Textile floor coverings — Colour fastness to shampooing

ISO 18168:2015 describes a method for determining the colour fastness of textile floor coverings and yarns, loose fibres and tufts extracted from textile floor coverings, to the action of a reference shampoo solution.

Revêtements de sol textiles — Solidité des coloris au shampooing

ISO 18168:2015 décrit une méthode de détermination de la solidité des coloris des revêtements de sol textiles et des fils, fibres en bourre et touffes provenant de revêtements de sol textiles, sous l'action d'une solution de shampooing de référence.

General Information

Status
Published
Publication Date
06-Dec-2015
Technical Committee
ISO/TC 219 - Floor coverings
Current Stage
9093 - International Standard confirmed
Start Date
01-Jun-2021
Completion Date
12-Feb-2026

Overview - ISO 18168:2015 (Colour fastness to shampooing)

ISO 18168:2015 specifies a laboratory method to determine the colour fastness to shampooing of textile floor coverings and of extracted yarns, loose fibres and tufts. The method uses a defined reference shampoo solution and controlled contact with specified adjacent fabrics to evaluate both change in colour of the specimen and staining of neighbouring materials, assessed with standardized grey scales.

Key topics and technical requirements

  • Test principle: specimen is immersed under pressure in a buffered shampoo solution (pH (7.5 ± 0.2)), dried separately and visually compared to original specimens using grey scales for change in colour and staining.
  • Shampoo solution: prepared from surfactants (1 g dodecyl sodium sulfate + 0.2 g lauric mono‑isopropanolamide or coconut diethanolamide per 500 ml), buffered with citric acid/disodium hydrogen phosphate, diluted to 1 L and pH‑adjusted as required.
  • Apparatus:
    • Stainless steel testing frame applying 12.5 kPa pressure with a 5 kg mass (base 60 × 115 mm).
    • Flat-bottom dish, pH meter (±0.02), and ovens (specified temperatures appear at 37 ± 2 °C and 40 ± 2 °C).
  • Specimen and adjacent fabric sizes:
    • Floor covering specimens: 100 × 40 mm, adjacent fabrics 50 × 40 mm.
    • Yarns/loose fibres: yarns sewn to adjacent fabric (100 × 40 mm); 0.4 g yarn or fibre used.
    • Tufts: compressed 0.4 g layer between adjacent fabrics; cotton support specified for tufts.
  • Adjacent fabric matrix: Table 1 in the standard prescribes which adjacent fibres to use (e.g., cotton vs wool, polyamide vs wool/viscose, polyester vs wool/cotton).
  • Procedure details: liquor-to-goods ratio ≥ 10:1; initial immersion at (37 ± 2) °C for 15 min, followed by a further 1.5 h under plate or weight; hydro-extract and dry (not exceeding 60 °C) before assessment.
  • Test report must reference ISO 18168, identify samples, list numerical ratings for change in colour and staining, and note any deviations.

Applications and who uses ISO 18168:2015

  • Carpet and textile floor covering manufacturers - product development, quality control and claims verification.
  • Independent testing laboratories - standardized assessment for customer and regulatory requirements.
  • Specifiers, procurement and retailers - comparative performance data for product selection.
  • R&D and dyeing specialists - evaluate dye stability and interactions with cleaning products, including shampoo formulations.
  • Certification and compliance bodies - harmonized method for test evidence.

Related standards

  • ISO 2424 (vocabulary for textile floor coverings)
  • ISO 105 series (grey scales and colour fastness test principles, e.g., ISO 105‑A01/A02/A03)
  • ISO 105‑Fxx parts (specifications for adjacent fabrics)
  • National equivalents cited in the bibliography: AS/NZS 2111.19.2 and BS 1006

Keywords: ISO 18168:2015, colour fastness to shampooing, textile floor coverings, shampoo solution, adjacent fabrics, testing frame, grey scale, carpet testing.

Standard

ISO 18168:2015 - Textile floor coverings -- Colour fastness to shampooing

English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 18168:2015 - Revêtements de sol textiles -- Solidité des coloris au shampooing

French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

Control Union Certifications

Global certification for agriculture and sustainability.

RVA Netherlands Verified

Bureau Veritas Bangladesh

Bureau Veritas certification services in Bangladesh.

BAB Bangladesh Verified

ECOCERT France

Leader in organic and sustainability certification worldwide.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

ISO 18168:2015 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile floor coverings — Colour fastness to shampooing". This standard covers: ISO 18168:2015 describes a method for determining the colour fastness of textile floor coverings and yarns, loose fibres and tufts extracted from textile floor coverings, to the action of a reference shampoo solution.

ISO 18168:2015 describes a method for determining the colour fastness of textile floor coverings and yarns, loose fibres and tufts extracted from textile floor coverings, to the action of a reference shampoo solution.

ISO 18168:2015 is classified under the following ICS (International Classification for Standards) categories: 59.080.60 - Textile floor coverings; 97.150 - Floor coverings. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 18168:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 18168
First edition
2015-12-15
Textile floor coverings — Colour
fastness to shampooing
Revêtements de sol textiles — Solidité des coloris au shampooing
Reference number
©
ISO 2015
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and reagents . 1
5.1 Testing frame . 1
5.2 Auxiliary equipment . 1
5.3 Shampoo solution . 2
5.4 Adjacent fabrics . 2
5.4.1 Textile floor coverings . 2
5.4.2 Yarns or loose fibres . 2
5.4.3 Tufts . 2
5.5 Grey scales . 2
6 Preparation of test specimens . 3
6.1 General . 3
6.2 Textile floor covering . 3
6.3 Yarns . 3
6.4 Loose fibres and tufts . 3
7 Procedure. 3
8 Test report . 4
Bibliography . 5
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 219, Floor coverings.
iv © ISO 2015 – All rights reserved

INTERNATIONAL STANDARD ISO 18168:2015(E)
Textile floor coverings — Colour fastness to shampooing
1 Scope
This International Standard describes a method for determining the colour fastness of textile floor
coverings and yarns, loose fibres and tufts extracted from textile floor coverings, to the action of a
reference shampoo solution.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 2424, Textile floor coverings — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 2424 apply
...


NORME ISO
INTERNATIONALE 18168
Première édition
2015-12-15
Revêtements de sol textiles — Solidité
des coloris au shampooing
Textile floor coverings — Colour fastness to shampooing
Numéro de référence
©
ISO 2015
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – Tous droits réservés

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Appareillage et réactifs . 1
5.1 Structure d’essai . 1
5.2 Équipements auxiliaires . 1
5.3 Solution de shampooing . 2
5.4 Tissus témoins . 2
5.4.1 Revêtements de sol textiles . 2
5.4.2 Fils ou fibres en bourre . 2
5.4.3 Touffes . 2
5.5 Échelles des gris . 3
6 Préparation des éprouvettes . 3
6.1 Généralités . 3
6.2 Revêtement de sol textile . 3
6.3 Fils . 3
6.4 Fibres en bourre et touffes . 3
7 Mode opératoire. 3
8 Rapport d’essai . 4
Bibliographie . 5
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer
un engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à
l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes
de l’OMC concernant les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos —
Informations supplémentaires.
Le comité chargé de l’élaboration du présent document est l’ISO/TC 219, Revêtements de sol.
iv © ISO 2015 – Tous droits réservés

NORME INTERNATIONALE ISO 18168:2015(F)
Revêtements de sol textiles — Solidité des coloris au
shampooing
1 Domaine d’application
La présente Norme internationale décrit une méthode de détermination de la solidité des coloris des
revêtements de sol textiles et des fils, fibres en bourre et touffes provenant de revêtements de sol
textiles, sous l’action d’une solution de shampooing de référence.
2 Références normatives
Les documents ci-après, dans leur intégralité ou non, sont des références normatives indispensables à
l’application du présent document. Pour les références datées, seule l’édition citée s’applique. Pour les
références non datées, la dernière édition du document de référence s’applique (y compris les éventuels
amendements).
ISO 2424, Revêtements de sol textiles — Vocabulaire
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l’ISO 2424 s’appliquent.
4 Principe
Une éprouvette de revêtement de sol textile, de fil, fibres en bourre ou touffe, en contact avec des
tissus témoins spécifiés, est immergée sous pression dans une solu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...