ISO 7755-6:2013
(Main)Hardmetal burrs - Part 6: Arch round- (ball-) nose burrs (style F)
Hardmetal burrs - Part 6: Arch round- (ball-) nose burrs (style F)
ISO 7755-6:2013 specifies the main dimensions of the cutting part for hardmetal burrs of arch shape, with a round (ball ) nose and designated by the symbol F.
Fraises-limes en métaux-durs — Partie 6: Fraises-limes ogives à bout rond (forme F)
L'ISO 7755-6:2013 spécifie les dimensions de la partie coupante des fraises-limes en métaux-durs de forme cylindrique et désignées par le symbole F.
General Information
- Status
- Published
- Publication Date
- 07-Aug-2013
- Current Stage
- 9060 - Close of review
- Completion Date
- 04-Jun-2029
Relations
- Effective Date
- 06-Jun-2022
- Effective Date
- 07-Oct-2012
Overview
ISO 7755-6:2013 is an international standard developed by the International Organization for Standardization (ISO) that specifies the main dimensions for hardmetal burrs of arch shape with a round (ball) nose, designated as style F. This standard focuses exclusively on the cutting part dimensions of these precision rotary cutting tools widely used in metalworking and related industries.
This second edition of ISO 7755-6 updates and replaces the initial 1984 version, ensuring the industry benefits from standardized dimensions tailored for optimal interchangeability, precision, and performance in tooling applications involving hardmetal burrs.
Key Topics
Scope & Application
ISO 7755-6:2013 defines the critical dimensional parameters of arch-shaped, round-nose hardmetal burrs - tools essential for fine cutting, shaping, and surface finishing in advanced manufacturing contexts.Cutting Part Dimensions
The standard provides clear specifications for:- Cutting diameter (d)
- Profile radius (R)
- Cutting edge length (l)
These dimensions are essential for manufacturers and users to ensure compatibility and effectiveness of burr tools in precise machining operations.
Tolerance and Compatibility
Detailed tolerances relating to the cutting diameter, helix angle, direction of cut, and shank dimensions are managed under ISO 7755-1, which specifies general requirements for hardmetal burrs. This separation of requirements helps maintain clarity in design and quality control.Designations and Symbols
Symbols such as ‘F’ for arch round (ball) nose burrs allow for standardized designation and easy identification in procurement and manufacturing workflows.Relationship to ISO 13399
Annex A explains how designations in ISO 7755-6 relate to the ISO 13399 series, which governs cutting tool data representation and exchange, facilitating digital tool management and integration in CAD/CAM systems.
Applications
Hardmetal burrs conforming to ISO 7755-6:2013 are widely used in various sectors including:
Precision Metalworking
Ideal for deburring, shaping, and finishing metal surfaces with intricate contours where precision cutting edges are essential.Mold and Die Making
Arch round (ball) nose burrs provide smooth finishes on complex mold cavities and die surfaces, improving final product quality.Aerospace and Automotive Manufacturing
Used for tooling tasks requiring high durability and accurate milling in hard materials.Tool Maintenance and Repair
Essential in finishing operations of cutting tools themselves or intricate mechanical parts needing precise material removal.
Utilizing burrs standardized under ISO 7755-6 guarantees consistency in tool performance, reduces manufacturing variances, and supports interoperability between different suppliers and machinery.
Related Standards
ISO 7755-1: General Specifications for Hardmetal Burrs
Covers tolerances on dimensions, shank details, and cutting direction pertinent to all burr styles.Other Parts of ISO 7755 Series
- Part 2: Cylindrical burrs (style A)
- Part 3: Cylindrical round (ball) nose burrs (style C)
- Part 4: Spherical burrs (style D)
- Part 5: Oval burrs (style E)
- Part 7: Arch pointed-nose burrs (style G)
- Part 8: Flame burrs (style H)
- Part 9: Cone burrs (styles J, K)
- Part 10: Conical round (ball) nose burrs (style L)
ISO 13399 Series: Cutting Tool Data Representation
Facilitates standardized digital exchange of tool geometry and cutting data.
Practical Value
Adoption of ISO 7755-6:2013 ensures tool manufacturers and users benefit from uniform specifications that streamline production processes, enhance compatibility of tooling components, and improve the quality of finished products in precision machining fields. The alignment with internationally recognized technical standards simplifies procurement, reduces lead times, and supports innovation through standardized tool data exchange protocols.
Keywords: ISO 7755-6, hardmetal burrs, arch round nose burrs, style F, cutting tool standards, metalworking burrs, cutting diameter, profile radius, cutting edge length, ISO 13399, tool dimension standards, precision machining tools.
ISO 7755-6:2013 - Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F) Released:8/8/2013
ISO 7755-6:2013 - Fraises-limes en métaux-durs — Partie 6: Fraises-limes ogives à bout rond (forme F) Released:8/8/2013
Frequently Asked Questions
ISO 7755-6:2013 is a standard published by the International Organization for Standardization (ISO). Its full title is "Hardmetal burrs - Part 6: Arch round- (ball-) nose burrs (style F)". This standard covers: ISO 7755-6:2013 specifies the main dimensions of the cutting part for hardmetal burrs of arch shape, with a round (ball ) nose and designated by the symbol F.
ISO 7755-6:2013 specifies the main dimensions of the cutting part for hardmetal burrs of arch shape, with a round (ball ) nose and designated by the symbol F.
ISO 7755-6:2013 is classified under the following ICS (International Classification for Standards) categories: 25.100.20 - Milling tools. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 7755-6:2013 has the following relationships with other standards: It is inter standard links to ISO 17872:2019, ISO 7755-6:1984. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 7755-6:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 7755-6
Second edition
2013-08-15
Hardmetal burrs —
Part 6:
Arch round- (ball-) nose burrs (style F)
Fraises-limes en métaux-durs —
Partie 6: Fraises-limes ogives à bout rond (forme F)
Reference number
©
ISO 2013
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
Annex A (informative) Relationship between designations in this part of ISO 7755 and the
ISO 13399 series . 3
Bibliography . 4
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development
...
NORME ISO
INTERNATIONALE 7755-6
Deuxième édition
2013-08-15
Fraises-limes en métaux-durs —
Partie 6:
Fraises-limes ogives à bout rond
(forme F)
Hardmetal burrs —
Part 6: Arch round- (ball-) nose burrs (style F)
Numéro de référence
©
ISO 2013
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Dimensions . 1
Annexe A (informative) Relation entre les désignations de la présente partie de l’ISO 7755 et
l’ISO 13399 (toutes les parties) . 2
Bibliographie . 3
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/CEI, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/CEI, Partie 2, www.iso.
org/directives.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant les
références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de l’élaboration
du document sont indiqués dans l’Introduction et/ou sur la liste ISO des déclarations de brevets reçu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...