ISO/FDIS 19085-6
(Main)Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (toupie)
Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (toupie)
Machines à bois — Sécurité — Partie 6: Toupies monobroches à arbre vertical
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 19085-6
ISO/TC 39/SC 4
Woodworking machines — Safety —
Secretariat: UNI
Voting begins on:
Part 6:
2023-12-07
Single spindle vertical moulding
Voting terminates on:
machines (toupie)
2024-02-01
Machines à bois — Sécurité —
Partie 6: Toupies monobroches à arbre vertical
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 19085-6:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 19085-6:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 19085-6
ISO/TC 39/SC 4
Woodworking machines — Safety —
Secretariat: UNI
Voting begins on:
Part 6:
2023-12-07
Single spindle vertical moulding
Voting terminates on:
machines (toupie)
2024-02-01
Machines à bois — Sécurité —
Partie 6: Toupies monobroches à arbre vertical
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 19085-6:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 19085-6:2023(E)
Contents Page
Foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Safety requirements and measures for controls . 9
4.1 Safety and reliability of control systems. 9
4.2 Control devices . 9
4.3 Start . 10
4.3.1 Direct start . 10
4.3.2 Start via control power-on . 11
4.4 Safe stops .
...
ISO/TC 39/SC 4
Date: 2022-01-11
ISO/FDIS 19085-6:20222023
ISO/TC 39/SC 4/WG 2
Secretariat: UNI
Woodworking machines — Safety — Part 6: Single spindle vertical moulding
machines (toupie)
Machines pour le travail du bois — Sécurité — Partie 6: Toupies monobroches à arbre
vertical
Second edition
Date: 2023-11-23
---------------------- Page: 1 ----------------------
ISO/FDIS 19085-6:2023(E)
© ISO 20222023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of
this publication may be reproduced or utilized otherwise in any form or by any means, electronic or
mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO at the address below or ISO’sISO's member body
in the country of the requester.
ISO Copyright Office
CP 401 • CH. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org copyright@iso.org
Website: www.iso.org
Published in Switzerland.
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 19085-6:2023(E)
Contents
Foreword . vi
Introduction . vii
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Safety requirements and measures for controls . 15
4.1 Safety and reliability of control systems . 15
4.2 Control devices . 15
4.3 Start . 16
4.3.1 Direct start . 16
4.3.2 Start via control power-on . 16
4.4 Safe stops . 16
4.4.1 General . 16
4.4.2 Normal stop . 16
4.4.3 Operational stop . 17
4.4.4 Emergency stop . 17
4.5 Braking function of tools . 17
4.6 Mode selection . 17
4.7 Tool speed changing . 17
4.7.1 Speed changing by shifting the belts on the pulleys . 17
4.7.2 Speed changing by incremental speed change motor . 17
4.7.3 Infinitely variable speed by frequency inverter . 17
4.7.4 Speed limiting device for tenoning . 17
4.7.5 Changing of the direction of tool rotation.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.