SIST EN 301 908-14 V6.2.1:2014

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-14 Version 6.2.1SIST EN 301 908-14 V6.2.1:2014en01-februar-2014SIST EN 301 908-14 V6.2.1:2014SLOVENSKI
STANDARD



SIST EN 301 908-14 V6.2.1:2014



ETSI EN 301 908-14 V6.2.1 (2013-10) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive;
Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)
Harmonized European Standard SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)2
Reference REN/MSG-TFES-010-14 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, LTE, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 8 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 11 3.3 Abbreviations . 12 4 Technical requirements specifications . 13 4.1 Environmental profile . 13 4.2 Conformance requirements . 13 4.2.1 Introduction. 14 4.2.2 Operating band unwanted emissions . 15 4.2.2.1 Definition . 15 4.2.2.2 Limits . 16 4.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 33 and 34) . 16 4.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 17 4.2.2.2.3 Limits for Wide Area BS (Band 20) . 19 4.2.2.2.4 Limits for Local Area BS . 20 4.2.2.2.5 Limits for Home BS . 21 4.2.2.2.6 Limits for protection of DTT . 23 4.2.2.2.7 Limits for protection of adjacent band services . 24 4.2.2.3 Conformance . 24 4.2.3 Adjacent Channel Leakage power Ratio (ACLR) . 24 4.2.3.1 Definition . 24 4.2.3.2 Limits . 24 4.2.3.3 Conformance . 25 4.2.4 Transmitter spurious emissions . 25 4.2.4.1 Definition . 26 4.2.4.2 Limits . 26 4.2.4.2.1 Spurious emissions . 26 4.2.4.2.2 Co-existence with other systems . 26 4.2.4.2.3 Protection of the BS receiver of own or different BS . 28 4.2.4.2.4 Co-existence with Home BS operating in other bands . 28 4.2.4.3 Conformance . 29 4.2.5 Base Station maximum output power . 29 4.2.5.1 Definition . 30 4.2.5.2 Limit . 30 4.2.5.3 Conformance . 30 4.2.6 Transmitter intermodulation . 30 4.2.6.1 Definition . 30 4.2.6.2 Limit . 30 4.2.6.3 Conformance . 31 4.2.7 Receiver spurious emissions . 31 4.2.7.1 Definition . 31 4.2.7.2 Limit . 31 4.2.7.3 Conformance . 32 4.2.8 Blocking characteristics . 32 4.2.8.1 Definition . 32 4.2.8.2 Limit . 33 SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)4 4.2.8.3 Conformance . 34 4.2.9 Receiver intermodulation characteristics . 34 4.2.9.1 Definition . 34 4.2.9.2 Limit . 35 4.2.9.3 Conformance . 37 4.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 37 4.2.10.1 Definition . 37 4.2.10.2 Limit . 37 4.2.10.3 Conformance . 40 4.2.11 Home BS output power for adjacent UTRA channel protection. 40 4.2.11.1 Definition . 40 4.2.11.2 Limit . 40 4.2.11.3 Conformance . 41 4.2.12 Home BS output power for adjacent E-UTRA channel protection . 41 4.2.12.1 Definition and applicability . 41 4.2.12.2 Limit . 41 4.2.12.3 Conformance . 42 4.2.13 Home BS output power for co-channel E-UTRA protection . 42 4.2.13.1 Definition and applicability . 42 4.2.13.2 Limit . 42 4.2.13.3 Conformance . 43 5 Testing for compliance with technical requirements . 44 5.1 Environmental conditions for testing . 44 5.2 Interpretation of the measurement results . 44 5.3 Essential radio test suites . 45 5.3.1 Operating band unwanted emissions . 45 5.3.1.1 Initial conditions . 45 5.3.1.2 Procedure . 46 5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 46 5.3.2.1 Initial conditions . 46 5.3.2.2 Procedure . 46 5.3.3 Transmitter spurious emissions . 46 5.3.3.1 Initial conditions . 47 5.3.3.2 Procedure . 47 5.3.4 Base Station maximum output power . 47 5.3.4.1 Initial conditions . 47 5.3.4.2 Procedure . 47 5.3.5 Transmitter intermodulation . 47 5.3.5.1 Initial conditions . 48 5.3.5.2 Procedures . 48 5.3.6 Receiver spurious emissions . 48 5.3.6.1 Initial conditions . 48 5.3.6.2 Procedure . 49 5.3.7 Blocking characteristics . 49 5.3.7.1 Initial conditions . 49 5.3.7.2 Procedure . 49 5.3.8 Receiver intermodulation characteristics . 50 5.3.8.1 Initial conditions . 50 5.3.8.2 Procedures . 50 5.3.9 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 50 5.3.9.1 Initial conditions . 50 5.3.9.2 Procedure for Adjacent Channel Selectivity . 51 5.3.9.3 Procedure for narrow-band blocking . 51 5.3.10 Home BS output power for adjacent channel protection . 51 5.3.10.1 Initial conditions . 51 5.3.10.2 Procedure . 51 5.3.11 Home BS output power for adjacent E-UTRA channel protection . 52 5.3.11.1 Initial conditions . 52 5.3.11.2 Procedure . 52 5.3.12 Home BS output power for co-channel E-UTRA protection . 53 5.3.12.1 Initial conditions . 53 SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)5 5.3.12.2 Procedure . 53 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 55 Annex B (normative): Base Station configurations . 57 B.1 Reception with multiple receiver antenna connectors, receiver diversity . 57 B.2 Duplexers . 57 B.3 Power supply options . 57 B.4 Ancillary RF amplifiers . 58 B.5 BS using antenna arrays . 58 B.5.1 Receiver tests . 59 B.5.2 Transmitter tests . 59 B.6 Transmission with multiple transmitter antenna connectors . 59 B.7 BS with integrated Iuant BS modem . 60 Annex C (informative): Environmental profile specification . 61 Annex D: Void . 62 Annex E (informative): Bibliography . 63 History . 64
SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandates M/284 and M/406 issued from the European Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.6]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A. The present document is part 14 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 7 October 2013 Date of latest announcement of this EN (doa): 31 January 2014 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 July 2014 Date of withdrawal of any conflicting National Standard (dow): 31 July 2015
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)7 1 Scope The present document applies to the following radio equipment types: 1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA). This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Table 1-1: E-UTRA Base Station operating bands E-UTRA band Direction of transmission E-UTRA Base Station operating bands 1 Transmit
2 110 MHz to 2 170 MHz Receive
1 920 MHz to 1 980 MHz 3 Transmit
1 805 MHz to 1 880 MHz Receive
1 710 MHz to 1 785 MHz 7 Transmit
2 620 MHz to 2 690 MHz Receive
2 500 MHz to 2 570 MHz 8 Transmit
925 MHz to 960 MHz Receive
880 MHz to 915 MHz 20 Transmit
791 MHz to 821 MHz Receive
832 MHz to 862 MHz 22 Transmit
3 510 MHz to 3 590 MHz Receive
3 410 MHz to 3 490 MHz 33 Transmit and Receive 1 900 MHz to 1 920 MHz 34 Transmit and Receive 2 010 MHz to 2 025 MHz 38 Transmit and Receive 2 570 MHz to 2 620 MHz 40 Transmit and Receive 2 300 MHz to 2 400 MHz 42 Transmit and Receive 3 400 MHz to 3 600 MHz 43 Transmit and Receive 3 600 MHz to 3 800 MHz
The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9 and 10. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2, which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. SIST EN 301 908-14 V6.2.1:2014



ETSI ETSI EN 301 908-14 V6.2.1 (2013-10)8 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] ETSI EN 301 908-1 (V6.2.1) (04-2013): "IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements". [2] ETSI TS 136 141 (V10.10.0) (04-2013): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 10.10.0 Release 10)". [3] Void. [4] Recommendation ITU-R SM.329-12 (09-2012): "Unwanted emissions in the spurious domain". [5] ETSI TS 125 104 (V10.8.0) (02-2013): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 10.8.0 Release 10)". [6] ETSI TS 125 105 (V10.5.0) (10-2012): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 10.5.0 Release 10)". [7] ETSI TS 136 104 (V10.10.0) (04-2013): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 10.10.0 Release 10)". [8] ETSI TS 125 141 (V10.8.0) (02-2013): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 10.8.0 Release 10)". [9] ETSI EN 301 908-18 (V6.2.1) (11-2012): "IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 18: E-UTRA, UTRA and GSM/EDGE
...