SIST EN 4183:2004
(Main)Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded ends
Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded ends
This standard specifies the characteristics of elbows 90 , welded ends, for pipe couplings 8 30', in titanium alloy, for
aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range: 55 C to 135 C
Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkelverschraubungen 90° mit Anschweißenden
Diese Norm legt die Eigenschaften von Winkelverschraubungen 90° mit Anschweißenden, für Rohrverschraubungen 8°30',
aus Titanlegierung, zur Verwendung in der Luft- und Raumfahrt fest.
Nenndruck: bis 28 000 kPa
Temperaturbereich: 55 °C bis 135 °C
Série aérospatiale - Systeme de raccordement 8°30' en alliage de titane - Raccords coudés a 90° doubles, a souder
La présente norme spécifie les caractéristiques des raccords coudés a 90° a souder, doubles, pour les systemes de
raccordement 8°30', en alliage de titane, pour applications aérospatiales.
Pression nominale: jusqu'a 28 000 kPa
Plage de température: 55 °C a 135 °C
Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded ends
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded endsLuft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkelverschraubungen 90° mit AnschweißendenSérie aérospatiale - Systeme de raccordement 8°30' en alliage de titane - Raccords coudés a 90° doubles, a souderAerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded ends49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4183:2001SIST EN 4183:2004en01-maj-2004SIST EN 4183:2004SLOVENSKI
STANDARD
SIST EN 4183:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4183October 2001ICS 49.080English versionAerospace series - Pipe coupling 8°30' in titanium alloy - Elbows90° welded endsSérie aérospatiale - Système de raccordement 8°30' enalliage de titane - Raccords coudés à 90° doubles, àsouderLuft- und Raumfahrt - Rohrverschraubung 8°30' ausTitanlegierung - Winkelverschraubungen 90° mitAnschweißendenThis European Standard was approved by CEN on 28 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4183:2001 ESIST EN 4183:2004
EN 4183:2001 (E)ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received theapproval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentationto CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or byendorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries arebound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany,Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom.2SIST EN 418
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.