iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 523.3.201 S1:1998

(Main)

Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheet 201: Heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1

Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheet 201: Heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1

Gives the requirements for heat shrinkable sleeving, general purpose, flexible, cross-linked polyvinylchloride (PVC). It is normally available in bore sizes up to 50 mm.

Bestimmung für Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen -- Blatt 201: Flexible Wärmeschrumpfschläuche aus vernetzem PVC, Standardtyp, Schrumpfhältnis 2:1

Spécification pour gaines isolantes souples -- Partie 3: Spécifications particulières aux types particuliers de gaines -- Feuille 201: Gaine souple thermorétractable en PVC réticulé, pour usage général, avec rapport de rétrécissement de 2:1

Donne les prescriptions relatives aux gaines souples thermorétractables en polychlorure de vinyle (PVC), réticulé, pour usage général. Elles sont généralement fournies dans des diamètres intérieurs allant jusqu'à 50 mm.

Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 201: Heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2 : 1 (IEC 60684-3-201:1991)

General Information

Status
Withdrawn
Publication Date
31-May-1998
Withdrawal Date
24-Apr-2023
ICS
29.035.20 - Plastics and rubber insulating materials
Technical Committee
IIZS - Insulating materials and systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Apr-2023
Due Date
14-May-2023
Completion Date
25-Apr-2023
Ref Project
HD 523.3.201 S1:1993 - Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 201: Heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1

Buy Standard

HD 523.3.201 S1:1998HD 523.3.201 S1:1998
PreviousNext
Standardization document
HD 523.3.201 S1:1998
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 523.3.201 S1:1998
01-junij-1998
Specification for flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheet 201: Heat shrinkable sleeving, general
purpose, flexible, cross-linked PVC, shrink ratio 2 : 1 (IEC 60684-3-201:1991)
Specification for flexible insulating sleeving -- Part 3: Specification requirements for
individual types of sleeving -- Sheet 201: Heat shrinkable sleeving, general purpose,
flexible, cross-linked PVC, shrink ratio 2:1
Bestimmung für Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen --
Blatt 201: Flexible Wärmeschrumpfschläuche aus vernetzem PVC, Standardtyp,
Schrumpfhältnis 2:1
Spécification pour gaines isolantes souples -- Partie 3: Spécifications particulières aux
types particuliers de gaines -- Feuille 201: Gaine souple thermorétractable en PVC
réticulé, pour usage général, avec rapport de rétrécissement de 2:1
Ta slovenski standard je istoveten z: HD 523.3.201 S1:1993
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST HD 523.3.20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60674-3-4:2022(Main)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation (IEC 60674-3-4:2022)
EN IEC 60674-3-4:2022

This International Standard gives the requirements for polyimide films used for electrical purposes.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
Safety warning: it is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60674-3-1:2021(Main)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
EN IEC 60674-3-1:2021

This sheet of IEC 60674-3 gives the requirements for biaxially oriented polypropylene film
having a smooth or rough surface, corona treated when required for vacuum metallization. The
films are for use as dielectric in capacitors.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application is based on the actual
requirements necessary for adequate performance in that application and not based on this
specification alone.
Safety warning: It is the responsibility of the user of the methods contained or referred to in this
document to ensure that they are used in a safe manner

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-280:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2019)
EN IEC 60684-3-280:2019

This document gives the requirements for heat-shrinkable, polyolefin sleeving, antitracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm. This sleeving is normally supplied in the colours red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Table A.1) provides guidance on the range of sizes available. The actual size will be agreed between the user and the supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance willbe proven as part of the assembly. Examples of this are described in HD 629.1 and IEC 60502 (all parts).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-216:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving (IEC 60684-3-216:2019)
EN IEC 60684-3-216:2019

This document gives the requirements for four types of heat-shrinkable, flameretarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below. Class A: thin wall shrink ratio 2:1 internal diameter up to 102,0 mm Class B: medium wall shrink ratio 2:1 internal diameter up to 60,0 mm Class C: thick wall shrink ratio 2:1 internal diameter up to 51,0 mm Class D: medium wall shrink ratio 3:1 internal diameter up to 40,0 mm These sleevings are normally supplied in the following colours: black, red, green, blue, white, yellow and green/yellow. Sizes or colours other than those listed in this document are available as custom items. These items are considered to comply with this document if they comply with the property requirements listed in Tables 5, 6, 7 and 8, excluding dimensions and mass. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-283:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation (IEC 60684-3-283:2019)
EN IEC 60684-3-283:2019

This document gives the requirements for two types of heat-shrinkable, polyolefin sleeving for bus-bar insulation, with a nominal shrink ratio of 2,5:1. This sleeving has been found suitable up to temperatures of 100 °C. • Type A: Medium wall - internal diameter up to 170,0 mm typically • Type B: Thick wall - internal diameter up to 165,0 mm typically These sleevings are normally supplied in colour, red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) provides guidance to the range of sizes available.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-214:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall (IEC 60684-3-214:2019)
EN IEC 60684-3-214:2019

This document gives the requirements for two types of heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. • Type A: Medium wall - internal diameter up to 200 mm typically. • Type B: Thick wall - internal diameter up to 200 mm typically. These sleevings are normally supplied in colour black. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) of this document provides a guide to the range of sizes available. The actual size will be agreed between the user and supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-247:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall (IEC 60684-3-247:2019)
EN IEC 60684-3-247:2019

This document gives the requirements for two types of heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. • Type A: Medium wall, internal diameter up to 200,0 mm typically. • Type B: Thick wall, internal diameter up to 200,0 mm typically. These sleevings are normally supplied in colour black. Since these types of sleving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) provides a guide to the range of sizes available. The actual size will be agreed between the user and supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60674-3-2:2019(Main)
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (IEC 60674-3-2:2019)
EN IEC 60674-3-2:2019

This sheet of IEC 60674-3 gives the requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60674-2:2017/A1:2019(Amendment)
Specification for plastic films for electrical purposes - Part 2: Methods of test (IEC 60674-2:2016/A1:2019)
EN 60674-2:2017/A1:2019
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60893-3-6:2004/A2:2018(Amendment)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003/A2:2017)
EN IEC 60893-3-6:2004/A2:2018
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day