Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)

Subsea pipelines (or flow lines) and subsea structures usually need to be thermally
insulated to avoid, for instance, hydrate formation.
Such coatings are commercially available and fall into the following general families:
- Polypropylene
- Polyurethane
- Epoxy and phenolic
- Rubber
At the moment, no national or international standard addresses these types of coatings.
Only company specifications are dealing with that issue. These coatings are more and
more being used for the offshore deep sea developments, and we strongly believe there is a need now for international standardization on the subject to ensure the whole industry with a minimum level of quality, since we see cases of premature failures of such coating systems.

Erdöl- und Erdgasindustrie - Unterwasser - Wärmedämmungsschicht für Rohrleitungen, Vorlauf, Zubehör und Unterwasserkonstruktionen (ISO 12736:2014)

Industries du pétrole et du gaz naturel - Revêtements pour isolation thermique de canalisations et équipements sous marins (ISO 12736:2014)

L'ISO 12736:2014 définit les exigences minimales relatives à la qualification, à l'application, à la gestion des essais, au stockage et au transport des systèmes d'isolation thermique en milieu humide, neufs et existants, pour canalisations, conduites d'écoulement, équipements et structures sous-marines dans les industries du pétrole et du gaz naturel. Ces systèmes ont pour but d'assurer une protection contre la corrosion externe et une isolation thermique.
L'ISO 12736:2014 s'applique aux systèmes d'isolation thermique en milieu humide immergés dans l'eau de mer.
L'ISO 12736:2014 ne s'applique pas à l'isolation thermique de l'espace annulaire des systèmes de canalisations à double enveloppe en acier.

Industrija za predelavo nafte in zemeljskega plina - Mokre toplotne izolacijske prevleke za naftovode, dovodne cevi, opremo in podvodne konstrukcije (ISO 12736:2014)

Podvodne naftovode (ali dovodne cevi) in podvodne konstrukcije je običajno treba toplotno
izolirati, da se na primer prepreči nastajanje hidrata.
Take prevleke so na voljo na tržišču in spadajo v naslednje splošne družine:
– polipropilen
– poliuretan
– epoksi in fenol
– guma
V tem trenutku noben nacionalni ali mednarodni standard ne obravnava teh vrst prevlek.
To vprašanje obravnavajo le specifikacije družb. Te prevleke se vse
pogosteje uporabljajo pri dejavnostih na odprtem morju, zato menimo, da je zdaj čas za mednarodno standardizacijo tega vprašanja, da se celotni industriji zagotovi minimalna raven kakovosti, saj smo priča prezgodnjim okvaram takih prevlek.

General Information

Status
Withdrawn
Public Enquiry End Date
24-Jan-2012
Publication Date
12-Feb-2015
Withdrawal Date
19-Oct-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Oct-2023
Due Date
12-Nov-2023
Completion Date
20-Oct-2023

Relations

Buy Standard

Standard
EN ISO 12736:2015
English language
83 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 12736:2012
English language
86 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12736:2015
01-marec-2015
Industrija za predelavo nafte in zemeljskega plina - Mokre toplotne izolacijske
prevleke za naftovode, dovodne cevi, opremo in podvodne konstrukcije (ISO
12736:2014)
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow
lines, equipment and subsea structures (ISO 12736:2014)
Erdöl- und Erdgasindustrie - Unterwasser - Wärmedämmungsschicht für Rohrleitungen,
Vorlauf, Zubehör und Unterwasserkonstruktionen (ISO 12736:2014)
Industries du pétrole et du gaz naturel - Revêtements pour isolation thermique de
canalisations et équipements sous marins (ISO 12736:2014)
Ta slovenski standard je istoveten z: EN ISO 12736:2014
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
SIST EN ISO 12736:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12736:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 12736:2015

EUROPEAN STANDARD
EN ISO 12736

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 25.220.20; 75.180.10
English Version
Petroleum and natural gas industries - Wet thermal insulation
coatings for pipelines, flow lines, equipment and subsea
structures (ISO 12736:2014)
Industries du pétrole et du gaz naturel - Revêtements pour Erdöl- und Erdgasindustrie- Wärmedämmschicht für
isolation thermique humide de canalisations, lignes Rohrleitungen, Vorlauf, Zubehör und
d'écoulement et structures sous-marines (ISO 12736:2014) Unterwasserkonstruktionen (ISO 12736:2014)
This European Standard was approved by CEN on 8 November 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12736:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12736:2015
EN ISO 12736:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 12736:2015
EN ISO 12736:2014 (E)
Foreword
This document (EN ISO 12736:2014) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at
the latest by June 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia,
...

SLOVENSKI STANDARD
oSIST prEN ISO 12736:2012
01-januar-2012
Industrija za predelavo nafte in zemeljskega plina - Mokre toplotne izolacijske
prevleke za naftovode, dovodne cevi, opremo in podvodne konstrukcije (ISO/DIS
12736:2011)
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow
lines, equipment and subsea structures (ISO/DIS 12736:2011)
Erdöl- und Erdgasindustrie - Unterwasser - Wärmedämmungsschicht für Rohrleitungen,
Vorlauf, Zubehör und Unterwasserkonstruktionen (ISO/DIS 12736:2011)
Industries du pétrole et du gaz naturel - Revêtements pour isolation thermique de
canalisations et équipements sous marins (ISO/DIS 12736:2011)
Ta slovenski standard je istoveten z: prEN ISO 12736
ICS:
25.220.01 Površinska obdelava in Surface treatment and
prevleke na splošno coating in general
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
oSIST prEN ISO 12736:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12736:2012

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12736:2012


EUROPEAN STANDARD
DRAFT
prEN ISO 12736
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2011
ICS 25.220.20; 75.180.10
English Version
Petroleum and natural gas industries - Wet thermal insulation
coatings for pipelines, flow lines, equipment and subsea
structures (ISO/DIS 12736:2011)
Industries du pétrole et du gaz naturel - Revêtements pour Erdöl- und Erdgasindustrie - Unterwasser -
isolation thermique de canalisations et équipements sous
Wärmedämmungsschicht für Rohrleitungen, Vorlauf,
marins (ISO/DIS 12736:2011) Zubehör und Unterwasserkonstruktionen (ISO/DIS
12736:2011)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 12.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 12736:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12736:2012
prEN ISO 12736:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 12736:2012
prEN ISO 12736:2011 (E)
Foreword
This document (prEN ISO 12736:2011) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DIS 12736:2011 has been approved by CEN as a prEN ISO 12736:2011 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 12736:2012

---------------------- Page: 6 ----------------------
oSIST prEN ISO 12736:2012

DRAFT INTERNATIONAL STANDARD ISO/DIS 12736
ISO/TC 67/SC 2 Secretariat: UNI
Voting begins on Voting terminates on

2011-11-17 2012-04-17
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.