ISO 7010:2019/Amd 9:2025

International
Standard
ISO 7010
Third edition
Graphical symbols — Safety colours
2019-07
and safety signs — Registered
safety signs
AMENDMENT 9
2025-04
AMENDMENT 9
Symboles graphiques — Couleurs de sécurité et signaux de
sécurité — Signaux de sécurité enregistrés
AMENDEMENT 9
Reference number
ISO 7010:2019/Amd.9:2025(en) © ISO 2025

ISO 7010:2019/Amd.9:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 7010:2019/Amd.9:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee SC 2,
Safety identification, signs, shapes, symbols and colours.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iii
ISO 7010:2019/Amd.9:2025(en)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 9
IMPORTANT — The colours represented in the electronic file of this document can be neither viewed
on screen nor printed as true representations. For the purposes of colour matching see ISO 3864-4,
which provides colorimetric and photometric properties together with, as a guideline, references
from colour order systems.
Add the following safety signs:
— M070: Use lamp in luminaire with shield,
— M071: Use anti-tip restraints,
— P081: Do not cover,
— W087: Warning; High sound volume levels,
— W088: Warning; Moving blades,
— W089: Warning; Moving gears.
All safety signs are available on the ISO Online browsing platform at https:// www .iso .org/ obp/ ui.

ISO 7010:2019/Amd.9:2025(en)
Safety sign M070: Use lamp in luminaire with shield
Reference No.
ISO 7010-M070
Referent
Use lamp in luminaire with shield

Function
To signify that the lamp must be used only in a
luminaire with a protective shield

Image content
Shining light bulb inside enclosure, with light rays
coming out from the bottom of the enclosure

Hazard
Injury such as from heat, fire, shattering, UV radiation from contact with
...