Satellite Earth Stations and Systems (SES) - Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to- earth) frequency bands - Part 3: User Equipment (UE) for narrowband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

This Harmonized Standard for two-way communications in the S-bands specifies the essential requirements due to the R&TTE (article 3.2) Directive for Satellite Earth Station Terminals operating in the frequency band allocated to the Mobile Satellite Service (MSS) on a primary basis, 2170 to 2200 MHz (space-to-earth) and 1980 to 2010 MHz (earth-to-space). This new Part 3 defines the requirements for narrowband terminals (CBw < 1 MHz).

Satelitske zemeljske postaje in sistemi (SES) - Harmonizirani standard za satelitske zemeljske postaje za MSS, ki delujejo v frekvenčnih pasovih od 1980 MHz do 2010 MHz (zemlja-vesolje) in 2170 MHz do 2200 MHz (vesolje-zemlja) - 3. del: Uporabniška oprema za ozkopasovne sisteme: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

Pričujoči dokument velja za uporabniško opremo (UE), ki je tip radijske opreme, katera ima naslednje značilnosti:
- te UE imajo tako zmožnost oddajanja kot prejemanja in delujejo v geostacionarnem satelitskem omrežju;
- te UP delujejo z dodeljeno pasovno širino signalnega kanala (CB), ki znaša manj kot 1 MHz;
- te UE so lahko slušalka, lahko so ročne, prenosne, nameščene na vozilo, ali priključene na gostitelja, lahko je to delno fiksna ali fiksna oprema ali pa element v terminalu, ki ima več načinov. Lahko so sestavljene iz več modulov s pripadajočimi povezavami in uporabniškim vmesnikom, ali pa kot ena samostojna enota;
- če je UE element v terminalu, ki ima več načinov, in če ni drugače navedeno v pričujočem dokumentu, potem njegove zahteve veljajo samo za UE element terminala, ki deluje v frekvenčnih pasovih mobilnih satelitskih storitev (MSS), podanih v preglednici 1. Ta tip radijske opreme je zmožen delovanja v vseh ali delu frekvenčnih pasov, prikazanih v preglednici 1.

General Information

Status
Published
Public Enquiry End Date
04-Feb-2010
Publication Date
14-Oct-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Sep-2010
Due Date
19-Nov-2010
Completion Date
15-Oct-2010
Mandate

Buy Standard

Standard
EN 302 574-3 V1.1.1:2010
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 302 574-3 V1.1.1 (2010-06) - Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to- earth) frequency bands; Part 3: User Equipment (UE) for narrowband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
English language
39 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 302 574-3 V1.1.0 (2009-11) - Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to- earth) frequency bands; Part 3: User Equipment (UE) for narrowband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
English language
40 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Satellite Earth Stations and Systems (SES) - Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to- earth) frequency bands - Part 3: User Equipment (UE) for narrowband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:EN 302 574-3 Version 1.1.1SIST EN 302 574-3 V1.1.1:2010en01-november-2010SIST EN 302 574-3 V1.1.1:2010SLOVENSKI
STANDARD



SIST EN 302 574-3 V1.1.1:2010



ETSI EN 302 574-3 V1.1.1 (2010-08)Harmonized European Standard (Telecommunications series) Satellite Earth Stations and Systems (SES);Harmonized Standard for satellite earth stations forMSS operating in the 1 980 MHz to2 010 MHz (earth-to-space) and 2 170 MHz to2 200 MHz (space-to-earth) frequency bands;Part 3: User Equipment (UE) for narrowband systems:Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 2
Reference DEN/SES-00283-3 Keywords MES, mobile, MSS, narrowband, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 3 Contents Intellectual Property Rights . 5 Foreword . 5 Introduction . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 7 3.1 Definitions . 7 3.2 Symbols . 9 3.3 Abbreviations . 9 4 Technical requirements specifications . 10 4.1 Environmental profile . 10 4.2 Conformance requirements . 10 4.2.1 Introduction. 10 4.2.2 Unwanted emissions outside the band 1 980 MHz to 2 010 MHz (carrier-on state) . 10 4.2.2.1 Justification . 10 4.2.2.2 Technical requirements . 10 4.2.2.3 Conformance test . 12 4.2.3 Unwanted emissions within the band 1 980 MHz to 2 010 MHz (carrier-on state) . 12 4.2.3.1 Justification . 12 4.2.3.2 Technical requirements . 12 4.2.3.3 Conformance test . 14 4.2.4 Unwanted emissions in carrier-off state . 15 4.2.4.1 Justification . 15 4.2.4.2 Technical requirements . 15 4.2.4.3 Conformance test . 15 4.2.5 UE Control and Monitoring Functions (CMF) . 15 4.2.5.1 Absence of a valid network handling of output power . 15 4.2.5.1.1 Definition. 15 4.2.5.1.2 Limit . 15 4.2.5.1.3 Conformance . 16 4.2.5.2 Loss of signal handling of output power . 16 4.2.5.2.1 Definition. 16 4.2.5.2.2 Limit . 16 4.2.5.2.3 Conformance . 16 5 Testing for compliance with technical requirements . 16 5.1 Environmental conditions for testing . 16 5.2 Interpretation of the measurement results . 16 5.3 Essential radio test suites . 17 5.3.1 General . 17 5.3.1.1 Description of equipment . 17 5.3.1.2 Testing of host-connected equipment and plug-in modules . 18 5.3.1.2.1 Alternative approaches . 18 5.3.1.2.2 Alternative A: combined equipment . 18 5.3.1.2.3 Alternative B: use of a test jig . 18 5.3.1.3 CMF/Special Test Equipment (STE) . 18 5.3.1.4 General test requirements . 19 5.3.1.4.1 UE test modes . 19 5.3.1.4.2 Special Test Equipment (STE) . 19 5.3.1.4.3 Laboratory Test Equipment (LTE) . 20 5.3.1.4.4 Methods of test for UE RF emissions according to the equipment type . 20 5.3.1.4.5 Procedures for measurement of radiated emissions . 21 SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 4 5.3.1.4.6 Procedures for measurement of conducted emissions . 25 5.3.2 Unwanted emissions outside the band 1 980 MHz to 2 010 MHz (carrier-on state) . 27 5.3.2.1 Method of test . 27 5.3.2.2 Peak measurement . 28 5.3.2.3 Average measurement . 28 5.3.2.4 Test requirements . 28 5.3.3 Unwanted emissions within the band 1 980 MHz to 2 010 MHz (carrier-on state) . 29 5.3.3.1 Method of test . 29 5.3.3.2 Measurement method . 29 5.3.3.3 Test requirements . 30 5.3.4 Unwanted emissions in carrier-off state . 30 5.3.4.1 Method of test . 30 5.3.4.2 Measurement method . 30 5.3.4.3 Test requirements . 30 5.3.5 UE Control and Monitoring Functions (CMF) . 31 5.3.5.1 Method of test . 31 5.3.5.2 Testing of output power in absence of a valid network . 31 5.3.5.2.1 Test procedure . 31 5.3.5.2.2 Measurement method . 31 5.3.5.3 Testing of output power in loss of signal . 31 5.3.5.3.1 Test procedure . 31 5.3.5.3.2 Measurement method . 32 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 33 Annex B (informative): The EN title in the official languages . 35 Annex C (informative): Environmental profile specification . 36 C.1 Introduction . 36 C.2 Temperature . 36 C.3 Voltage . 36 C.4 Test environment . 37 Annex D (informative): Bibliography . 38 History . 39
SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The requirements relevant to Directive 1999/5/EC [1] are summarised in annex A. The present document is part 3 of a multi-part deliverable covering the Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands, as identified below: Part 1: "Complementary Ground Component (CGC) for wideband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 2: "User Equipment (UE) for wideband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "User Equipment (UE) for narrowband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 2 August 2010 Date of latest announcement of this EN (doa): 30 November 2010 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 May 2011 Date of withdrawal of any conflicting National Standard (dow): 31 May 2012
SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 6 Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [1]. The modular structure is shown in EG 201 399 [i.5]. 1 Scope The present document applies to User Equipment (UE) radio equipment type which have the following characteristics: • these UEs have both transmit and receive capabilities and operate in a Geostationary satellite network; • these UEs operate with an assigned channel signal bandwidth (CBw) smaller than 1 MHz; • these UEs may be handset, handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed equipment, or may be an element in a multi-mode terminal. It may consist of a number of modules with associated connections and user interface, or may be a self contained single unit; • if the UE is an element in a multi-mode terminal, unless otherwise stated in the present document, its requirements apply only to the UE element of the terminal operating in the Mobile Satellite Service (MSS) frequency bands given in table 1. This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1. Table 1: Mobile Satellite Service UE frequency bands Operating band Direction of transmission UE frequency bands I UE Transmit (earth-to-space) 1 980 MHz to 2 010 MHz UE Receive (space-to-earth) 2 170 MHz to 2 200 MHz
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial space radio communications and orbital resources so as to avoid harmful interference". NOTE 1: In addition to the unwanted emission limits defined in clause 4.2.2 of the present document, additional operational constraints may be required to prevent harmful interference into services operating in the neighbouring bands outside the operational band defined in table 1. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document. NOTE 2: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 7 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [2] ITU-T Recommendation O.153 (10/1992): "Basic parameters for the measurement of error performance at bit rates below the primary rate". [3] CISPR 16-1-4 (2010): "Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements". [4] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [5] IEC 60068-2-1 (2007): "Environmental testing - Part 2-1: Tests - Test A: Cold". [6] IEC 60068-2-2 (2007): "Environmental testing - Part 2-2: Tests - Test B: Dry heat". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] ETSI TR 102 215: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended approach, and possible limits for measurement uncertainty for the measurement of radiated electromagnetic fields above 1 GHz". [i.2] ETSI EN 302 574-1: "Satellite Earth Stations and Systems (SES); Harmonized standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1: Complementary Ground Component (CGC) for wideband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.3] ETSI EN 302 574-2: "Satellite Earth Stations and Systems (SES); Harmonized standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 2: User Equipment (UE) for wideband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive". [i.4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.5] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive". 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following apply: applicant: manufacturer or his authorized representative within the European Community or the person responsible for placing the apparatus on the market carrier-on time (initial bursts): period when a UE is transmitting a signal SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 8 NOTE: For UEs that transmit in a non-continuous mode, the carrier-on time only includes the times when the UE is transmitting a signal. carrier-on state: UE is in this state when it is authorized by the NCF to transmit and when it transmits a signal carrier-off state: UE is in this state when either it is authorized by the Network Control Facility (NCF) to transmit but when it does not transmit any signal, or when it is not authorized by the NCF to transmit conducted measurement: measurement of emissions from an antenna port of the UE made by direct wired connection to the port environmental profile: range of environmental conditions under which equipment within the scope of the present document is required to comply with the provisions of the present document Equivalent Isotropically Radiated Power (EIRP): product of transmitter power and the antenna gain in the direction considered, relative to an isotropic source radiating uniformly in all directions fellow radio station: one of the (other) modes of a multimode UE handheld: indicates a UE which is self-contained and is small enough and light enough to be carried and used during a call with one hand host-connected: indicates a UE for which connection to or integration with host equipment is necessary to offer functionality host equipment: any equipment which has a complete user functionality when not connected to the UE, and to which the UE provides additional functionality, and to which connection is necessary for the UE to offer functionality Installable Equipment (IE): equipment which is intended to be installed in a vehicle NOTE: An IE may consist of one or several interconnected modules. The IE is composed of modules intended to be externally mounted as declared by the applicant, and defined as Externally Mounted Equipment (EME) and the remaining modules(s) as Internally Mounted Equipment (IME). Laboratory Test Equipment (LTE): logical grouping that contains the standard test equipment provided by a test laboratory MSS band: continuous range of frequencies allocated by the ITU to the MSS multimode: indicates equipment that accommodates radio stations of different radio networks network control channel: channel by which a UE receives general control information from the NCF NCF control message: message, normally originating from a network, to a specified terminal or set of terminals of the network which indicates to the terminal or set of terminals that it/they should carry out some specific action or should enter or maintain some specific state NOTE: For test purposes NCF control messages may originate from Special Test Equipment (STE). nominated bandwidth (Bn): The nominated bandwidth of the UE radio frequency transmission is nominated by the applicant. NOTE: The nominated bandwidth is wide enough to encompass all spectral elements of the transmission necessary for communication and which have a level greater than the specified unwanted emissions limits. The nominated bandwidth is wide enough to take account of the transmit carrier frequency stability. The nominated bandwidth is centred on the transmit frequency and does not exceed 180 % of the 3dB bandwidth of the signal. The nominated bandwidth is within the assigned part of the MSS transmit frequency band within which the UE operates. 3 dB Bandwidth (B3dB): total width of the signal spectrum 3 dB below the maximum in-band density operational frequency range(s): sub-portion(s) of the band in the earth-to-space direction to the MSS network, for which the equipment has been designed as declared by the applicant Portable Equipment (PE): equipment generally intended to be self-contained, free standing and portable NOTE: A PE would normally consist of a single module, but may consist of several interconnected modules. SIST EN 302 574-3 V1.1.1:2010



ETSI ETSI EN 302 574-3 V1.1.1 (2010-08) 9 radiated measurement: measurement of an actual radiated field Special Test Equipment (STE): equipment which allows a test laboratory to control the UE so that the tests required by the present document can be performed spurious emissions: emissions at frequencies beyond the limit of 2,5 MHz above and below the centre frequency of the wanted emission NOTE: Spurious emissions are generally considered as emissions at frequencies beyond the limit of 250 % of the necessary bandwidth above and below the centre frequency of the wanted emission. For the purposes of the present specification, this limit is defined as frequencies which are 2,5 MHz or greater away from the UE centre carrier frequency, where 2,5
...

Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
Harmonized European Standard (Telecommunications series)

Satellite Earth Stations and Systems (SES);
Harmonized Standard for satellite earth stations for
MSS operating in the 1 980 MHz to
2 010 MHz (earth-to-space) and 2 170 MHz to
2 200 MHz (space-to-earth) frequency bands;
Part 3: User Equipment (UE) for narrowband systems:
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)



Reference
DEN/SES-00283-3
Keywords
MES, mobile, MSS, narrowband, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2010.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.1 Introduction. 10
4.2.2 Unwanted emissions outside the band 1 980 MHz to 2 010 MHz (carrier-on state) . 10
4.2.2.1 Justification . 10
4.2.2.2 Technical requirements . 10
4.2.2.3 Conformance test . 12
4.2.3 Unwanted emissions within the band 1 980 MHz to 2 010 MHz (carrier-on state) . 12
4.2.3.1 Justification . 12
4.2.3.2 Technical requirements . 12
4.2.3.3 Conformance test . 14
4.2.4 Unwanted emissions in carrier-off state . 15
4.2.4.1 Justification . 15
4.2.4.2 Technical requirements . 15
4.2.4.3 Conformance test . 15
4.2.5 UE Control and Monitoring Functions (CMF) . 15
4.2.5.1 Absence of a valid network handling of output power . 15
4.2.5.1.1 Definition. 15
4.2.5.1.2 Limit . 15
4.2.5.1.3 Conformance . 16
4.2.5.2 Loss of signal handling of output power . 16
4.2.5.2.1 Definition. 16
4.2.5.2.2 Limit . 16
4.2.5.2.3 Conformance . 16
5 Testing for compliance with technical requirements . 16
5.1 Environmental conditions for testing . 16
5.2 Interpretation of the measurement results . 16
5.3 Essential radio test suites . 17
5.3.1 General . 17
5.3.1.1 Description of equipment . 17
5.3.1.2 Testing of host-connected equipment and plug-in modules . 18
5.3.1.2.1 Alternative approaches . 18
5.3.1.2.2 Alternative A: combined equipment . 18
5.3.1.2.3 Alternative B: use of a test jig . 18
5.3.1.3 CMF/Special Test Equipment (STE) . 18
5.3.1.4 General test requirements . 19
5.3.1.4.1 UE test modes . 19
5.3.1.4.2 Special Test Equipment (STE) . 19
5.3.1.4.3 Laboratory Test Equipment (LTE) . 20
5.3.1.4.4 Methods of test for UE RF emissions according to the equipment type . 20
5.3.1.4.5 Procedures for measurement of radiated emissions . 21
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
5.3.1.4.6 Procedures for measurement of conducted emissions . 25
5.3.2 Unwanted emissions outside the band 1 980 MHz to 2 010 MHz (carrier-on state) . 27
5.3.2.1 Method of test . 27
5.3.2.2 Peak measurement . 28
5.3.2.3 Average measurement . 28
5.3.2.4 Test requirements . 28
5.3.3 Unwanted emissions within the band 1 980 MHz to 2 010 MHz (carrier-on state) . 29
5.3.3.1 Method of test . 29
5.3.3.2 Measurement method . 29
5.3.3.3 Test requirements . 30
5.3.4 Unwanted emissions in carrier-off state . 30
5.3.4.1 Method of test . 30
5.3.4.2 Measurement method . 30
5.3.4.3 Test requirements . 30
5.3.5 UE Control and Monitoring Functions (CMF) . 31
5.3.5.1 Method of test . 31
5.3.5.2 Testing of output power in absence of a valid network . 31
5.3.5.2.1 Test procedure . 31
5.3.5.2.2 Measurement method . 31
5.3.5.3 Testing of output power in loss of signal . 31
5.3.5.3.1 Test procedure . 31
5.3.5.3.2 Measurement method . 32
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 33
Annex B (informative): The EN title in the official languages . 35
Annex C (informative): Environmental profile specification . 36
C.1 Introduction . 36
C.2 Temperature . 36
C.3 Voltage . 36
C.4 Test environment . 37
Annex D (informative): Bibliography . 38
History . 39

ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Satellite Earth Stations and Systems (SES), and is now submitted for the Vote phase of the ETSI standards Two-step
Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The requirements relevant to Directive 1999/5/EC [1] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the Harmonized Standard for satellite earth stations
for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth)
frequency bands, as identified below:
Part 1: "Complementary Ground Component (CGC) for wideband systems: Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 2: "User Equipment (UE) for wideband systems: Harmonized EN covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 3: "User Equipment (UE) for narrowband systems: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [1]. The modular
structure is shown in EG 201 399 [i.5].
ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
1 Scope
The present document applies to User Equipment (UE) radio equipment type which have the following characteristics:
• these UEs have both transmit and receive capabilities and operate in a Geostationary satellite network;
• these UEs operate with an assigned channel signal bandwidth (CBw) smaller than 1 MHz;
• these UEs may be handset, handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed
equipment, or may be an element in a multi-mode terminal. It may consist of a number of modules with
associated connections and user interface, or may be a self contained single unit;
• if the UE is an element in a multi-mode terminal, unless otherwise stated in the present document, its
requirements apply only to the UE element of the terminal operating in the Mobile Satellite Service (MSS)
frequency bands given in table 1.
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1.
Table 1: Mobile Satellite Service UE frequency bands
Operating band Direction of transmission UE frequency bands
UE Transmit (earth-to-space) 1 980 MHz to 2 010 MHz
I
UE Receive (space-to-earth) 2 170 MHz to 2 200 MHz

The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial space radio communications and orbital resources so as to avoid harmful interference".
NOTE 1: In addition to the unwanted emission limits defined in clause 4.2.2 of the present document, additional
operational constraints may be required to prevent harmful interference into services operating in the
neighbouring bands outside the operational band defined in table 1.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE 2: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ITU-T Recommendation O.153 (10/1992): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
[3] CISPR 16-1-4 (2010): "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements".
[4] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[5] IEC 60068-2-1 (2007): "Environmental testing - Part 2-1: Tests - Test A: Cold".
[6] IEC 60068-2-2 (2007): "Environmental testing - Part 2-2: Tests - Test B: Dry heat".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 102 215: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Recommended approach, and possible limits for measurement uncertainty for the measurement of
radiated electromagnetic fields above 1 GHz".
[i.2] ETSI EN 302 574-1: "Satellite Earth Stations and Systems (SES); Harmonized standard for
satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and
2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1: Complementary Ground
Component (CGC) for wideband systems: Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive".
[i.3] ETSI EN 302 574-2: "Satellite Earth Stations and Systems (SES); Harmonized standard for
satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and
2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 2: User Equipment (UE) for
wideband systems: Harmonized EN covering essential requirements of article 3.2 of the R&TTE
Directive".
[i.4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.5] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of candidate Harmonized Standards for application under the R&TTE Directive".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
applicant: manufacturer or his authorized representative within the European Community or the person responsible for
placing the apparatus on the market
carrier-on time (initial bursts): period when a UE is transmitting a signal
NOTE: For UEs that transmit in a non-continuous mode, the carrier-on time only includes the times when the UE
is transmitting a signal.
carrier-on state: UE is in this state when it is authorized by the NCF to transmit and when it transmits a signal
carrier-off state: UE is in this state when either it is authorized by the Network Control Facility (NCF) to transmit but
when it does not transmit any signal, or when it is not authorized by the NCF to transmit
conducted measurement: measurement of emissions from an antenna port of the UE made by direct wired connection
to the port
ETSI

---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
Equivalent Isotropically Radiated Power (EIRP): product of transmitter power and the antenna gain in the direction
considered, relative to an isotropic source radiating uniformly in all directions
fellow radio station: one of the (other) modes of a multimode UE
handheld: indicates a UE which is self-contained and is small enough and light enough to be carried and used during a
call with one hand
host-connected: indicates a UE for which connection to or integration with host equipment is necessary to offer
functionality
host equipment: any equipment which has a complete user functionality when not connected to the UE, and to which
the UE provides additional functionality, and to which connection is necessary for the UE to offer functionality
Installable Equipment (IE): equipment which is intended to be installed in a vehicle
NOTE: An IE may consist of one or several interconnected modules. The IE is composed of modules intended to
be externally mounted as declared by the applicant, and defined as Externally Mounted Equipment (EME)
and the remaining modules(s) as Internally Mounted Equipment (IME).
Laboratory Test Equipment (LTE): logical grouping that contains the standard test equipment provided by a test
laboratory
MSS band: continuous range of frequencies allocated by the ITU to the MSS
multimode: indicates equipment that accommodates radio stations of different radio networks
network control channel: channel by which a UE receives general control information from the NCF
NCF control message: message, normally originating from a network, to a specified terminal or set of terminals of the
network which indicates to the terminal or set of terminals that it/they should carry out some specific action or should
enter or maintain some specific state
NOTE: For test purposes NCF control messages may originate from Special Test Equipment (STE).
nominated bandwidth (Bn): The nominated bandwidth of the UE radio frequency transmission is nominated by the
applicant.
NOTE: The nominated bandwidth is wide enough to encompass all spectral elements of the transmission
necessary for communication and which have a level greater than the specified unwanted emissions
limits. The nominated bandwidth is wide enough to take account of the transmit carrier frequency
stability. The nominated bandwidth is centred on the transmit frequency and does not exceed 180 % of
the 3dB bandwidth of the signal. The nominated bandwidth is within the assigned part of the MSS
transmit frequency band within which the UE operates.
3 dB Bandwidth (B3dB): total width of the signal spectrum 3 dB below the maximum in-band density
operational frequency range(s): sub-portion(s) of the band in the earth-to-space direction to the MSS network, for
which the equipment has been designed as declared by the applicant
Portable Equipment (PE): equipment generally intended to be self-contained, free standing and portable
NOTE: A PE would normally consist of a single module, but may consist of several interconnected modules.
radiated measurement: measurement of an actual radiated field
Special Test Equipment (STE): equipment which allows a test laboratory to control the UE so that the tests required
by the present document can be performed
ETSI

---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 302 574-3 V1.1.1 (2010-06)
spurious emissions: emissions at frequencies beyond the limit of 2,5 MHz above and below the centre frequency of the
wanted emission
NOTE: Spurious emissions are generally considered as emissions at frequencies beyond the limit of 250 % of the
necessary bandwidth above and below the centre frequency of the wanted emission. For the purposes of
the present specification, this limit is defined as frequencies which are 2,5 MHz or greater away from the
UE centre carrier frequency, where 2,5 MHz corresponds to 250 % of the maximum value o
...

Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
Harmonized European Standard (Telecommunications series)

Satellite Earth Stations and Systems (SES);
Harmonized Standard for satellite earth stations for
MSS operating in the 1 980 MHz to
2 010 MHz (earth-to-space) and 2 170 MHz to
2 200 MHz (space-to-earth) frequency bands;
Part 3: User Equipment (UE) for narrowband systems:
Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)



Reference
DEN/SES-00283-3
Keywords
MES, mobile, MSS, narrowband, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
Contents
Intellectual Property Rights Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.1 Introduction. 10
4.2.2 Unwanted emissions outside the band 1 980 MHz to 2 010 MHz (carrier-on state) . 11
4.2.2.1 Justification . 11
4.2.2.2 Technical requirements . 11
4.2.2.3 Conformance test . 13
4.2.3 Unwanted emissions within the band 1 980 MHz to 2 010 MHz (carrier-on state) . 13
4.2.3.1 Justification . 13
4.2.3.2 Technical requirements . 13
4.2.3.3 Conformance test . 15
4.2.4 Unwanted emissions in carrier-off state . 16
4.2.4.1 Justification . 16
4.2.4.2 Technical requirements . 16
4.2.4.3 Conformance test . 16
4.2.5 UE Control and Monitoring Functions (CMF) . 16
4.2.5.1 Absence of a valid network handling of output power . 16
4.2.5.1.1 Definition. 16
4.2.5.1.2 Limit . 16
4.2.5.1.3 Conformance . 17
4.2.5.2 Loss of signal handling of output power . 17
4.2.5.2.1 Definition. 17
4.2.5.2.2 Limit . 17
4.2.5.2.3 Conformance . 17
5 Testing for compliance with technical requirements . 17
5.1 Environmental conditions for testing . 17
5.2 Interpretation of the measurement results . 17
5.3 Essential radio test suites . 18
5.3.1 General . 18
5.3.1.1 Description of equipment . 18
5.3.1.2 Testing of host-connected equipment and plug-in modules . 19
5.3.1.2.1 Alternative approaches . 19
5.3.1.2.2 Alternative A: combined equipment . 19
5.3.1.2.3 Alternative B: use of a test jig . 19
5.3.1.3 CMF/ Special Test Equipment (STE) . 19
5.3.1.4 General test requirements . 20
5.3.1.4.1 UE test modes . 20
5.3.1.4.2 Special Test Equipment (STE) . 20
5.3.1.4.3 Laboratory Test Equipment (LTE) . 21
5.3.1.4.4 Methods of test for UE RF emissions according to the equipment type . 21
5.3.1.4.5 Procedures for measurement of radiated emissions . 22
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
5.3.1.4.6 Procedures for measurement of conducted emissions . 26
5.3.2 Unwanted emissions outside the band 1 980 MHz to 2 010 MHz (carrier-on state) . 28
5.3.2.1 Method of test . 28
5.3.2.2 Peak measurement . 29
5.3.2.3 Average measurement . 29
5.3.2.4 Test requirements . 29
5.3.3 Unwanted emissions within the band 1 980 MHz to 2 010 MHz (carrier-on state) . 30
5.3.3.1 Method of test . 30
5.3.3.2 Measurement method . 30
5.3.3.3 Test requirements . 31
5.3.4 Unwanted emissions in carrier-off state . 31
5.3.4.1 Method of test . 31
5.3.4.2 Measurement method . 31
5.3.4.3 Test requirements . 31
5.3.5 UE Control and Monitoring Functions (CMF) . 32
5.3.5.1 Method of test . 32
5.3.5.2 Testing of output power in absence of a valid network . 32
5.3.5.2.1 Test procedure . 32
5.3.5.2.2 Measurement method . 32
5.3.5.3 Testing of output power in loss of signal . 32
5.3.5.3.1 Test procedure . 32
5.3.5.3.2 Measurement method . 33
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 34
Annex B (informative): The EN title in the official languages . 36
Annex C (informative): Environmental profile specification . 37
C.1. Introduction . 37
C.2. Temperature . 37
C.3. Voltage . 37
C.4. Test environment . 38
Annex D (informative): Bibliography . 39
History . 40

ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
Intellectual Property Rights Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Satellite Earth Stations and Systems (SES), and is now submitted for the Public Enquiry phase of the ETSI standards
Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A.
The present document is part 3 of a multi-part deliverable covering the Harmonized Standard for satellite earth stations
for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth)
frequency bands, as identified below:
Part 1: "Complementary Ground Component (CGC) for wideband systems: Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 2: "User Equipment (UE) for wideband systems: Harmonized EN covering essential requirements of article
3.2 of the R&TTE Directive";
Part 3: "User Equipment (UE) for narrowband systems: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [1]. The modular
structure is shown in EG 201 399 [i.5].
ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
1 Scope
The present document applies to User Equipment (UE) radio equipment type which have the following characteristics:
• these UEs have both transmit and receive capabilities and operate in a Geostationary satellite network,
• these UEs operate with an assigned channel signal bandwidth (CBw) smaller than 1 MHz,
• these UEs may be handset, handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed
equipment, or may be an element in a multi-mode terminal. It may consist of a number of modules with
associated connections and user interface, or may be a self contained single unit,
• if the UE is an element in a multi-mode terminal, unless otherwise stated in the present document, its
requirements apply only to the UE element of the terminal operating in the Mobile Satellite Service (MSS)
frequency bands given in table 1.
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1.
Table 1: Mobile Satellite Service UE frequency bands
Operating band Direction of transmission UE frequency bands
UE Transmit (earth-to-space) 1 980 MHz to 2 010 MHz
I
UE Receive (space-to-earth) 2 170 MHz to 2 200 MHz

The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial space radio communications and orbital resources so as to avoid harmful interference".
NOTE 1: In addition to the unwanted emission limits defined in clause 4.2.2 of the present document, additional
operational constraints may be required to prevent harmful interference into services operating in the
neighbouring bands outside the operational band defined in table 1.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE 2: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ITU-T Recommendation O.153 (10/1992): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
[3] CISPR 16-1 (First edition): "Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus" (annex G:
Validation of the open area test site for the frequency range of 30 MHz to 1 000 MHz).
[4] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics.
[5] IEC 60068-2-1 (Sixth edition): "Environmental testing - Part 2-1: Tests - Test A: Cold".
[6] IEC 60068-2-2 (Fifth edition): "Environmental testing - Part 2-2: Tests - Test B: Dry heat".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] ETSI TR 102 215: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Recommended approach, and possible limits for measurement uncertainty for the measurement of
radiated electromagnetic fields above 1 GHz".
[i.2] ETSI EN 302 574-1: "Satellite Earth Stations and Systems (SES); Harmonized standard for
satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and
2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1: Complementary Ground
Component (CGC) for wideband systems: Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive".
[i.3] ETSI EN 302 574-2: "Satellite Earth Stations and Systems (SES); Harmonized standard for
satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and
2 170 MHz to 2 200 MHz (space to-earth) frequency bands; Part 2: User Equipment (UE) for
wideband systems: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE
Directive".
[i.4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.5] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of candidate Harmonized Standards for application under the R&TTE Directive".
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purpose of the present document, the terms and definitions given in the R&TTE Directive [1], and the following
apply:
applicant: manufacturer or his authorized representative within the European Community or the person responsible for
placing the apparatus on the market
carrier-on time (initial bursts): period when a UE is transmitting a signal
NOTE: For UEs that transmit in a non-continuous mode, the carrier-on time only includes the times when the UE
is transmitting a signal.
carrier-on state: UE is in this state when it is authorized by the NCF to transmit and when it transmits a signal
carrier-off state: UE is in this state when either it is authorized by the Network Control Facility (NCF) to transmit but
when it does not transmit any signal, or when it is not authorized by the NCF to transmit
conducted measurement: measurement of emissions from an antenna port of the UE made by direct wired connection
to the port
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
Equivalent Isotropically Radiated Power (EIRP): product of transmitter power and the antenna gain in the direction
considered, relative to an isotropic source radiating uniformly in all directions
fellow radio station: one of the (other) modes of a multimode UE
handheld: indicates a UE which is self-contained and is small enough and light enough to be carried and used during a
call with one hand
host-connected: indicates a UE for which connection to or integration with host equipment is necessary to offer
functionality
host equipment: any equipment which has a complete user functionality when not connected to the UE, and to which
the UE provides additional functionality, and to which connection is necessary for the UE to offer functionality
Installable Equipment (IE): equipment which is intended to be installed in a vehicle
NOTE: An IE may consist of one or several interconnected modules. The IE is composed of modules intended to
be externally mounted as declared by the applicant, and defined as Externally Mounted Equipment (EME)
and the remaining modules(s) as Internally Mounted Equipment (IME).
Laboratory Test Equipment (LTE): logical grouping that contains the standard test equipment provided by a test
laboratory
MSS band: continuous range of frequencies allocated by the ITU to the MSS
multimode: indicates equipment that accommodates radio stations of different radio networks
network control channel: channel by which a UE receives general control information from the NCF
NCF control message: message, normally originating from a network, to a specified terminal or set of terminals of the
network which indicates to the terminal or set of terminals that it/they should carry out some specific action or should
enter or maintain some specific state
NOTE: For test purposes NCF control messages may originate from Special Test Equipment (STE).
ETSI

---------------------- Page: 8 ----------------------
9 Draft ETSI EN 302 574-3 V1.1.0 (2009-11)
nominated bandwidth (Bn): The nominated bandwidth of the UE radio frequency transmission is nominated by the
applicant.
NOTE: The nominated bandwidth is wide enough to encompass all spectral elements of the transmission
necessary for communication and which have a level greater than the specified unwanted emissions
limits. The nominated bandwidth is wide enough to take account of the transmit carrier frequency
stability. The nominated bandwidth is centred on the transmit frequency and does not exceed 180 % of
the 3dB bandwidth of the signal. The nominated bandwidth is within the assigned part of the MSS
transmit frequency band within which the UE operates.
3 dB Bandwidth (B3dB): total width of the signal spectrum 3 dB below the maximum in-band density
operational frequency range(s): sub-portion(s) of the band in the earth-to-space direction to the MSS network, for
which the equipment has been designed as declared by the applicant
Portable Equipment (PE): equipment generally intended to be self-contained, free standing and portable
NOTE: A PE would normally consist of a single module, but may consist of several interconnected modules.
radiated measurement: measurement of an actual radiated field
Special Test Equipment (STE): equipment which allows a test laboratory to control the UE so that the tests required
by the present document can be performed
spurious emissions: emissions at frequencies beyond the limit of 2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.