iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 379 S1:1998

(Main)

Area exposure product meter

Area exposure product meter

Deals with the performance and testing of area exposure meters intended to measure area exposure product to the patient during radiological medical examinations.

Bereichsexponierungsproduktmesser

Radiamètre de produit exposition-surface

S'applique aux performances et aux essais des radiamètres de produit exposition-surface destinés à mesurer le produit exposition-surface reçu par le patient, lors des examens radiologiques médicaux.

Area exposure product meter (IEC 60580:1977)

General Information

Status
Withdrawn
Publication Date
30-Sep-1998
Withdrawal Date
31-Jan-2002
ICS
17.240 - Radiation measurements
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Feb-2002
Due Date
01-Feb-2002
Completion Date
01-Feb-2002
Ref Project
HD 379 S1:1979 - Area exposure product meter

Relations

Replaced By
SIST EN 60580:2002 - Medical electrical equipment - Dose area product meters (IEC 60580:2000)
Effective Date
06-May-2014

Buy Standard

HD 379 S1:1998HD 379 S1:1998
PreviousNext
Standardization document
HD 379 S1:1998
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 379 S1:1998
01-oktober-1998
Area exposure product meter (IEC 60580:1977)
Area exposure product meter
Bereichsexponierungsproduktmesser
Radiamètre de produit exposition-surface
Ta slovenski standard je istoveten z: HD 379 S1:1979
ICS:
17.240 Merjenje sevanja Radiation measurements
SIST HD 379 S1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 2 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 3 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 4 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 5 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 6 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 7 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 8 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 9 ----------------------

SIST HD 379 S1:1998

---------------------- Page: 10 ----------------------

SIST HD 379 S1:1998

--------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61676:2023(Main)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2023)
EN IEC 61676:2023

This document specifies the performance requirements of instruments as used in the NON -
INVASIVE MEASUREMENT of X- RAY TUBE VOLTAGE up to 150 kV and the relevant compliance tests.
This document also describes the method for CALIBRATION and gives guidance for estimating
the uncertainty in measurements performed under conditions different from those during
CALIBRATION .
Applications for such measurement are found in diagnostic RADIOLOGY including mammography,
COMPUTED TOMOGRAPHY (CT), dental radiology and RADIOSCOPY . This document is not
concerned with the safety aspect of such instruments. The requirements for electrical safety
applying to them are contained in IEC 61010-1.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60731:2012/A1:2022(Amendment)
Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (IEC 60731:2011/A1:2016)
EN 60731:2012/A1:2022

NEXT ACTION: PUBLICATION EXPECTED BY 2019-10-31
2019-07-04 IP: BT decision D163/C033 - remove link to MDD  
NEXT ACTION: TB Action by 21-22 May 2019 i.e. Next CLC TC 62 Plenary Meeting
2019-01-24: JO - In contact with CLC TC 62 secretary to know if an annex ZZ is expected or if a CIB will be launched to decouple this standard from the harmonization process.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60580:2020(Main)
Medical electrical equipment - Dose area product meters (IEC 60580:2019)
EN IEC 60580:2020

EN-IEC 60580 specifies the performance and testing of DOSE AREA PRODUCT METERS intended to measure DOSE AREA PRODUCT and/or DOSE AREA PRODUCT RATE to which the PATIENT is exposed during MEDICAL RADIOLOGICAL EXAMINATIONS. This document is applicable to the following types of DOSE AREA PRODUCT METERS: a) FIELD-CLASS DOSE AREA PRODUCT METERS normally used for the measurement of DOSE AREA PRODUCTS during MEDICAL RADIOLOGICAL EXAMINATIONS; b) REFERENCE-CLASS DOSE AREA PRODUCT METERS normally used for the CALIBRATION of FIELDCLASS DOSIMETERS. The object of this document is 1) to establish requirements for a satisfactory level of performance for DOSE AREA PRODUCT METERS, and 2) to standardize the methods for the determination of compliance with this level of performance. Two levels of performance are specified: - a lower level of performance applying to FIELD-CLASS DOSE AREA PRODUCT METERS; - a higher level of performance applying to REFERENCE-CLASS DOSE AREA PRODUCT METERS.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61674:2013(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
EN 61674:2013

This International Standard specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS intended for the measurement of AIR KERMA, AIR KERMA LENGTH PRODUCT or AIR KERMA RATE, in photon radiation fields used in RADIOGRAPHY, including mammography, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-radiation with generating potentials not greater than 150 kV. This International Standard is applicable to the performance of DOSIMETERS with VENTED IONIZATION CHAMBERS and/or SEMICONDUCTOR DETECTORS as used in X-ray diagnostic imaging.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60731:2012
Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy
EN 60731:2012

This International Standard specifies the performance requirements of RADIOTHERAPY
DOSIMETERS, intended for the measurement of ABSORBED DOSE TO WATER or AIR KERMA (and
their rates and spatial distributions) in PHOTON, ELECTRON, proton or heavy ion RADIATION
FIELDS as used in RADIOTHERAPY.
The DOSE MONITORING SYSTEMS incorporated in RADIOTHERAPY treatment machines are not
covered by this standard, neither are the re-entrant IONIZATION CHAMBERS used for
BRACHYTHERAPY source calibration and constancy check devices.
This standard is applicable to the following types of dosimeter:
a) FIELD-CLASS DOSIMETERS normally used for
1) the measurement of KERMA or dose in a RADIATION BEAM, either in air or in a PHANTOM;
2) in vivo skin surface or intracavitary measurements of dose on PATIENTS.
b) REFERENCE-CLASS DOSIMETERS normally used for the calibration of FIELD-CLASS
DOSIMETERS;
NOTE REFERENCE-CLASS DOSIMETERS may be used as FIELD-CLASS DOSIMETERS.
c) SCANNING-CLASS DOSIMETERS normally used for relative dose distribution measurements
with a SCANNING SYSTEM such as an automatic water PHANTOM.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61676:2003/A1:2009(Amendment)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002/A1:2008)
EN 61676:2002/A1:2009
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61676:2003(Main)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
EN 61676:2002

Specifies the performance requirements of instruments as used in the non-invasive measurement of X-ray tube voltage up to 150 kV and the relevant compliance tests. Describes the method for calibration and gives guidance for estimating the uncertainty in measurements performed under conditions different from those during calibration. This standard is not concerned with the safety aspect of such instruments. The requirements for electrical safety applying to them are contained in EN 60601-1.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 61674:2023(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
prEN IEC 61674:2023
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21909-1:2023(Main)
Passive neutron dosimetry systems - Part 1: Performance and test requirements for personal dosimetry (ISO 21909-1:2021)
EN ISO 21909-1:2023

This document provides performance and test requirements for determining the acceptability of
neutron dosimetry systems to be used for the measurement of personal dose equivalent, Hp(10), for
neutrons ranging in energy from thermal to 20 MeV1).
This document applies to all passive neutron detectors that can be used within a personal dosemeter
in part or in all of the above-mentioned neutron energy range. No distinction between the different
techniques available in the marketplace is made in the description of the tests. Only generic distinctions,
for instance, as disposable or reusable dosemeters, are considered.
This document describes type tests only. Type tests are made to assess the basic characteristics of the
dosimetry systems and are often ensured by recognized national laboratories
This document does not present performance tests for characterizing the degradation induced by the
following:
— intrinsic temporal variability of the quality of the dosemeter supplied by the manufacturer;
— intrinsic temporal variability of preparation treatments (before irradiation and/or before reading),
if existing;
— intrinsic temporal variability of reading process;
— degradation due to environmental effects on the preparation treatments, if existing;
— degradation due to environmental effects on the reading process.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21909-2:2023(Main)
Passive neutron dosimetry systems - Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021)
EN ISO 21909-2:2023

This document provides methodology and criteria to qualify the dosimetry system at workplaces where
it is used. The criteria in this document apply to dosimetry systems which do not meet the criteria with
regard to energy and direction dependent responses described in ISO 21909-1.
The qualification of the dosimetry system at workplace aims to demonstrate that:
— either, the non-conformity of the dosimetry system to some of the requirements on the energy or
direction dependent responses defined in ISO 21909-1 does not lead to significant discrepancies in
the dose determination for a certain workplace field;
— or, that the correction factor or function used for this specific studied workplace enables the
dosimetry system to accurately determine the conventional dose value with uncertainties similar
to the ones given in ISO 21909-1.
The methodologies to characterize the work place field in order to perform the qualification of the
dosimetry system are given in Annex A. Annex B is complementary as it gives the practical methods to
follow, once one methodology is chosen.
The provider of the dosimetry system shall provide the type test results corresponding to ISO 21909-1.
However, when the dosimetry system to be qualified does not comply with all the criteria of ISO 21909-1
dealing with the energy and angle dependence of the response, some tests of the ISO 21909-1 can be not
performed.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day