ISO 15583:2005

INTERNATIONAL ISO
STANDARD 15583
First edition
2005-06-01
Ships and marine technology — Maritime
standards list
Navires et technologie maritime — Liste de normes maritimes

Reference number
©
ISO 2005
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has beEN takEN to ensure that the file is suitable for use by ISO member bodies.
In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address givEN below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no Part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take Part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives — Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15583 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee
SC 9, General requirements.
INTERNATIONAL STANDARD ISO 15583:2005(E)

Ships and marine technology — Maritime standards list
1 Scope
This International Standard provides the list of existing maritime standards of ISO and eight (8) shipbuilding
nations in the world (The People’s Republic of China, Germany, India, Japan, The Republic of Korea, Poland,
Russian Federation and The United States of America) as of the year 2002 by classifying the maritime
standards of the aforesaid organization and nations into the codes that correspond to the existing organization
of subcommittees of ISO/TC 8 as specified hereunder.
2 Codes of nations
The codes of the organization and nations used in this International Standard are provided in Table 1.
3 Codes of classifications
The codes of classifications used in this International Standard are specified in Table 2.
4 Classified maritime standards list
The existing maritime standards of ISO and the aforesaid nations as of year 2002 classified in the manner as
specified in item 3 are provided in Table 3.
Table 1 — Nation
CD_NATION���� NATION���� MEM_BODY����
B� ISO� �
BR� BRAZIL� ABNT�
CN� CHINA� SAC
CU� CUBA� NC�
CS� CZECH REP.� CSNI�
DK� DENMARK� DS�
DE� GERMANY� DIN�
IN� INDIA� BIS�
UT� ITALY� UNI�
JP JAPAN JISC
KR KOREA Rep of KATS
NL� NETHERLANDS� NEN�
NO� NORWAY� SN�
PL� POLAND� PKN�
PT PORTUGAL IPQ
US� UNITED STATES� ANSI�
UZ� RUSSIA� GOST�
1� CLASSIFICATION� �
ZZ� NEW WORK ITEMS� TC 8�
Table 2 — Code table
ID�� Classification I�� Classification II�� Classification III�� Code��
�� �� �� �� ��
[01] Lifesaving and Fire
1� �� �
protection�
2� � [00] General���
3��� [00] General� 010000
[10] Terminology, Technical drawing,
4�� � 010010
Plans�
5��� [90] Others� 010090
6� � [10] Rescue boats���
7��� [00] General� 011000
8��� [90] Others� 011090
9� � [20] Ladders���
10��� [00] General� 012000
11��� [90] Others� 012090
12� � [30] Life raft���
13��� [00] General� 013000
14��� [90] Others� 013090
[40] Life boats (except launching
15�� ��
machinery)�
16��� [00] General� 014000
17��� [90] Others� 014090
18� � [90] Others���
19��� [00] General� 019000
20��� [90] Others� 019090
[02] Marine environment
21� �� �
protection�
22� � [00] General���
23��� [00] General� 020000
[10] Terminology, Technical drawing,
24�� � 020010
Plans�
25��� [90] Others� 020090
26� � [10] Oil spill equipment���
27��� [00] General� 021000
28��� [90] Others� 021090
29� � [20] Discharge water treatment���
30��� [00] General� 022000
31��� [90] Others� 022090
32� � [90] Others���
33��� [00] General� 029000
2 © ISO 2005 – All rights reserved

Table 2 (continued)
ID�� Classification I�� Classification II�� Classification III�� Code��
�� �� �� �� ��
34�� � [90] Others� 029090
[03] Piping and
35� �� �
machinery�
36� � [00] General���
37��� [00] General� 030000
[10] Terminology, Technical drawing,
38�� � 030010
Plans�
39��� [90] Others� 030090
40� � [10] Ship machinery���
41��� [00] General� 031000
42��� [10] Piping� 031010
43��� [20] Pump� 031020
44��� [30] Cocks and valves� 031030
[40] Ventilation, air cooling and air heating
45�� � 031040
installations�
46��� [50] Oil� 031050
47��� [60] Hoses� 031060
[70] Machinery, Propulsion plants,
48�� � 031070
Rudders�
49��� [90] Others� 031090
50� � [20] Incinerators���
51��� [00] General� 032000
52��� [90] Others� 032090
53� � [90] Others���
54��� [00] General� 039000
55��� [90] Others� 039090
[04] Outfitting and deck
56� �� �
machinery�
57� � [00] General���
58��� [00] General� 040000
[10] Terminology, Technical drawing,
59�� � 040010
Plans�
��
60� [90] Others� 040090
[10] Life boats launching
61�� ��
machinery�
62��� [00] General� 041000
63��� [90] Others� 041090
� ��
64� [20] Deck machinery�
65��� [00] General� 042000
Table 2 (continued)
ID�� Classification I�� Classification II�� Classification III�� Code��
�� �� �� �� ��
66�� � [10] Anchorage� 042010
67��� [20] Winches� 042020
68��� [90] Others� 042090
69� � [30] Outfitting���
70��� [00] General� 043000
71��� [10] Cargo gear� 043010
72��� [90] Others� 043090
73� � [90] Others���
��
74� [00] General� 049000
75��� [10] Ropes� 049010
��
76� [90] Others� 049090
77� [05] Ships' bridge layout��� �
78� � [00] General���
79��� [00] General� 050000
[10] Terminology, Technical drawing,
80�� � 050010
Plans�
81��� [90] Others� 050090
� ��
82� [10] Bridge layout�
83��� [00] General� 051000
84��� [90] Others� 051090
85� � [20] Instrumentation���
86��� [00] General� 052000
87��� [90] Others� 052090
88� � [90] Others���
89��� [00] General� 059000
90��� [90] Others� 059090
91� [06] Navigation��� �
92� � [00] General���
93��� [00] General� 060000
[10] Terminology, Technical drawing,
94�� � 060010
Plans�
95��� [90] Others� 060090
96� � [10] Gyro compasses���
97��� [00] General� 061000
98��� [90] Others� 061090
99� � [20] Magnetic compasses���

4 © ISO 2005 – All rights reserved

Table 2 (continued)
ID�� Classification I�� Classification II�� Classification III�� Code��
�� �� �� �� ��
100�� � [00] General� 062000
101��� [90] Others� 062090
102� � [30] Auto pilot���
103��� [00] General� 063000
104��� [90] Others� 063090
105� � [40] High speed craft equipment���
106��� [00] General� 064000
107��� [90] Others� 064090
� ��
108� [90] Others�
109��� [00] General� 069000
��
110� [90] Others� 069090
111� [07] Inland vessels��� �
112� � [00] General���
113��� [00] General� 070000
[10] Terminology, Technical drawing,
114�� � 070010
Plans�
115��� [90] Others� 070090
� ��
116� [10] Equipment and technology�
117��� [00] General� 071000
118��� [90] Others� 071090
119� � [20] Work ships���
120��� [00] General� 072000
121��� [90] Others� 072090
122� � [90] Others���
123��� [00] General� 079000
124��� [90] Others� 079090
125� [08] Structures��� �
126� � [00] General���
127��� [00] General� 080000
[10] Terminology, Technical drawing,
128�� � 080010
Plans�
129��� [90] Others� 080090
130� � [10] Windows and scuttles���
131��� [00] General� 081000
132��� [90] Others� 081090
133� � [20] Doors and hatches���

Table 2 (continued)
ID�� Classification I�� Classification II�� Classification III�� Code��
�� �� �� �� ��
134�� � [00] General� 082000
135��� [10]� 082010
136��� [90]� 082090
137� � [30] Passageways���
138��� [00] General� 083000
139��� [10] Stairs and ladders� 083010
140��� [20] Guardrails� 083020
141��� [90] Others� 083090
� ��
142� [90] Others�
143��� [00] General� 089000
��
144� [10]� 089010
145��� [90] Others� 089090
[09] General
146� �� �
requirements�
147� � [00] General���
��
148� [00] General� 090000
[10] Terminology, Technical drawing,
149�� � 090010
Plans�
150��� [90] Others� 090090
151� � [10] Sea trials���
152��� [00] General� 091000
153��� [10] Speed trials� 091010
��
154� [20] Sea trials� 091020
155��� [30] Manoeuvring� 091030
��
156� [90] Others� 091090
157� � [90] Others���
158��� [00] General� 099000
159��� [10] Corrosion� 099010
160��� [90] Others� 099090
[10] Computer
161� �� �
applications�
� ��
162� [00] General�
163��� [00] General� 100000
[10] Terminology, Technical drawing,
164�� � 100010
Plans�
165��� [90] Others� 100090
� ��
166� [90] Others�
6 © ISO 2005 – All rights reserved

Table 2 (continued)
ID�� Classification I�� Classification II�� Classification III�� Code��
�� �� �� �� ��
167�� � [00] General� 109000
168��� [90] Others� 109090
[11] Intermodal and
169� �� �
short sea shipping�
170� � [00] General���
171��� [00] General� 110000
[10] Terminology, Technical drawing,
172�� � 110010
Plans�
173��� [90] Others� 110090
174� � [90] Others���
175��� [00] General� 119000
176��� [90] Others� 119090
177� [90] Others��� �
178� � [00] General���
179��� [00] General� 900000
[10] Terminology, Technical drawing,
180�� � 900010
Plans�
181��� [90] Others� 900090
182� � [90] Others���
183��� [00] General� 909000
184��� [90] Others� 909090
Table 3 — Reference number (HEAD and S_NUMBER) and title of national standards
CODE HEAD S_NUMBER TITLE OF STANDARD NATION
Standard Practice for Preparing and Locating Emergency Station
010000 ASTM F 1270 US
Lists
Standard Guide for Location and Instruction Symbols for
010000 ASTM F 1297 US
Evacuation and Lifesaving Equipment
Standard Test Method for Shipboard Fixed Foam Firefighting
010000 ASTM F 1994 US
Systems
010000 JIS F 0090-99 Ship's safety signs JP
010000 KSV 0056 Glossary of terms for pleasure boats (Class and operator) KR
Life rafts and buoyant apparatus in ships — Marking, inscriptions
010000 PN-67/W 46441 PL
and colours
Ship's life saving appliances — Life saving signals board —
010000 PN-W- 50012:1997 PL
Requirements and tests
010010 ASTM F 1626 Standard Practice for Preparing Shipboard Fire Control Plans US
010010 IS 10548:1983 Plans for fire control and life saving equipment — symbols IN
010010 JIS F 0051-83 Symbols for lifesaving appliance and fire-fighting of ships JP
010010 KSV 0054 Pleasure boat — Vocabulary — Hull KR
010010 KSV 0061 Symbols for lifesaving appliance and fire fighting of ships KR
010090 IS 6685:1972 Life jackets IN
010090 KSV 0055 Pleasure boat — Vocabulary — Rigs KR
010090 KSV 0934 Buoyant apparatus for marine use KR
Ships and marine technology — Inflatable rescue boats — Coated
011090 ISO 15372-00 B
fabrics for inflatable chambers
Ships and marine technology — Inflatable rescue boats — Coated
011090 KSVISO 15372 KR
fabrics for inflatable chambers
Shipbuilding; embarkation ladders; identical with ISO 5489, edition
012000 DIN ISO 5489 DE
012000 DIN ISO 799 Shipbuilding; pilot ladders; identical with ISO 799, edition 1986 DE
012000 ISO 799:2004 Shipbuilding — Pilot ladders B
012000 ISO 5488-79 Shipbuilding — Accommodation ladders B
012000 ISO 5489:1986 Shipbuilding — Embarkation ladders B
Shipbuilding and marine structures — Deck machinery —
012000 ISO 7364:1983 B
Accommodation ladder winches
012000 KSVISO 5489 Shipbuilding — Embarkation ladders KR
012000 PN-83/W 52501 Shipbuilding — Rope ladders PL
012000 PN-EN 29519:1996 Shipbuilding and marine structures — Rungs for dog-step ladders PL
012000 PN-ISO 5488:1997 Shipbuilding — Accommodation ladders PL
012000 PN-ISO 7061:1997 Aluminium shore gangways for seagoing vessels PL
Shipbuilding and marine structures — Deck machinery —
012000 PN-ISO 7364:1998 PL
Accommodation ladder winches
012000 PN-W- 88032 Stairs PL
012090 IS 4383:1983 Pilot and embarkation ladders IN
012090 ISO 7061:1983 Shipbuilding — Aluminium shore gangways for seagoing vessels B
8 © ISO 2005 – All rights reserved

Table 3 (continued)
CODE HEAD S_NUMBER TITLE OF STANDARD NATION
012090 JIS F 2602-99 Vertical steel ladders JP
012090 JIS F 2603-70 Steel deck ladders JP
012090 JIS F 2605-99 Small size steel accommodation ladders JP
012090 JIS F 2612-95 Steel wharf ladders JP
012090 JIS F 2614-67 Bulwark ladders JP
012090 JIS F 2615-82 Pilot ladders JP
012090 JIS F 2617-89 Embarkation ladders JP
012090 JIS F 2621-95 Accommodation ladders JP
012090 JIS F 2622-95 Pilot
...