ISO/IEC ISP 12069-5:1999

INTERNATIONAL ISO/IEC
STANDARDIZED ISP
PROFILE 12069-5
First edition
1999-03-01
Information technology — International
Standardized Profiles ADFnn — Document
Filing and Retrieval (DFR) —
Part 5:
ADF13 — Common Filing and Retrieval —
Document Store Manipulation Profile
Technologies de l'information — Profils normalisés internationaux ADFnn —
Classement et recherche documentaire (DFR) —
Partie 5: ADF13 — Classement et recherche courants — Profil de
manipulation de stockage documentaire
Reference number
B C
Contents
1 Scope .1
1.1 General.1
1.2 Position within the taxonomy.1
1.3 Scenario.1
2 Normative references .2
3 Definitions .3
4 Abbreviations.3
5 Conformance.4
6 Constraints supported by ADF13.4
6.1 Support Classification.4
6.2 Support classification of service .4
Annex A (normative) Profile requirements list for this part of ISO/IEC ISP 12069 .5
A.1  DfrBind .5
A.1.1  DfrBindArgument Parameters .5
A.1.2  DfrBindResult Parameters.6
A.1.3  DfrBind Error .6
A.2  DfrUnbind.6
A.3  Create .6
A.3.1  CreateArgument Parameters.6
A.3.1.1  DfrObjectClass .7
A.3.1.2  DfrEntryName .7
A.3.1.3  EntryInformationSelection .7
A.3.1.4  DfrObjectContent .7
A.3.1.5  EntryModification.7
©  ISO/IEC 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office • Case postale 56 • CH-1211 Genève 20 • Switzerland
Printed in Switzerland
ii
© ISO/IEC
A.3.2  CreateResult Parameters . 8
A.3.3  Create Error . 8
A.4  Delete . 8
A.4.1  DeleteArgument Parameters. 8
A.4.2  DeleteResult Parameters. 8
A.4.3  Delete Error. 9
A.5  Copy . 9
A.5.1  CopyArgument Parameters. 9
A.5.1.1  Entry . 9
A.5.1.2  EntryModification. 9
A.5.1.3  SourceEntry. 10
A.5.1.4  ErrorHandlingMode. 10
A.5.1.5  DfrObjectContent . 10
A.5.2  CopyResult Parameters. 11
A.5.2.1  EntryInformation . 11
A.5.2.2  DfrEntry. 11
A.5.2.3  DfrObjectContent . 11
A.5.3  Copy Error . 12
A.6  Move . 12
A.6.1  MoveArgument Parameters . 12
A.6.1.1  Entry . 13
A.6.1.2  EntryModification. 13
A.6.2  MoveResult Parameters . 14
A.6.3  Move Error . 14
A.7  Read . 15
A.7.1  ReadArgument Parameters. 15
A.7.1.1  Entry . 15
A.7.1.2  DfrEntryName . 15
A.7.1.3  DfrPathName . 15
A.7.1.4  CharacterData. 15
iii
© ISO/IEC
A.7.1.5  EntryInformationSelection .15
A.7.1.6  AttributeSelection .15
A.7.1.7  DfrObjectClass .16
A.7.2  ReadResult Parameters.16
A.7.3  Read Error.16
A.8  Modify.16
A.8.1  ModifyArgument Parameters .16
A.8.1.1  EntryModification.17
A.8.1.2  DfrObjectContent .17
A.8.2  ModifyResult Parameters .18
A.8.2.1  EntryInformation .18
A.8.2.2  DfrEntry.18
A.8.2.3  DfrObjectContent .19
A.8.3  Modify Error.19
A.9  List.19
A.10  Search .19
A.10.1  SearchArgument Parameters.20
A.10.1.1  SearchMode.20
A.10.1.2  Limits.20
A.10.1.3  SearchDomain .20
A.10.2  SearchResult Parameters.21
A.10.3  Search Error.21
A.11  Reserve .21
A.12  Abandon.21
A.13  Error.21
A.13.1  AttributeError.22
A.13.1.1  Problems.22
A.13.1.2  AttributeProblem.23
A.13.2  NameError.23
A.13.3  AccessError .23
iv
© ISO/IEC
A.13.3.1  AccessProblem . 23
A.13.4  ReferentAccessError . 24
A.13.4.1  ReferentAccessProblem. 24
A.13.5  SecurityError . 24
A.13.6  ServiceError. 24
A.13.6.1  ServiceProblem . 24
A.13.7  AbandonedFailed. 24
A.13.8  Abandoned . 24
A.13.9  ExternalServerError . 25
A.13.10  VersionManagementError . 25
A.13.11  UpdateError . 25
A.13.12  ReservationError. 25
A.13.13  InterServerAccessError. 25
A.14  DFR-Object-Classes. 25
A.15  DFR-Attributes. 25
A.15.1  Support Classification. 25
A.15.1.1  DFR-Basic-Attribute-Set. 26
A.15.1.2  DFR-Extension-Attribute-Set . 27
A.15.2  Attribute-Types. 27
A.15.2.1  DfrAccessListElement. 28
A.15.2.2  AccessRights . 28
A.15.2.3  ValidUserKey . 28
A.15.2.4  UserKeyList . 28
A.15.2.5  DfrPurgeRequest. 29
v
© ISO/IEC
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. In
addition to developing International Standards, ISO/IEC JTC 1 has created a Special Group on Functional
Standardization for the elaboration of International Standardized Profiles.
An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard
or group of standards, together with options and parameters, necessary to accomplish a function or a set of
functions.
Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International
Standardized Profile requires approval by at least 75 % of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 12069-5 was prepared with the collaboration of
 Asia-Oceania Workshop (AOW);
 European Workshop for Open Systems (EWOS);
 Open Systems Environment Implementors’ Workshop (OIW).
ISO/IEC ISP 12069 consists of the following parts, under the general title Information technology — International
Standardized Profiles ADFnn — Document Filing and Retrieval (DFR) :
— Part 1: Introduction to the DFR ISP
— Part 2: Specification of ROSE, RTSE, ACSE, Presentation and Session protocols for use by DFR
— Part 3: ADF11 — Common Document Filing and Retrieval — Read Only Profile
— Part 4: ADF12 — Common Filing and Retrieval — Archiving Profile
— Part 5: ADF13 — Common Filing and Retrieval — Document Store Manipulation Profile
— Part 6: ADF21 — Remote Store Management — Simple Management Profile
— Part 7: ADF22 — Remote Store Management — Full Management Profile
Annex A forms an integral part of this part of ISO/IEC ISP 12069.
vi
INTERNATIONAL STANDARDIZED PROFILE  © ISO/IEC ISO/IEC ISP 12069-5:1999(E)
Information technology — International Standardized Profiles
ADFnn — Document Filing and Retrieval (DFR) —
Part 5:
ADF13 — Common Filing and Retrieval — Document Store
Manipulation Profile
1 Scope
1.1 General
This part of ISO/IEC ISP 12069 contains the overall specifications for the support of document filing and retrieval
functionality between a DFR user and a DFR server using DFR access protocol. This specification forms the
document store manipulation capabilities of Common Filing and Retrieval application functions.
For this part of ISO/IEC ISP 12069, specifications defined in ISO/IEC ISP 12069-1 and ISO/IEC ISP 12069-2 apply.
If any specification of another part of ISO/IEC ISP 12069 is used, it is explicitly indicated.
1.2 Position within the taxonomy
This part of ISO/IEC ISP 12069 is the fifth part of the DFR ISPs. The structure of the DFR ISPs is described in
ISO/IEC ISP 12069-1.
ADF13 Document Store Manipulation profile is part of the ADF1n series of profiles, called Common Filing and
Retrieval profiles. It includes the functionality of ADF11 Read Only profile (specified in ISO/IEC ISP 12069-3) and
ADF12 Archiving profile (specified in ISO/IEC ISP 12069-4).
It may be combined with any T-Profile (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport
service.
1.3 Scenario
ADF13 is intended to accomplish the document store manipulation when common filing and retrieval capabilities of
a DFR document are required.
The model used is one of a DFR user and a DFR server intercommunicating using the ADF13 profile of the DFR
protocol. This situation is illustrated in Figure 1.
Real
File Store
ADF13
DFR DFR DFR
User Server Document
Store
Figure 1 — Scenario for the use of ADF13
© ISO/IEC
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this part of
ISO/IEC ISP 12069. At the time of publication, the editions indicated were valid. All documents are subject to
revision, and parties to agreements based on this part of ISO/IEC ISP 12069 are warned against automatically
applying any more recent editions of the documents listed below, since the nature of references made by ISPs to
such documents is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of
currently valid International Standards and ISPs, and ITU-T maintains published editions of its current
Recommendations.
ISO/IEC 8326:1996,
Information technology — Open Systems Interconnection — Session service definition.
ISO/IEC 8327-1:1996,
Information technology — Open Systems Interconnection — Connection-oriented Session
protocol: Protocol specification.
ISO 8649:1988, Information processing systems — Open Systems Interconnection — Service definition for the
Association Control Service Element.
ISO 8650:1988, Information processing systems — Open Systems Interconnection — Protocol specification for the
Association Control Service Element.
ISO/IEC 8822:1994, Information technology — Open Systems Interconnection — Presentation service definition.
ISO/IEC 8823-1:1994, Information technology — Open Systems Interconnection — Connection-oriented
presentation protocol: Protocol specification.
ISO/IEC 8824:1990, Information technology — Open Systems Interconnection — Specification of Abstract Syntax
Notation One (ASN.1).
ISO/IEC 8825:1990, Information technology — Open Systems Interconnection — Specification of Basic Encoding
Rules for Abstract Syntax Notation One (ASN.1).
ISO/IEC 9072-1:1989, Information processing systems — Text communication — Remote Operations — Part 1:
Model, notation and service definition.
ISO/IEC 9072-2:1989, Information processing systems — Text communication — Remote Operations — Part 2:
Protocol specification.
ISO/IEC 9646-7:1995, Information technology — Open Systems Interconnection — Conformance testing
methodology and framework — Part 7: Implementation Conformance Statements.
ISO/IEC TR 10000-1:1995, Information technology — Framework and taxonomy of International Standardized
Profiles — Part 1: General principles and documentation framework.
ISO/IEC TR 10000-2:1995, Information technology — Framework and taxonomy of International Standardized
Profiles — Part 2: Principles and Taxonomy for OSI profiles.
ISO/IEC 10031-2:1991, Information technology — Text and office systems — Distributed-office-applications model —
Part 2: Distinguished-object-reference and associated procedures.
ISO/IEC 10166-1:1991, Information technology — Text and office systems — Document Filing and Retrieval (DFR) —
Part 1: Abstract service definition and procedures.
ISO/IEC 10166-1:1991/Amd.1:1995, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 1: Abstract service definition and procedures — Amendment 1: Minor Enhancements.
© ISO/IEC
ISO/IEC 10166-1:1991/Amd.2:1996,
Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 1: Abstract service definition and procedures — Amendment 2: Combined usage of DFR
and DTAM.
ISO/IEC 10166-1:1991/Cor.1:1994, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 1: Abstract service definition and procedures — Technical Corrigendum 1.
ISO/IEC 10166-1:1991/Cor.2:1994, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 1: Abstract service definition and procedures — Technical Corrigendum 2.
ISO/IEC 10166-1:1991/Cor.3:1994, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 1: Abstract service definition and procedures — Technical Corrigendum 3.
ISO/IEC 10166-2:1991, Information technology — Text and office systems — Document Filing and Retrieval (DFR) —
Part 2: Protocol specification.
ISO/IEC 10166-2:1991/Amd.1:1995, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 2: Protocol specification — Amendment 1: Minor enhancements for additional error.
ISO/IEC 10166-2:1991/Amd.2:1996,
Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 2: Protocol specification — Amendment 2: Combined usage of DFR and DTAM.
ISO/IEC 10166-2:1991/Cor.1:1994, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 2: Protocol specification — Technical Corrigendum 1.
ISO/IEC 10166-2:1991/Cor.2:1995, Information technology — Text and office systems — Document Filing and
Retrieval (DFR) — Part 2: Protocol specification — Technical Corrigendum 2.
ISO/IEC ISP 11188-1:1995, Information technology — International Standardized Profile — Common upper layer
requirements — Part 1: Basic connection oriented requirements.
ISO/IEC ISP 12069-1:1996, Information technology — International Standardized Profiles ADFnn — Document
Filing and Retrieval (DFR) — Part 1: Introduction to the DFR ISP.
ISO/IEC ISP 12069-2:1996, Information technology — International Standardized Profiles ADFnn — Document
Filing and Retrieval (DFR) — Part 2: Specification of ROSE, RTSE, ACSE, Presentation and Session protocols for
use by DFR.
ISO/IEC ISP 12069-3:1996,
Information technology — International Standardized Profiles ADFnn — Document
Filing and Retrieval (DFR) — Part 3: ADF11 — Common Document Filing and Retrieval — Read Only Profile.
ISO/IEC ISP 12069-4:1998, Information technology — International Standardized Profiles ADFnn — Document
Filing and Retrieval (DFR) — Part 4: ADF12 — Common Document Filing and Retrieval — Archiving Profile.
ISO/IEC ISP 12069-6:1998, Information technology — International Standardized Profiles ADFnn — Document
Filing and Retrieval (DFR) — Part 6: ADF21 — Remote Store Management — Simple Management Profile.
3 Definitions
For the purposes of this part of ISO/IEC ISP 12069, the definitions given in ISO/IEC ISP 12069-1 and ISO/IEC
ISP 12069-2 apply.
4 Abbreviations
For the purposes of this part of ISO/IEC ISP 12069, the abbreviations given in ISO/IEC ISP 12069-1 and ISO/IEC
ISP 12069-2 apply.
© ISO/IEC
5 Conformance
This part of ISO/IEC ISP 12069 states requirements upon implementation to achieve interworking. A claim of
conformance to this ADF13 is a claim that all requirements in the relevant base standards and recommendations
are satisfied, that all the requirements in ISO/IEC ISP 12069-1 and ISO/IEC ISP 12069-2 are satisfied, and that all
requirements in clause 6 and annex A of this part of ISO/IEC ISP 12069 are satisfied.
6 Constraints supported by ADF13
This clause describes the characteristics which are supported by this part of ISO/IEC ISP 12069.
The specifications of annex A are required for applications conforming to ADF13.
6.1 Support Classification
For this part of ISO/IEC ISP 12069, the constraints provided in subclause 3.2 of ISO/IEC ISP 12069-1 apply.
6.2 Support classification of service
The support classification for each operation is detailed in Table 1.
Table 1 — Support classification for DFR Operations
Operation Support Classification
DfrBind m
DfrUnbind m
Create m
Delete m
Copy m
Move m
Read m
Modify m
List m
Search m
Reserve m
Abandon o
Support classification: m: mandatory; o: optional; i: out of scope
© ISO/IEC
Annex A
(normative)
Profile requirements list for this part of ISO/IEC ISP 12069
In the event of a discrepancy becoming apparent in the body of this part of ISO/IEC ISP 12069 and the tables in this
annex, this annex is to take precedence.
In each table, "static client" means static capability required for an ADF13 user implementation, "static server"
means static capability required for an ADF13 server implementation, and "dynamic" means the dynamic behaviour
between ADF13 user and server implementations.
Table A.1 defines specific conditions (in addition to those specified in Table A.1 of ISO/IEC ISP 12069-3) that are
used to determine dynamic conditional support classification (see 3.2.2. of ISO/IEC ISP 12069-1).
Table A.1 — Specific Conditions
Symbol Condition Support
classification
TRUE FALSE
PR Reservation is requested by the client m2 x
PG Function set Full Set is implemented m2 x
PE Object class Reference is implemented m2 x
PL Object class Search-Result-List is implemented m2 x
P7 DfrObjectClass is not a DFR-Search-Result-List m2 x
P8 DfrObjectClass is a DFR-Document m2 x
P9 DfrObjectClass is a DFR-Document or a DFR-Reference m2 x
P10 SearchMode is in updatemode m2 x
P11 SearchMode is not in non-stored-search m2 x
P12 SearchMode is in new-search-stored or non-stored-search m2 x
NOTE This table defines symbols to be used for the explanatory remarks. For each symbol (PR, PL, etc.) indicated in this
table, each implementation may individually select the value "TRUE" or "FALSE". If "TRUE" is selected the value of dynamic
support classification should be replaced by the value specified in "TRUE" column. Otherwise, the value of dynamic support
classification should be replaced by the value specified in "FALSE" column.
A.1  DfrBind
This clause specifies restrictions on the DfrBind operation.
A.1.1  DfrBindArgument Parameters
This subclause specifies restrictions on the arguments used in the invocation of the DfrBind operation.
© ISO/IEC
The specifications provided in A.1.1 of ISO/IEC ISP 12069-3 apply with the following modifications:
 The entry for the "dfr-profile-selection" element is replaced by the following entry:
Element Data Type Default Static Static Dynamic Comments
Client Server
dfr-profile- OBJECT - m m m1 ISO/IEC ISP 12069-5
selection IDENTIFIER
A.1.2  DfrBindResult Parameters
This subclause specifies restrictions on the result parameters of the DfrBind operation.
The specifications provided in A.1.2 of ISO/IEC ISP 12069-3 apply.
A.1.3  DfrBind Error
This subclause specifies restrictions on the result error of the DfrBind operation.
The specifications provided in A.1.3 of ISO/IEC ISP 12069-3 apply.
A.2  DfrUnbind
This clause specifies restrictions on the DfrUnbind operation.
The specifications provided in A.2 of ISO/IEC ISP 12069-3 apply.
A.3  Create
This clause specifies restrictions on the Create operation.
A.3.1  CreateArgument Parameters
This subclause specifies restrictions on the arguments used in the invocation of the Create operation.
The specifications provided in A.3.1 of ISO/IEC ISP 12069-4 apply with the following modifications:
The entries for the "modifications", "attributes", "content" and "reservation" elements are replaced by the

following entries:
Element Data Type Default Static Static Dynamic Comments
Client Server
modifications SEQUENCE OF - o o c1 see A.3.1.5
EntryModification see Note
attributes SET OF - o m c1 [c.f. ISO/IEC 9594]
Attribute see Note
content DfrObjectContent - o m c1 see A.3.1.4; see Note
reservation Reservation - o m c1(PR) see A.9.1.5 in
ISO/IEC 12069-6
NOTE The arguments modifications, attributes and content must be specified due to the subclause 8.2.1 of ISO/IEC 10166-1.
© ISO/IEC
A.3.1.1  DfrObjectClass
This subclause specifies restrictions on the "DfrObjectClass" parameter.
The specifications provided in A.3.1.1 of ISO/IEC ISP 12069-4 apply with the following modifications:
 The entry for the "dfr-search-result-list" element is replaced by the following entry:
Element Data Type Default Static Static Dynamic Comments
Client Server
dfr-search- - - o o c1(PL) 4
result-list
A.3.1.2  DfrEntryName
This subclause specifies restrictions on the "DfrEntryName" parameter.
The specifications provided in A.7.1.2 of ISO/IEC ISP 12069-3 apply.
A.3.1.3  EntryInformationSelection
This subclause specifies restrictions on the "EntryInformationSelection" parameter.
The specifications provided in A.7.1.5 of ISO/IEC ISP 12069-3 apply.
A.3.1.4  DfrObjectContent
This subclause specifies restrictions on the "DfrObjectContent" parameter.
The specifications provided in A.3.1.4 of ISO/IEC ISP 12069-4 apply.
A.3.1.5  EntryModification
This subclause specifies restrictions on the "EntryModification" parameter.
Element Data Type Default Static Static Dynamic Comments
Client Server
EntryModification [CHOICE]
put-attribute Attribute - m m m1 [c.f. ISO/IEC 9594]
remove-attribute AttributeType - m m m1 [c.f. ISO/IEC 9594]
copy-attributes- SEQUENCE{ - m m m1 [c.f. ISO/IEC 9594]
from source: SourceEntry, see A.5.1.3
attribute-selection:
SET OF Attribute
Type OPTIONAL}
add-values Attribute - o m c1 [c.f. ISO/IEC 9594]
remove-values Attribute - o m c1 [c.f. ISO/IEC 9594]
add-values-from SEQUENCE{ - o m c1 [c.f. ISO/IEC 9594]
source: SourceEntry, see A.5.1.3
attribute-selection:
SET OF Attribute
Type OPTIONAL}
put-content DfrObjectContent - c m c2(P9) see A.3.1.4
remove-content NULL - i i x -
copy-content-from SourceEntry - c m c2(P9) see A.5.1.3
© ISO/IEC
A.3.2  CreateResult Parameters
This subclause specifies restrictions on the result parameters of the Create operation.
The specifications provided in A.3.2 of ISO/IEC ISP 12069-4 apply.
A.3.3  Create Error
This subclause specifies restrictions on the result error of the Create operation.
The specifications provided in A.3.3 of ISO/IEC ISP 12069-4 apply.
A.4  Delete
This clause specifies restrictions on the Delete operation.
A.4.1  DeleteArgument Parameters
This subclause specifies restrictions on the arguments used in the invocation of the Delete operation.
Element Data Type Default Static Static Dynamic Comments
Client Server
DeleteArgument [SEQUENCE]
entry DfrEntryName - m m c1 see A.3.1.2
CommonArguments
task-id OCTET STRING - o o c1(PA) -
reservation Reservation - - - x -
error-handling ErrorHandling -- - x -
Mode
priority ENUMERATED 1 o m c1 (size: 1 octet)
privileges Privileges - o o c1(PS) see A.11.1.1 in
ISO/IEC 12069-6
A.4.2  DeleteResult Parameters
There are no result parameters of the Delete operation.
© ISO/IEC
A.4.3  Delete Error
This subclause specifies restrictions on the result error of the Delete operation.
Element Data Type Default Static Static Dynamic Comments
Client Server
Error [CHOICE]
NameError NameError - m m m2 see A.13.2
AccessError AccessError - m m m2 see A.13.3
SecurityError SecurityError - o o c1(PS) see A.13.5
ServiceError ServiceError - m m m2 see A.13.6
Abandoned Abandoned - c c c2(PA) see A.13.8
UpdateError UpdateError - m m m2 see A.13.11
A.5  Copy
This clause specifies restrictions on the Copy operation.
A.5.1  CopyArgument Parameters
This subclause specifies restrictions on the arguments used in the invocation of the Copy operation.
The specifications provided in A.5.1 of ISO/IEC ISP 12069-4 apply with the following modifications:
 The entries for the "object-class" and "reservation" elements are replaced by the following entries:
Element Data Type Default Static Static Dynamic Comments
Client Server
object-class DfrObjectClass - o o c1 see A.3.1.1
reservation Reservation - o m c1(PR) see A.9.1.5 in
ISO/IEC ISP 12069-6
A.5.1.1  Entry
This subclause specifies restrictions on the "Entry" parameter.
The specifications provided in A.5.1.1 of ISO/IEC ISP 12069-4 apply.
A.5.1.2  EntryModification
This subclause specifies restrictions on the "EntryModification" parameter.
The specifications provided in A.3.1.5 apply with the following modifications:
© ISO/IEC
 The entries for the "put-content", "remove-content" and "copy-content-from" elements are replaced by the
following entries:
Element Data Type Default Static Static Dynamic Comments
Client Server
put-content DfrObjectContent - c m c2(P7) see A.5.1.5
remove-content NULL - c m c2(P7) -
copy-content-from SourceEntry - c m c2(P7) see A.5.1.3
A.5.1.3  SourceEntry
This subclause specifies restrictions on the "SourceEntry" parameter.
The specifications provided in A.5.1.3 of ISO/IEC ISP 12069-4 apply.
A.5.1.4  ErrorHandlingMode
This subclause specifies restrictions on the "ErrorHandlingMode" parameter.
Element Data Type Default Static Static Dynamic Comments
Client Server
ErrorHandlingMode [CHOICE]
all-or-nothing NULL - m m m1 -
until-first-warning NULL - c c c2 -
report-all-warnings NULL - c c c2 -
report-n-warnings NULL - c c c2 -
A.5.1.5  DfrObjectContent
This subclause specifies restrictions on the "DfrObjectContent" parameter.
Element Data Type Default Static Static Dynamic Comments
Client Server
DfrObjectContent [CHOICE]
document-content EXTERNAL - m m m2 -
root-group-content SEQUENCE OF -- - x -
OCTET STRING
proper-group- SEQUENCE OF - o o c1(PG) -
content OCTET STRING
reference-content DOR - o o c1(PD) [cf. ISO/IEC 10031-2]
search-result-list- DfrSearchResult -- - x -
content ListContent
© ISO/IEC
A.5.2  CopyResult Parameters
This subclause specifies restrictions on the result parameters of the Copy operation.
The specifications provided in A.5.2 of ISO/IEC ISP 12069-4 apply with the following modifications:
 The entry for the "entry-information" element is replaced by the following entry:
Element Data Type Default Static Static Dynamic Comments
Client Server
entry-information EntryInformation - c c c2(P1) see A.5.2.1
A.5.2.1  EntryInformation
This subclause specifies restrictions on the "EntryInformation" parameter.
The specifications provided in A.7.2.1 of ISO/IEC ISP 12069-3 apply with the following modifications:
 The entries for the "attributes-and-content", "content-only", "attributes-and-part-of-content" and "part-of-content-
only" elements are replaced by the following entries:
Element Data Type Default Static Static Dynamic Comments
Client Server
attributes-and- DfrEntry - m m m2 see A.5.2.2
content
content-only DfrObjectContent - m m m2 see A.5.2.3
attributes-and-part- DfrEntry - m m m2 see A.5.2.2
of-content
part-of-content-only DfrObjectContent - m m m2 see A.5.2.3
A.5.2.2  DfrEntry
This subclause specifies restrictions on the "DfrEntry" parameter.
The specifications provided in A.7.2.2 of ISO/IEC ISP 12069-3 apply with the following modifications:
 The entry for the "content" element is replaced by the following entry:
Element Data Type Default Static Static Dynamic Comments
Client Server
content DfrObjectContent - o m c1 see A.5.2.3
A.5.2.3  DfrObjectContent
The specifications provided in A.7.2.3 of ISO/IEC ISP 12069-3 apply with the following modifications:
© ISO/IEC
 The entries for the "proper-group-content" and "search-result-list-content" elements are replaced by the
following entries:
Element Data Type Default Static Static Dynamic Comments
Client Server
proper-group- SEQUENCE OF - o o c1(PG) -
content OCTET STRING
search-result-list- DfrSearchResult - o o c1(PL) -
content ListContent
A.5.3  Copy Error
This subclause specifies restrictions on the result error of the Copy operation.
The specifications provided in A.5.3 of ISO/IEC ISP 12069-4 apply.
A.6  Move
This clause specifies restrictions on the Move operation.
A.6.1  MoveArgument Parameters
This subclause specifies restrictions on the arguments used in the invocation of the Move operation.
Element Data Type Default Static Static Dynamic Comments
Client Server
MoveArgument [SEQUENCE]
CommonUpdateArguments
object-class DfrObjectClass - o o c1 (size: 1 octet)
see A.3.1.1
entry Entry - m m m1 see A.6.1.1
destination DfrEntryName - m m m1 see A.3.1.2
position GroupMember last o o c1 -
Position
modifications SEQUENCE OF - o o c1 see A.6.1.2
EntryModification
selection EntryInformation - o o c1 see A.7.1.5
Selection
reference-qos Requested-QoS- -- - x -
level
CommonArguments
task-id OCTET STRING - o o c1(PA) -
© ISO/IEC
Element Data Type Default Static Static Dynamic Comments
Client Server
reservation Reservation see o m c1(PR) see A.9.1.5 in
Note ISO/IEC ISP 12069-6
error-handling ErrorHandling -- - x -
Mode
priority ENUMERATED 1 o m c1 (size: 1 octet)
privileges Privileges - o o c1(PS) see A.11.1.1 in
ISO/IEC ISP 12069-6
NOTE The default value for the "Reservation" parameter of MoveArgument is explained in ISO/IEC 10166-1.
A.6.1.1  Entry
This subclause specifies restrictions on the "Entry" parameter.
The specifications provided in A.7.1.1 of ISO/IEC ISP 12069-3 apply with the following modifications:
 The entry for the "external" element is replaced by the following entry:
Element Data Type Default Static Static Dynamic Comments
Client S
...