IEC 62264-2:2004

INTERNATIONAL IEC

STANDARD 62264-2


First edition
2004-07

Enterprise-control system integration –
Part 2:
Object model attributes


Reference number
IEC 62264-2:2004(E)

---------------------- Page: 1 ----------------------
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
INTERNATIONAL IEC


STANDARD 62264-2


First edition
2004-07



Enterprise-control system integration –
Part 2:
Object model attributes

 IEC 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
IEC Copyright Office Case postale 56 CH-1211 Genève 20 Switzerland
• • •
PRICE CODE
XD

For price, see current catalogue

---------------------- Page: 3 ----------------------
– 2 – 62264-2 © IEC:2004(E)
CONTENTS
FOREWORD.7
INTRODUCTION.9
1 Scope.10
2 Normative references .10
3 Terms and definitions .10
4 Object model attributes.11
4.1 General .11
4.2 Attribute extensibility .11
4.3 Object model structure .11
4.4 Explanation of tables .12
4.5 Personnel.15
4.6 Equipment.18
4.7 Material .24
4.8 Process segment.29
4.9 Production capability .35
4.10 Process segment capability .43
4.11 Product definition .49
4.12 Production schedule.55
4.13 Production performance .64
4.14 Summary of objects.72
4.15 List of objects.74
5 Compliance .77

Annex A (informative) Use and examples.78
A.1 Use and examples.78
A.2 Application of the standard .81
A.3 Database mapping of the models.82
A.4 XML usage .83

Annex B (informative) Example data sets.87
B.1 Introduction .87
B.2 Material model example.87
B.3 Personnel model example .89
B.4 Equipment model example.90
B.5 Production capability example .91
B.6 Production performance example .92

Annex C (informative)  Questions and answers about object use .93
C.1 Introduction .93
C.2 Inflow materials .93
C.3 Multiple products per process segment.93
C.4 Process segments vs. product segments .94
C.5 Production parameter references.95

---------------------- Page: 4 ----------------------
62264-2  IEC:2004(E) – 3 –
C.6 How class name and property names are used to identify elements.96
C.7 Possible capability over-counts.97
C.8 Routing and process capability .98
C.9 Product and process capability dependencies.100
C.10 Representation of dependencies.101
C.11 Representation of material produced and consumed.102
C.12 Material produced and the capability model .102
C.13 How a material transfer is handled.102
C.14 Why the maintenance and QA models are different from the production model .103

Annex D (informative) Logical information flows.104

Figure 1 – Detailed relationship models .14
Figure 2 – Personnel model .15
Figure 3 – Equipment model .18
Figure 4 – Material model .24
Figure 5 – Process segment model .29
Figure 6 – Production capability model .35
Figure 7 – Process segment capability.43
Figure 8 – Product definition model.49
Figure 9 – Production schedule model .55
Figure 10 – Production performance model.64
Figure 11 – Object model inter-relationships .73
Figure A.1 – Personnel model.79
Figure A.2 – Instances of a person class .80
Figure A.3 – UML model for class and class properties .80
Figure A.4 – Class property .80
Figure A.5 – Instances of a person properties .81
Figure A.6 – Instances of person and person properties .81
Figure A.7– XML schema for a person object.84
Figure A.8 – XML schema for person properties.84
Figure A.9 – Example of person and person property.85
Figure A.10 – Example of person class information.85
Figure A.11 – Adaptor to map different property names and values.86
Figure C.1 – Class and property names used to identify elements .96
Figure C.2 – A property defining overlapping subsets of the capability.98
Figure C.3 – Routing for a product .99
Figure C.4 – Routing with co-products and material dependencies.99
Figure C.5 – Product and process capability relationships .100
Figure C.6 – Time-based dependencies .101
Figure C.7 – Maintenance schedule and performance model .103
Figure D.1 – Enterprise to manufacturing system logical information flows .104
Figure D.2 – Logical information flows among multiple systems .105

---------------------- Page: 5 ----------------------
– 4 – 62264-2 © IEC:2004(E)

Table 1 – UML notation used .12
Table 2 – Example table .13
Table 3 – Attributes of personnel class .15
Table 4 – Attributes of personnel class property .16
Table 5 – Attributes of person .16
Table 6 – Attributes of person property .17
Table 7 – Attributes of qualification test specification.17
Table 8 – Attributes of qualification test result.18
Table 9 – Attributes of equipment class .19
Table 10 – Attributes of equipment class property.19
Table 11 – Attributes of equipment .20
Table 12 – Attributes of equipment property.20
Table 13 – Attributes of equipment capability test specification.21
Table 14 – Attributes of equipment capability test result .21
Table 15 – Attributes of maintenance request .22
Table 16 – Attributes of maintenance work order .22
Table 17 – Attributes of maintenance response.23
Table 18 – Attributes of material class .24
Table 19 – Attributes of material class property .25
Table 20 – Attributes of material definition .25
Table 21 – Attributes of material definition property .25
Table 22 – Attributes of material lot .26
Table 23 – Attributes of material lot property.26
Table 24 – Attributes of material sublot.27
Table 25 – Attributes of QA test specification.27
Table 26 – Attributes of QA test result .28
Table 27 – Attributes of process segment .30
Table 28 – Attributes of personnel segment specification.30
Table 29 – Attributes of personnel segment specification property .31
Table 30 – Attributes of equipment segment specification .31
Table 31 – Attributes of equipment segment specification property .32
Table 32 – Attributes of material segment specification.32
Table 33 – Attributes of material segment specification property.33
Table 34 – Attributes of process segment parameter .33
Table 35 – Attributes of process segment dependency .34
Tabe 36 – Attributes of production capability .36
Table 37 – Attributes of personnel capability.37
Table 38 – Attributes of personnel capability property.38
Table 39 – Attributes of equipment capability.39

---------------------- Page: 6 ----------------------
62264-2  IEC:2004(E) – 5 –
Table 40 – Attributes of equipment capability property .40
Table 41 – Attributes of material capability .41
Table 42 – Attributes of material capability property.42
Table 43 – Attributes of process segment capability.44
Table 44 – Attributes of personnel segment capability .45
Table 45 – Attributes of personnel segment capability property.45
Table 46 – Attributes of equipment segment capability.46
Table 47 – Attributes of equipment segment capability property.46
Table 48 – Attributes of material segment capability .47
Table 49 – Attributes of material segment capability property .48
Table 50 – Attributes of product definition.50
Table 51 – Attributes of manufacturing bill .50
Table 52 – Attributes of product segment.51
Table 53 – Attributes of product parameter .51
Table 54 – Attributes of personnel specification .51
Table 55 – Attributes of personnel specification property .52
Table 56 – Attributes of equipment specification .52
Table 57 – Attributes of equipment specification property .53
Table 58 – Attributes of mmaterial specification .53
Table 59 – Attributes of material specification property .54
Table 60 – Attributes of product segment dependency .54
Table 61 – Attributes of production schedule .56
Table 62 – Attributes of production request.56
Table 63 – Attributes of segment requirement.57
Table 64 – Attributes of production parameter.58
Table 65 – Attributes of personnel requirement.58
Table 66 – Attributes of personnel requirement property .59
Table 67 – Attributes of equipment requirement .59
Table 68 – Attributes of equipment requirement property .60
Table 69 – Attributes of material produced requirement .60
Table 70 – Attributes of material produced requirement property .61
Table 71 – Attributes of material consumed requirement.61
Table 72 – Attributes of material consumed requirement property .62
Table 73 – Attributes of consumable expected .62
Table 74 – Attributes of consumable expected property .63
Table 75 – Attributes of production performance.65
Table 76 – Attributes of production response .65
Table 77 – Attributes of segment response .66
Table 78 – Attributes of production data.67
Table 79 – Attributes of personnel actual .67
Table 80 – Attributes of personnel actual property .68
Table 81 – Attributes of equipment actual .68
Table 82 – Attributes of equipment actual property .69

---------------------- Page: 7 ----------------------
– 6 – 62264-2 © IEC:2004(E)
Table 83 – Attributes of material produced actual .69
Table 84 – Attributes of material produced actual property.70
Table 85 – Attributes of material consumed actual .70
Table 86 – Attributes of material consumed actual property .71
Table 87 – Attributes of consumable actual.71
Table 88 – Attributes of consumable actual property.72
Table 89 – Personnel model objects .74
Table 90 – Equipment model objects .74
Table 91 – Material model objects .74
Table 92- Process segment model objects .75
Table 93 – Production capability model objects.75
Table 94 – Process segment capability model objects.75
Table 95 – Product definition object models.75
Table 96 – Production schedule model objects .76
Table 97 – Production performance object models .76
Table A.1 – Attributes of person.79
Table A.2 – Database structure for person.82
Table A.3 – Database structure for person property .82
Table A.4 – Database for person with data .82
Table C.1 – Definition of segment types.95

---------------------- Page: 8 ----------------------
62264-2  IEC:2004(E) – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ENTERPRISE-CONTROL SYSTEM INTEGRATION –

Part 2: Object model attributes


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62264-2 has been prepared by subcommittee 65A: System
aspects, of IEC technical committee 65: Industrial-process measurement and control, and ISO
SC5, JWG 15, of ISO technical committee 184: Enterprise-control system integration.
It is published as double logo standard.
This standard is based upon ANSI/ISA-95.00.02-2001, Enterprise-Control System Integration,
Part 2: Object Model Attributes. It is used with permission of the copyright holder, the
1
Instrumentation, Systems and Automation Society (ISA) . ISA encourages the use and
application of its industry standards on a global basis.
___________
1
 For information on ISA standards, contact ISA at: ISA – The Instrumentation, Systems and Automation Society,
PO Box 12277, Research Triangle Park, NC 27709, USA, Tel. 1+919.549.8411, URL: standards.isa.org.

---------------------- Page: 9 ----------------------
– 8 – 62264-2 © IEC:2004(E)
This standard was submitted to the National Committees for voting under the Fast Track
Procedure as the following documents:
FDIS Report on voting
65A/408/FDIS 65A/416/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table. In ISO, the standard has been approved by 10 P members
out of 11 having cast a vote.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 62264 consists of the following p
...