables, supporting accurate specification and testing practices.
Applications
SIST EN 60317-0-1:2014/kFprA2:2026 is essential for a wide spectrum of industries that rely on quality winding wires:
- Transformers: Used in power and distribution transformers where electric insulation and consistent performance are paramount.
- Electric Motors and Generators: Critical for motor windings, ensuring durability under thermal and mechanical stress.
- Automotive Industry: Applied in starter motors, alternators, and other electric vehicle components requiring reliable copper winding wire.
- Domestic Appliances & Electronics: Used in compressors, relays, inductors, and small devices, making standardized wire performance vital.
- Test and Quality Assurance: Provides benchmarks for manufacturers and third-party labs to validate product conformity to electrical resistance and breakdown voltage parameters.
Integrating this standard into procurement and production processes ensures enhanced product reliability, compatibility, and safety across international markets. It also simplifies communications between suppliers and buyers, especially for custom resistance measurements or specific diameter requirements.
Related Standards
For a holistic approach to winding wire specification and quality control, consider referencing the following related standards:
- EN 60317-0-1 (Base Standard): General requirements for winding wires, forming the foundation for all amendments and parts in the 60317 series.
- EN IEC 60317 Series: Includes additional standards covering different conductor shapes, insulation types, and material requirements.
- IEC 60851 Series: Specifies test methods for winding wires, including methods for verifying compliance with resistance and voltage standards.
- EN 60228: Relates to conductors of insulated cables, providing complementary technical specifications.
By adhering to SIST EN 60317-0-1:2014/kFprA2:2026 and its related standards, organizations ensure their winding wires meet rigorous safety, performance, and interoperability requirements demanded by the modern electrical and electronics industries. This supports streamlined global trade and the long-term reliability of electrical equipment.
Relations
- Effective Date
- 04-Jul-2023
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
IMQ S.p.A. (Certification)
Italian electrical product certification.
SLG Prüf- und Zertifizierungs GmbH
German testing and certification body.
Sponsored listings
Frequently Asked Questions
SIST EN 60317-0-1:2014/kFprA2:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire". This standard covers: Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
SIST EN 60317-0-1:2014/kFprA2:2026 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires; 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60317-0-1:2014/kFprA2:2026 has the following relationships with other standards: It is inter standard links to SIST EN 60317-0-1:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60317-0-1:2014/kFprA2:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60317-0-1:2014/oprA2:2025
01-julij-2025
Specifikacije za posebne vrste navijalnih žic - 0-1. del: Splošne zahteve -
Prevlečena okrogla bakrena žica - Dopolnilo A2
Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General
requirements - Enamelled round copper wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-1:
Allgemeine Anforderungen - Runddrähte aus Kupfer, lackisoliert
Amendement 2 - Spécifications pour types particuliers de fils de bobinage - Partie 0-1:
Exigences générales - Fil de section circulaire en cuivre émaillé
Ta slovenski standard je istoveten z: EN 60317-0-1:2014/prA2:2025
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
SIST EN 60317-0-1:2014/oprA2:2025 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 60317-0-1:2014/oprA2:2025
SIST EN 60317-0-1:2014/oprA2:2025
55/2067/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60317-0-1/AMD2 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-06-13 2025-09-05
SUPERSEDES DOCUMENTS:
55/2060/CD, 55/2063/CC
IEC TC 55 : WINDING WIRES
SECRETARIAT: SECRETARY:
United States of America Mr Mike Leibowitz
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
TC 2
ASPECTS CONCERNED:
Safety
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General
requirements - Enamelled round copper wire
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
SIST EN 60317-0-1:2014/oprA2:2025
IEC 60317-0-1/AMD2 ED4 - 2 - 55/2067/CDV
© IEC 2025
2 FOREWORD
3 This amendment to International Standard IEC 60317-0-1 has been prepared by IEC technical
4 committee 55: Winding wires.
5 The text of this amendment is based on the following documents:
FDIS Report on voting
55/XX/FDIS 55/XX/RVD
7 Full information on the voting for the approval of this amendment can be found in the report on
8 voting indicated in the above table.
9 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
10 A list of all parts in the IEC 60317 series, published under the general title Specifications for
11 particular types of winding wires, can be found on the IEC website.
12 The committee has decided that the contents of this amendment and the base publication will
13 remain unchanged until the stability date indicated on the IEC website under
14 "http://webstore.iec.ch" in the data related to the specific publication. At this date, the
15 publication will be
16 • reconfi
...