ISO/IEC 29199-4:2010/Amd 1:2014

INTERNATIONAL ISO/IEC
STANDARD 29199-4
First edition
2010-08-01
AMENDMENT 1
2014-08-15
Information technology — JPEG XR
image coding system —
Part 4:
Conformance testing
AMENDMENT 1: Additional JPEG XR
conformance test streams
Technologies de l’information — Système de codage d’image JPEG
XR —
Partie 4: Essai de conformité
AMENDEMENT 1: Flux d’essai de conformité JPEG XR supplémentaires
Reference number
ISO/IEC 29199-4:2010/Amd.1:2014(E)
©
ISO/IEC 2014

---------------------- Page: 1 ----------------------
ISO/IEC 29199-4:2010/Amd.1:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 29199-4:2010/Amd.1:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee
SC 29, Coding of audio, picture, multimedia and hypermedia information.
© ISO/IEC 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 29199-4:2010/Amd.1:2014(E)

Summary
This minor enhancement of Rec. ITU.T T.834 | ISO/IEC 29199-4 extends and enhances the set of test
streams for Rec. ITU.T T.832 | ISO/IEC 29199-2 in two ways: First, additional test streams cover
features than had either not yet been tested in earlier revisions or did not exist in earlier versions in the
standard. Second, extensions made to Rec. ITU.T T.802 | ISO/IEC 15444-2 allow the wrapping of JPEG XR
codestreams in the JPEG 2000 file format, for which new reference streams are included.
Three new test streams cover the “red-blue not swapped” flag recently introduced in Rec. ITU.T T.832
| ISO/IEC 29199-2, and the DCLP-QP flag, which was not covered in earlier tests. The “trim-flexbits”
feature was only partially tested in earlier revisions of this Recommendation | International Standard,
and test streams for this have been added. An additional set of test streams covers the spatial rotation
feature of JPEG XR known as “SPATIAL_XFRM_SUBORDINATE”.
The second block of tests cover the new boxed-based file format introduced in AMD.3 of Rec. ITU-T T.802 |
ISO/IEC 15444-2.
The new set of test streams is not included as an electronic attachment to this text due to size constraints,
but is available at the following URL:
http://wftp3.itu.int/av-arch/video-site/jpegxr/JXR_ConformanceSuite_2013.zip
iv © ISO/IEC 2014 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 29199-4:2010/Amd.1:2014(E)
Information technology — JPEG XR image coding system —
Part 4:
Conformance testing
AMENDMENT 1: Additional JPEG XR conformance test streams
Add the following subclauses at the end of Clause 7:
7.9 Output_Bitdepth_16
— CarHandle_Spat_Ov0_1x1_YUV444.jxr
7.10 Special_QP
— Seattle_Ov0_QPIndex0.jxr
— Seattle_Ov0_ScaleFlag0_QP31.jxr
— Seattle_Ov0_ScaleFlag0_QP32.jxr
— Seattle_Ov0_ScaleFlag0_QP47.jxr
— Seattle_Ov0_ScaleFlag0_QP48.jxr
— Seattle_Ov0_ScaleFlag1_QP15.jxr
— Seattle_Ov0_ScaleFlag1_QP16.jxr
— Seattle_Ov1_QPIndex0.jxr
— Seattle_Ov1_ScaleFlag0_QP31.jxr
— Seattle_Ov1_ScaleFlag0_QP32.jxr
— Seattle_Ov1_ScaleFlag0_QP47.jxr
— Seattle_Ov1_ScaleFlag0_QP48.jxr
— Seattle_Ov1_ScaleFlag1_QP15.jxr
— Seattle_Ov1_ScaleFlag1_QP16.jxr
7.11 Flags_And_Tiles
— Seattle_Ov0_1x1_IndexTable0.jxr
— Seattle_Ov1_1x1_IndexTable0.jxr
7.15 Output_Colour_Format_Baseline
— Maui_Spat_16bppGray.jxr
— Maui_Spat_32bppBGR.jxr
© ISO/IEC 2014 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO/IEC 29199-4:2010/Amd.1:2014(E)

7.16 Output_Colour_Format_Main
— 3channel16_noprof_noalpha_Spat.jxr
— 3channel_noprof_noalpha_Spat.jxr
— 4channel16_noprof_noalpha_Spat.jxr
— 4channel_noprof_noalpha_Spat.jxr
7.21 Levels
— Level255_cols_Spat_1x1.jxr
— Level255_raws_Spat_1x1.jxr
— Level16_cols_Spat_1x1.jxr
— Level16_rows_Spat_1x1.jxr
— Level4_cols_Spat_1x1.jxr
— Level4_rows_Spat_1x1.jxr
— Level8_cols_Spat_1x1.jxr
— Level8_rows_Spat_1x1.jxr
7.25 Tag_Based_Container
— Boats1_IFD_Tags_ByteCount0.jxr
— Boats2_IFD_Tags_ByteCount0.jxr
— Seattle_IFD_Tags_ByteCount0.jxr
7.27 Reference file set Red-Blue-Not-Swapped
This collection of 6 .jxr files contains images in the BGR555, BGR565 and BGR101010 colour format that
make use of the RED_BLUE_SWAPPED_FLAG of the codestream, indicating a component order in which
red is in the first and blue in the last channel. The set consists of the files
— Maui_555_RBns_Flg_Off.jxr
— Maui_555_RBns_Flg_On.jxr
— Maui_565_RBns_Flg_Off.jxr
— Maui_565_RBns_Flg_On.jxr
— Maui_101010_RBns_Flg_Off.jxr
— Maui_101010_RBns_Flg_On.jxr
7.28 Reference file set Use-DCLP-QP-Flag
In this collection of 7 .jxr files, the variable quantization options of JPEG XR “USE_DC/LP_QP_FLAG” are
tested and the number of quantizer for the three bands (DC,LP,HP) are varied between one, four, eight
and 16. The set consists of the files:
— Seattle_L01n_H12u.jxr
2 © ISO/IEC 2014 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC 29199-4:2010/Amd.1:2014(E)

— Seattle_L01u_H12n.jxr
— Seattle_L08n_H04u.jxr
— Seattle_L08u_H04n.jxr
— Seattle_L08u_H04u.jxr
— Seattle_L16n_H01u.jxr
— Seattle_L16u_H01n.jxr
7.29 Refe
...