ISO 3098-4:2000
(Main)Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet
Documentation technique de produits — Écriture — Partie 4: Signes diacritiques et signes particuliers à l'alphabet latin
La présente partie de l'ISO 3098 spécifie les signes diacritiques et signes particuliers à l'alphabet latin à utiliser avec les caractères spécifiés dans l'ISO 3098-2. La liste de ces signes est donnée pour diverses langues dans les Tableaux 1 et 2.
General Information
- Status
- Published
- Publication Date
- 10-May-2000
- Technical Committee
- ISO/TC 10/SC 1 - Basic conventions
- Drafting Committee
- ISO/TC 10/SC 1 - Basic conventions
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 06-Oct-2022
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 06-Jun-2022
- Effective Date
- 12-May-2008
- Effective Date
- 15-Apr-2008
Overview
ISO 3098-4:2000 - part of the ISO 3098 series - defines diacritical and particular marks for the Latin alphabet used in technical product documentation and lettering. Published as the second edition in 2000, this part specifies which diacritics and special marks accompany the characters defined in ISO 3098-2, and lists their preferred dimensions and positions for a range of languages. The standard supports consistent, legible lettering in technical drawings, product documentation and CAD outputs.
Key topics and requirements
- Scope and purpose: Specifies diacritical and particular marks to be used with Latin characters from ISO 3098-2; marks are treated as characters in their own right.
- Normative references: Relies on ISO 3098-0 for general lettering requirements and on ISO 639 for language codes.
- Tables of marks: Tables 1 and 2 map diacritics and particular marks to specific languages, showing dimensions and positions for both Lettering A and Lettering B and for sloping and vertical lettering styles.
- Legibility rules: General requirements (from ISO 3098-0) apply, including formation of strokes that meet or cross at approximate right angles to maintain constant line density and avoid blotting at intersections.
- Practical specification: Dimensions and typical positions for accents and special marks are provided so that lettering is uniform across international technical documentation.
Applications and who uses it
ISO 3098-4 is useful for professionals and organizations that produce precise, multilingual technical documentation where lettering clarity matters:
- Technical drafters and CAD operators providing engineering drawings and schematics
- Technical illustrators, documentation specialists and product designers
- Quality and documentation controllers in manufacturing and engineering
- Standards committees and technical authors preparing international drawings, labels and part markings
- Localization teams ensuring correct diacritics across languages in product documentation
Practical uses include establishing lettering templates, configuring CAD lettering libraries, preparing multilingual drawings, and ensuring compliance with international documentation practices.
Related standards
- ISO 3098-0 - General requirements for lettering (normative reference)
- ISO 3098-2 - Latin alphabet, numerals and marks (characters used with this part)
- Other parts of the series: ISO 3098-1 (Part 0 renumbering planned), Part 3 (Greek), Part 5 (CAD lettering), Part 6 (Cyrillic)
- ISO 639 - Language codes used to identify languages in the tables
Keywords: ISO 3098-4, technical product documentation, lettering standard, diacritical marks, Latin alphabet, CAD lettering, international technical drawings.
Frequently Asked Questions
ISO 3098-4:2000 is a standard published by the International Organization for Standardization (ISO). Its full title is "Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet". This standard covers: La présente partie de l'ISO 3098 spécifie les signes diacritiques et signes particuliers à l'alphabet latin à utiliser avec les caractères spécifiés dans l'ISO 3098-2. La liste de ces signes est donnée pour diverses langues dans les Tableaux 1 et 2.
La présente partie de l'ISO 3098 spécifie les signes diacritiques et signes particuliers à l'alphabet latin à utiliser avec les caractères spécifiés dans l'ISO 3098-2. La liste de ces signes est donnée pour diverses langues dans les Tableaux 1 et 2.
ISO 3098-4:2000 is classified under the following ICS (International Classification for Standards) categories: 01.100.01 - Technical drawings in general. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 3098-4:2000 has the following relationships with other standards: It is inter standard links to ISO/IEC 10026-4:1995, SIST ISO 3098-3:1995, ISO 3098-3:1987. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 3098-4:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 3098-4
Second edition
2000-05-01
Technical product documentation —
Lettering —
Part 4:
Diacritical and particular marks for the Latin
alphabet
Documentation technique de produits — Écriture —
Partie 4: Signes diacritiques et signes particuliers à l'alphabet latin
Reference number
©
ISO 2000
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading
this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in
this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 3098 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 3098-4 was prepared by Technical Committee ISO/TC 10, Technical drawings, product
definition and related documentation, Subcommittee SC 1, Basic conventions.
This second edition of ISO 3098-4 cancels and replaces the first edition (ISO 3098-3:1987), which has been
technically revised.
ISO 3098 consists of the following parts, under the general title Technical product documentation — Lettering:
� Part 0: General requirements [becomes Part 1 with the next revision]
� Part 2: Latin alphabet, numerals and marks
� Part 3: Greek alphabet
� Part 4: Diacritical and particular marks for the Latin alphabet
� Part 5: CAD lettering of the Latin alphabet, numerals and marks
� Part 6: Cyrillic alphabet
INTERNATIONAL STANDARD ISO 3098-4:2000(E)
Technical product documentation — Lettering —
Part 4:
Diacritical and particular marks for the Latin alphabet
1 Scope
This part of ISO 3098 specifies diacritical and particular marks for the Latin alphabet for use together with the
c
...
NORME ISO
INTERNATIONALE 3098-4
Deuxième édition
2000-05-01
Documentation technique de produits —
Écriture —
Partie 4:
Signes diacritiques et signes particuliers à
l'alphabet latin
Technical product documentation — Lettering —
Part 4: Diacritical and particular marks for the Latin alphabet
Numéro de référence
©
ISO 2000
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
ImpriméenSuisse
ii © ISO 2000 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO, participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments de la présente partie de l’ISO 3098 peuvent faire
l’objet de droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO 3098-4 a été élaborée par le comité technique ISO/TC 10, Dessins techniques,
définition de produits et documentation y relative, sous-comité SC 1, Conventions générales.
Cette deuxième édition de l’ISO 3098-4 annule et remplace la première édition de l’ISO 3098-3:1987, dont elle
constitue une révision technique.
L'ISO 3098 comprend les parties suivantes, présentées sous le titre général Documentation technique de
produits — Écriture:
� Partie 0: Prescriptions générales [deviendra la partie 1 lors de sa prochaine révision]
� Partie 2: Alphabet latin, chiffres et signes
� Partie 3: Alphabet grec
� Partie 4: Signes diacritiques et signes particuliers à l’alphabet latin
� Partie 5: Écriture en conception assistée par ordinateur de l’alphabet latin, des chiffres et des signes
� Partie 6: Alphabet cyrillique
NORME INTERNATIONALE ISO 3098-4:2000(F)
Documentation technique de produits — Écriture —
Partie 4:
Signes diacritiques et signes pa
...














Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...