SIST EN 60794-1-2:2017
(Main)Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)
Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)
IEC 60794-1-2: 2017 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The prime objective of this document is to provide the end user with an overview about the content of different parts of the IEC 60794-1 series numbered -2X. Table 1 shows the different parts.
Table 1 – Document overview
Test methods | IEC reference |
General guidance | IEC 60794-1-2 |
Methods E – Mechanical | IEC 60794-1-21 |
Methods F – Environmental | IEC 60794-1-22 |
Methods G – Cable elements | IEC 60794-1-23 |
Methods H – Electrical | IEC 60794-1-24 |
NOTE Several numbers in the test method numbering sequence are missing. The reasons for these omissions are historical. To avoid confusion, the existing numbering sequence has been retained. | |
These documents define test procedures to be used in establishing uniform requirements for the geometrical, transmission, material, mechanical, ageing (environmental exposure) and climatic properties of optical fibre cables, and electrical requirements where appropriate. Throughout the documents, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. The secondary objective of this document is to provide the end user with useful guidance when testing optical fibre cables. This fourth edition cancels and replaces the third edition published in 2013 and IEC 60794-1-20 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition and to IEC 60794-1-20:
- the multiple cross-reference tables have been deleted and replaced with a higher level one related to the generic standards;
- all pertinent text from IEC 60794-1-20 has been included;
- standard optical test wavelengths have been introduced;
- this document has been streamlined by cross-referencing IEC 60794-1-1;
- the &q
Lichtwellenleiterkabel - Teil 1-2: Fachgrundspezifikation - Kreuzverweistabelle für Prüfverfahren für Lichtwellenleiterkabel (IEC 60794-1-2:2017)
Câbles à fibres optiques - Partie 1-2: Spécification générique - Table des références croisées relative aux procédures d'essais des câbles optiques (IEC 60794-1-2:2017)
IEC 60794-1-2: 2017 s’applique aux câbles à fibres optiques destinés à être utilisés avec les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués d'une combinaison de fibres optiques et de conducteurs électriques. L'objectif principal du présent document est de fournir à l'utilisateur final une vue d'ensemble sur le contenu des différentes parties de la série IEC 60794-1 portant le numéro -2X. Le Tableau 1 présente les différentes parties.
Tableau 1– Vue d'ensemble des documents
Méthodes d'essai | Référence IEC |
Lignes directrices générales | IEC 60794-1-2 |
Méthodes E – Essais mécaniques | IEC 60794-1-21 |
Méthodes F – Essais environnementaux | IEC 60794-1-22 |
Méthodes G – Eléments du câble | IEC 60794-1-23 |
Méthodes H – Essais électriques | IEC 60794-1-24 |
NOTE Plusieurs numéros de la séquence de numérotation de la méthode d'essai sont manquants. Les raisons de ces omissions sont historiques. Afin d'éviter toute confusion, la séquence de numérotation existante a été retenue. | |
Ces documents définissent les procédures d’essai à utiliser pour établir des exigences uniformes relatives aux caractéristiques géométriques, de transmission, de matériaux, mécaniques, de vieillissement (exposition à l'environnement) et climatiques des câbles à fibres optiques, ainsi que des exigences électriques, le cas échéant. Tout au long des documents, l'expression "câble optique" peut également inclure des unités de fibres optiques, des unités de fibres en microconduits, etc. Le deuxième objectif de ce document est de fournir à l'utilisateur final des lignes directrices utiles lors de l'essai de câbles à fibres optiques. Cette quatrième édition annule et remplace la troisième édition publiée en 2013 et l'IEC 60794-1-20 publiée en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente et à l
Optični kabli - 1-2. del: Rodovna specifikacija - Osnovni preskusni postopki za optične kable - Splošno navodilo (IEC 60794-1-2:2017)
Ta del standarda IEC 60794-1 obravnava optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov.
Glavni cilj tega dokumenta je, da se končnemu uporabniku zagotovi pregled vsebine različnih delov skupine standardov IEC 60794-1, oštevilčenih z -2X.
Ti dokumenti opredeljujejo preskusne postopke, ki se uporabljajo za določanje enotnih zahtev za geometrijske, prenosne, materialne, mehanske, starostne (okoljska izpostavljenost) in klimatske lastnosti optičnih kablov, in električnih zahtev, kjer je to ustrezno.
V teh dokumentih lahko besedna zveza »optični kabel« zajema tudi optične enote, mikrokanale itd.
Dodaten namen tega dokumenta je končnemu uporabniku zagotoviti uporabne smernice za preskušanje optičnih kablov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiterkabel - Teil 1-2: Fachgrundspezifikation - Kreuzverweistabelle für Prüfverfahren für Lichtwellenleiterkabel (IEC 60794-1-2:2017)Câbles à fibres optiques - Partie 1-2: Spécification générique - Table des références croisées relative aux procédures d'essais des câbles optiques (IEC 60794-1-2:2017)Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60794-1-2:2017SIST EN 60794-1-2:2017en01-maj-2017SIST EN 60794-1-2:2017SLOVENSKI
STANDARDSIST EN 60794-1-2:20141DGRPHãþD
SIST EN 60794-1-2:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60794-1-2
March 2017 ICS 33.180.10
Supersedes
EN 60794-1-2:2014
English Version
Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)
Câbles à fibres optiques - Partie 1-2: Spécification générique - Procédures fondamentales d'essais des câbles optiques - Lignes directrices générales (IEC 60794-1-2:2017)
Lichtwellenleiterkabel - Teil 1-2: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Allgemeine Anleitung (IEC 60794-1-2:2017) This European Standard was approved by CENELEC on 2017-02-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60794-1-2:2017 E SIST EN 60794-1-2:2017
EN 60794-1-2:2017 2 European foreword The text of document 86A/1767/FDIS, future edition 4 of IEC 60794-1-2, prepared by SC 86A "Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-1-2:2017. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-11-16 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-02-16
This document supersedes EN 60794-1-2:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60794-1-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated IEC 60794-1-21 NOTE Harmonized as EN 60794-1-21. IEC 60794-1-22 NOTE Harmonized as EN 60794-1-22. IEC 60794-1-23 NOTE Harmonized as EN 60794-1-23. IEC 60794-1-24 NOTE Harmonized as EN 60794-1-24.
SIST EN 60794-1-2:2017
EN 60794-1-2:2017 3
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60793-1-40 -
Optical f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.