ISO 24322:2024
(Main)Timber structures — Methods of test for evaluation of long-term performance — Part 1: Wood-based products in bending
Timber structures — Methods of test for evaluation of long-term performance — Part 1: Wood-based products in bending
This document gives methods of determination of duration of load and creep factors under bending actions at ambient temperatures for a defined population of structural timber products such as solid timber, LVL, OSB, plywood, particleboard, I-beams calculated from test values. It presents methods for a) determining the duration of load and creep factors for new timber products, b) establishing whether a previously defined set of duration of load and creep factors can be applied to a tested product, and c) an optional method for establishment of sensitivity of duration of load and creep factors to changes in environmental conditions. NOTE 1 This document is intended to apply to wood-based products for which a duration of load factor or a creep factor is used in design. NOTE 2 The effect of elevated temperature on the duration of load factor and creep factor that is derived using these methods for use with timber products can need additional consideration.
Structures en bois — Méthodes d'essai pour l'évaluation du comportement à long terme — Partie 1: Produits à base de bois en flexion
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 24322
First edition
Timber structures — Methods of
test for evaluation of long-term
performance — Part 1: Wood-based
products in bending
Structures en bois — Méthodes d'essai pour l'évaluation du
comportement à long terme — Partie 1: Produits à base de bois en
flexion
PROOF/ÉPREUVE
Reference number
ISO 24322:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 24322:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 24322:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols (and abbreviated terms) . 2
5 Reference population .3
6 Sampling . 4
6.1 Sampling method . 4
6.2 Matched groups within a sample . 4
6.3 Sample size . 4
7 Sample conditioning prior to testing .5
8 Bending tests . 5
8.1 Test method . 5
8.1.1 General . 5
8.1.2 Load location on specimens . 5
8.1.3 Load configuration . 5
8.1.4 Deformation measurements . 6
8.1.5 Reporting failure results .
...
Style Definition
...
Style Definition
...
Style Definition
...
ISO/PRF 24322
Style Definition
...
ISO/TC 165/WG10/N 000
Style Definition
...
Style Definition
Date: 2023-10-19 .
Style Definition
...
ISO 24322:2023(E)
Style Definition
...
Style Definition
ISO/TC 165/WG 10
...
Style Definition
...
Secretariat: SCC
Style Definition
...
Date: 2023-xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Timber structures — Methods of test for evaluation of long-term
Style Definition
...
performance –— Part 1: woodWood-based products in bending
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
---------------------- Page: 1 ----------------------
Copyright notice
ThisStructures en bois — Méthodes d'essai pour l'évaluation du comportement à long terme — Partie 1:
Produits à base de bois en flexion
PROOF
---------------------- Page: 2 ----------------------
ISO/PRF 24322:2023(E) Font: 11 pt
Formatted:
Formatted: Font: 11 pt
Formatted: Header, Space After: 0 pt, Line spacing:
single
© ISO document is a working draft2023
Left: 1.9 cm, Right: 1.9 cm, Gutter: 0 cm,
Formatted:
All rights reserved. Unless otherwise specified, or committee draft and is copyright-protected by ISO. While required
Header distance from edge: 1.27 cm, Footer distance
in the reproductioncontext of working drafts or committee drafts in any form for use by participants in the ISO
from edge: 0.5 cm
standards development process is permitted without prior permission from ISO, neither its implementation, no part
of this document nor any extract from itpublication may be reproduced, stored or utilized otherwise in any form or
transmitted in any form for any other purposeby any means, electronic or mechanical, including photocopying, or
posting on the internet or an intranet, without prior written permission. Permission can be requested from either
ISO.
Requests for permission to reproduce this document for at the purpose of selling it should be addressed as
Formatted: Adjust space between Latin and Asian text,
shownaddress below or to ISO’s member body in the country of the requester:. Adjust space between Asian text and numbers
[Indicate :
the full address
telephone number
fax number
telex number
and electronic ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail address: copyright@iso.org
Formatted: Font: Not Italic, French (France)
Formatted: French (France)
as appropriate, of the Copyright Manager of the ISO member body responsible for the secretariat of the TC or SC within
the framework of which the draft has been prepared] Formatted: zzCopyright address, Indent: First line: 0
cm, Adjust space between Latin and Asian text, Adjust
space between Asian text and numbers
Reproduction for sales purposes may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved
---------------------- Page: 3 ----------------------
ISO/PRF 24322:2023(E) Font: 11 pt
Formatted:
Formatted: Font: 11 pt
Formatted: Header, Left, Space After: 0 pt, Line
Contents Page spacing: single
Adjust space between Latin and Asian text,
Formatted:
Foreword . vii
Adjust space between Asian text and numbers, Tab
stops: Not at 17.2 cm
Introduction. viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.