iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 14644-16:2019

(Main)

Cleanrooms and associated controlled environments — Part 16: Energy efficiency in cleanrooms and separative devices

Cleanrooms and associated controlled environments — Part 16: Energy efficiency in cleanrooms and separative devices

This document gives guidance and recommendations for optimizing energy usage and maintaining energy efficiency in new and existing cleanrooms, clean zones and separative devices. It provides guidance for the design, construction, commissioning and operation of cleanrooms. This document covers all cleanroom-specific features and can be used in different areas to optimize energy use in electronic, aerospace, nuclear, pharmaceutical, hospital, medical device, food industries and other clean air applications. It also introduces the concept of benchmarking for the performance assessment and comparison of cleanroom energy efficiencies, while maintaining performance levels to ISO 14644 requirements[2][3].

Salles propres et environnements maîtrisés apparentés — Partie 16: Efficacité énergétique dans les salles propres et les dispositifs séparatifs

Le présent document donne des lignes directrices et recommandations relatives à l'optimisation de la consommation énergétique et au maintien de l'efficacité énergétique dans les salles propres nouvelles et existantes, les zones propres et les dispositifs séparatifs. Il fournit des recommandations relatives à la conception, la construction, la mise en service et l'exploitation des salles propres. Il couvre toutes les caractéristiques spécifiques aux salles propres et peut être utilisé dans différents domaines pour optimiser l'usage énergétique dans les industries électronique, aérospatiale, nucléaire, pharmaceutique, établissements de santé, des dispositifs médicaux et agroalimentaires, ainsi que dans d'autres applications à air propre. Il intègre également le concept d'analyse comparative des performances pour l'évaluation des performances et la comparaison des efficacités énergétiques des salles propres, tout en maintenant les niveaux de performance aux exigences de l'ISO 14644[2][3].

General Information

Status
Published
Publication Date
23-May-2019
ICS
13.040.35 - Cleanrooms and associated controlled environments
Technical Committee
ISO/TC 209 - Cleanrooms and associated controlled environments
Drafting Committee
ISO/TC 209 - Cleanrooms and associated controlled environments
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024
Ref Project

Relations

Consolidates
ISO/IEC 10646:2003 - Information technology — Universal Multiple-Octet Coded Character Set (UCS)
Effective Date
06-Jun-2022

Buy Standard

ISO 14644-16:2019 - Cleanrooms and associated controlled environmentsISO 14644-16:2019 - Cleanrooms and associated controlled environments
PreviousNext
Standard
ISO 14644-16:2019 - Cleanrooms and associated controlled environments
English language
43 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 14644-16:2019 - Salles propres et environnements maîtrisés apparentésISO 14644-16:2019 - Salles propres et environnements maîtrisés apparentés
PreviousNext
Standard
ISO 14644-16:2019 - Salles propres et environnements maîtrisés apparentés
French language
46 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14644-16
First edition
2019-05
Cleanrooms and associated controlled
environments —
Part 16:
Energy efficiency in cleanrooms and
separative devices
Salles propres et environnements maîtrisés apparentés —
Partie 16: Efficacité énergétique dans les salles propres et les
dispositifs séparatifs
Reference number
ISO 14644-16:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 14644-16:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14644-16:2019(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms . 1
3.2 Terms related to installation . 3
3.3 Terms related to energy efficiency . . 4
3.5 Abbreviated terms . 4
4 Energy reduction evaluation and implementation process . 5
4.1 General . 5
4.2 New or existing cleanrooms . 6
4.3 Energy performance comparison . 7
4.3.1 General. 7
4.3.2 Compare energy performance . 7
4.3.3 Determine the business case . 7
4.3.4 Monitor and review . 7
4.4 Existing cleanroom retrofit or renovation . 7
4.5 Process for existing cleanrooms . 8
4.5.1 Select project team .
...

NORME ISO
INTERNATIONALE 14644-16
Première édition
2019-05
Salles propres et environnements
maîtrisés apparentés —
Partie 16:
Efficacité énergétique dans les salles
propres et les dispositifs séparatifs
Cleanrooms and associated controlled environments —
Part 16: Energy efficiency in cleanrooms and separative devices
Numéro de référence
ISO 14644-16:2019(F)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 14644-16:2019(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 14644-16:2019(F)

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
3.1 Termes généraux . 1
3.2 Termes relatifs à l’installation . 3
3.3 Termes relatifs à l’efficacité énergétique. 4
3.4 Termes abrégés . 5
4 Évaluation de la réduction d’énergie et processus de mise en œuvre .5
4.1 Généralités . 5
4.2 Salles propres nouvelles ou existantes . 6
4.3 Comparaison de la performance énergétique . 7
4.3.1 Généralités . 7
4.3.2 Comparer la performance énergétique . 7
4.3.3 Détermination de l’analyse de rentabilité . 7
4.3.4 Surveillance et examen . 7
4.4 Rénovation ou modernisation d’une salle propre existante . 7
4.5 Processus pour des salles propres existantes . 8
4.5.1 Sélection de l’équipe de projet . 8
4.5.2 Examen de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 14644-18:2023(Main)
Cleanrooms and associated controlled environments — Part 18: Assessment of suitability of consumables

This document gives guidance for assessing personal and non-personal consumables for their appropriate use in cleanrooms, clean zones or controlled zones, based on product and process requirements, cleanliness attributes and functional performance properties. The cleanliness attributes addressed are particles or chemicals in air or on surfaces. Biocontamination (viable particles, microorganisms or pyrogens) is considered as a special property of consumables. Identification of associated risks are considered. This document complements cleanroom operation as outlined in ISO 14644-5. This document gives guidance concerning: — determination of cleanroom suitability of consumables in general; — specification of requirements for an intended use of a consumable by the customer with respect to functional performance, cleanliness attributes and special properties; — specification of properties for a designed use of a consumable by supplier; — assessment of a consumable for an appropriate use; — documentation. Informative annexes are used to list examples for personal and non-personal consumables, verification methods for cleanliness attributes testing and the potential impact of consumables on a cleanroom. Cleaning agents, disinfectants and lubricants are considered as consumables with respect to their packaging, as their packaging is likely to have cleanliness requirements in common with all consumables. This document does not apply to: — design details of consumables; — testing of functional performance of materials, e.g. barrier properties of gloves, wear and slip resistance of flooring; — health and safety requirements; legal requirements can apply in specific countries; — cleanability; — (raw) materials which are added within the production process as ingredients; — performance or function testing; — transport containers; — process media such as gases or liquids; — the functional performance of cleaning agents, disinfectants and lubricants.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    41 pages
    French language
    sale 15% off
ISO
ISO/TR 14644-21:2023(Main)
Cleanrooms and associated controlled environments — Part 21: Airborne particle sampling techniques

This document discusses the physical limitations of probe and particle counter placement, and any tubing that connects the two, particularly in providing representative samples where particles 5 micrometres and greater are of interest. The document further identifies the key factors of sampling performance when classifying and monitoring, and good practice to determine and maintain an acceptable compromise between attainable accuracy in counting and feasibility of counting in real-life situations. This document includes a decision tree, used to identify key considerations when sampling airborne particles, and whether the system requires further assessment. There are also examples provided to illustrate typical application challenges and show how the decision tree can be used. It is assumed that this document is read in conjunction with ISO 14644-1 and ISO 14644-2. This document is not a manual, but an explanatory document. It does not describe measurement methods, which is handled in ISO 14644-1 and ISO 14644-2, but provides information to help make effective choices of sampling configuration, when evaluating a new or existing system.

  • Technical report
    26 pages
    English language
    sale 15% off
ISO
ISO 14644-4:2022(Main)
Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up

This document specifies the process for creating a cleanroom from requirements through to its design, construction and start-up. It applies to new, refurbished and modified cleanroom installations. It does not prescribe specific technological or contractual means of achieving these requirements. It is intended for use by users, specifiers, designers, purchasers, suppliers, builders and performance verifiers of cleanroom installations. The primary cleanliness consideration is airborne particle concentration. Detailed checklists are provided for the requirements, design, construction and start-up, which include important performance parameters to be considered. Energy management design approaches are identified to support an energy-efficient cleanroom design. Construction guidance is provided, including requirements for start-up and verification. A basic element of this document is consideration of aspects, including maintenance, that will help to ensure continued satisfactory operation for the entire life cycle of the cleanroom. NOTE Further guidance is given in Annexes A to D. ISO 14644-1, ISO 14644-2, ISO 14644-8, ISO 14644-9, ISO 14644-10, ISO 14644-12 and ISO 14644-17 provide complementary information. ISO 14644-7 offers guidance on design, construction and requirements for separative devices (clean air hoods, glove boxes, isolators and mini-environments). The following subjects are mentioned but not addressed in this document: — specific operational activities, processes to be accommodated and process equipment in the cleanroom installation; — fire and safety regulations; — ongoing operation, cleaning and maintenance activities, which are covered by ISO 14644-5.

  • Standard
    57 pages
    English language
    sale 15% off
ISO
ISO 14644-8:2022(Main)
Cleanrooms and associated controlled environments — Part 8: Assessment of air cleanliness by chemical concentration (ACC)

This document establishes typical assessment processes to determine grading levels of air chemical cleanliness (ACC) in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category), and provides a protocol to include test methods, analysis and time-weighted factors for their determination. This document currently considers only concentrations of air chemical contaminants between 100 g/m3 and 10−12 g/m3 under cleanroom operational conditions. This document is not relevant for application in those industries, processes or productions where the presence of airborne chemical substances is not considered a risk to the product or process. It is not the intention of this document to describe the nature of air chemical contaminants. This document does not give a classification of surface chemical contamination.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 14644-9:2022(Main)
Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration

This document establishes a procedure for the assessment of particle cleanliness levels on solid surfaces in cleanrooms and associated controlled environment applications. Recommendations on testing and measuring methods, as well as information about surface characteristics, are given in Annexes A to D. This document applies to all solid surfaces in cleanrooms and associated controlled environments, such as walls, ceilings, floors, working environments, tools, equipment and products. The procedure for the assessment of surface cleanliness by particle concentration (SCP) is limited to particles of between 0,05 µm and 500 µm. The following issues are not considered in this document: — requirements for the cleanliness and suitability of surfaces for specific processes; — procedures for the cleaning of surfaces; — material characteristics; — references to interactive bonding forces or generation processes that are usually time-dependent and process-dependent; — selection and use of statistical methods for assessment and testing; — other characteristics of particles, such as electrostatic charge, ionic charges and microbiological state.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
ISO
ISO 14644-10:2022(Main)
Cleanrooms and associated controlled environments — Part 10: Assessment of surface cleanliness for chemical contamination

This document establishes appropriate testing processes to determine the cleanliness of surfaces in cleanrooms with regard to the presence of chemical compounds or elements (including molecules, ions, atoms and particles). This document is applicable to all solid surfaces in cleanrooms and associated controlled environments such as walls, ceilings, floors, worksurfaces, tools, equipment and devices. NOTE 1 For the purpose of this document, consideration is only given to the chemical characteristics of a particle. The physical properties of the particle are not considered and this document does not cover the interaction between the contamination and the surface. NOTE 2 This document does not include the contamination generation process or any time-dependent influences (e.g. deposition, sedimentation, ageing) or process-dependent activities such as transportation and handling. Neither does it include guidance on statistical quality-control techniques to ensure compliance.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off
ISO
ISO 14644-17:2021(Main)
Cleanrooms and associated controlled environments — Part 17: Particle deposition rate applications

This document gives direction on the interpretation and application of the results of the measurement of particle deposition rate on one or more vulnerable surfaces in a cleanroom as part of a contamination control programme. It provides some instructions on how to influence the particle deposition rate and reduce the risk of particle contamination on vulnerable surfaces. This document gives information on how a cleanroom user can use the particle deposition rate measurements to determine limits that can be set for macroparticles on vulnerable surfaces. It also gives a risk assessment method by which an acceptable risk of deposition of particles onto vulnerable surfaces in a cleanroom can be established and, when this is not achieved, methods that can be used to reduce the particle deposition rate. An alternative to the particle deposition rate is the particle obscuration rate which determines the rate of increase of coverage of particles onto an area of surface over time. The particle obscuration rate can be used in an analogous way to the particle deposition rate and the required particle obscuration rate for a specified surface can be calculated and the risk from deposited particles reduced. This document does not: — provide a method to classify a cleanroom with respect to particle deposition rate or particle obscuration rate; — directly consider the deposition of microbe-carrying particles, although they can be treated as particles; — give any consideration to surface deposition by contact as, for example, when personnel touch a product and contamination is transferred.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 14644-3:2019(Main)
Cleanrooms and associated controlled environments — Part 3: Test methods

This document provides test methods in support of the operation for cleanrooms and clean zones to meet air cleanliness classification, other cleanliness attributes and related controlled conditions. Performance tests are specified for two types of cleanrooms and clean zones: those with unidirectional airflow and those with non-unidirectional airflow, in three possible occupancy states: as-built, at-rest and operational. The test methods, recommended test apparatus and test procedures for determining performance parameters are provided. Where the test method is affected by the type of cleanroom or clean zone, alternative procedures are suggested. For some of the tests, several different methods and apparatus are recommended to accommodate different end-use considerations. Alternative methods not included in this document can be used by agreement between customer and supplier. Alternative methods do not necessarily provide equivalent measurements. This document is not applicable to the measurement of products or of processes in cleanrooms, clean zones or separative devices. NOTE This document does not purport to address safety considerations associated with its use (for example, when using hazardous materials, operations and equipment). It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    52 pages
    English language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
ISO
ISO 14644-12:2018(Main)
Cleanrooms and associated controlled environments — Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration

This document covers the monitoring of air cleanliness by particles in terms of concentration of airborne nanoscale particles. For monitoring purposes, only populations of particles with a lower size limit of 0.1 microns (100 nm) or less ? "nanoscale" ? are considered. The monitoring given in this document is for use mainly in "operational" states. NOTE 1 For the purposes of this document, reference is made to "nanoscale particles", which means all nano-objects having one (nanoplate), two (nanofibre) or three (nanoparticle) dimensions in the nanoscale. NOTE 2 As a consequence, the specifications for monitoring air cleanliness by nanoscale particle concentration of the cleanroom in operational state also considers process specifics, e.g., used equipment, personnel behaviour, etc. NOTE 3 Health and safety considerations are excluded from this document.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 14644-15:2017(Main)
Cleanrooms and associated controlled environments — Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration

ISO 14644-15:2017 provides requirements and guidelines for assessing the chemical airborne cleanliness of equipment and materials which are foreseen to be used in cleanrooms and associated controlled environments which are linked to the ISO standard for cleanliness classes by chemical concentration (see ISO 14644‑8). The following are outside the scope of ISO 14644-15:2017: - health and safety requirements; - compatibility with cleaning agents and techniques; - cleanability; - biocontamination; - specific requirements of equipment and materials for processes and products; - design details of equipment.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off